Reflective Display Technology: Using Pigments and Structural Colors

Reflective Display Technology: Using Pigments and Structural Colors

Source: E-Ink Inc.

Key Terms

  • E Ink
  • E Paper
  • ACeP (Advanced Colors e Paper)
  • E Readers
  • Note/Writing Pads
  • E Labels
  • E TAG
  • E Newspaper
  • E Whiteboard
  • ESL (Electronic Shelf Label)
  • Signage
  • Displays
  • Reflective Displays
  • Flexible Displays
  • LCD/LED Displays
  • QLED
  • OLED (Organic Light Emitting Diodes)
  • AM-OLED
  • Electrowetting Display (EWD)
  • Glass Based e Paper
  • Flexible e Paper
  • CLEARInk (E Ink + LCD)
  • CFA (Color Filter Array)
  • Electrophoretic display (EPD)
  • OTFT (Organic Thin Film Transistors)
  • Flexible AM OLED
  • Flexible AM EPD
  • Active Matrix OLED (AM-OLED)
  • Organic Electronics
  • Flexible Electronics
  • Printed Electronics
  • Conjugated Conducting Polymers
  • Transparent Displays
  • Luminescent Displays
  • Passive Matrix (PM)
  • Reflective LCD
  • Transmissive LCD
  • Transflective LCD
  • Cholesteric Liquid Crystals
  • ElectroChromic Displays (ECD)
  • ElectroFluidic Displays (EFD)
  • Photonic Crystals Displays
  • Plasmonic Colors Displays

Source: Active control of plasmonic colors: emerging display technologies

Source: Review of Paper-Like Display Technologies

Technology of Dyes, Pigments, and Structural Colors

Source: Chromic Phenomena: Technological Applications of Colour Chemistry

Reflective Color Generation Technology in Displays

  • Pigmentation
  • Structural

Source: DYNAMICALLY TUNABLE PLASMONIC STRUCTURAL COLOR

Review Paper: A critical review of the present and future prospects for electronic paper

Review Paper: A critical review of the present and future prospects for electronic paper

Types of Reflective e-Paper Technologies
(Color and Monochrome)

  • Electrophoretic
  • In-plane Electrophoretic
  • Electrokinetic
  • Liquid Powder
  • Electrochromic
  • Electrowetting
  • Electrofluidic
  • MEMS (electromechanical interference modulation)
  • Cholesteric liquid-crystal displays (Kent Displays)

Source: Review of Display Technologies Focusing on Power Consumption

Electronic paper, popularly known as e-paper, can be defined as a dynamic display technology that emulates traditional paper. As LCD, e-paper belongs to the non-emissive display category but, in this case, no backlight is needed since the ambient light from the environment is enough.

The display is composed of millions of microcapsules containing positively charged white and negatively charged black particles suspended in a clear liquid, which are capable of producing the resolution only found in print. As they are bi-stable, they only consume power while the display is being updated. The power required for the update process depends on the size of the display.

The first commercial success of monochrome e-paper devices was due to the Electrophoretics technology, wrongly referred to as electronic paper displays (EPD), whose main exponent is microencapsulated electrophoretic displays, also known as e-ink [35]. Another similar approach, microcellular electrophoretic display films (SiPix), was bought by e-ink. There are other proprietary electrophoretic displays, which include Quick-Response Liquid Powder Display (QR-LPD) by Bridgestone [36], bichromal beads [37] by Xerox (Gyricon), or reverse emulsion electrophoretic display (REED) used by Zikon Corp.

Cholesteric liquid crystal (ChLCD), already mentioned as a subgroup of LCD, is generally classified as e-paper because of its zero consumption when it is not receiving screen updates.

Source: Review of Display Technologies Focusing on Power Consumption

A next generation of flexible, color and video e-paper is currently emerging. The most promising seems to be the electro-wetting approach (EWD) [38]. Its main component, liquavista (see Figure 3b), was developed by Philips but currently belongs to Amazon. Another interesting technology based on Interferometric Modulation (IMOD) is microelectromechanical sytems (MEMS) [39], whose potential has been demonstrated through several prototypes (trademarked Mirasol [40]) developed by Qualcomm.

Some other remarkable developments are the in-plane electrophoretics (IPE) patented by Canon [41] and HP’s Electrokinetic (EKD) [42], although they are at least several years away from a general market uptake [43].

Another less matured technology is electrofluidic [44], which presents the main novelty of using a three-dimensional microfluidic device structure and offering brilliantly colored aqueous pigment dispersions. Recently, other lines of investigation have aimed to simulate traditional paper through electronic paper made from microbial cellulose [45].

Source: Biological versus electronic adaptive coloration: how can one inform the other?

Other reflective liquid-crystal displays
  • Conventional reflective polarizer-based liquid crystal
  • Transflective liquid-crystal displays
  • Electromagnetic (EMD ) displays

  • Photonic Crystals Displays (P -Ink)
  • Plasmonic Structural Colors

Other Display Technologies
  • Bistable LCDs – Reflective – Cholesteric
  • Nemoptic – BiNem/OLED dual Mode Display- Sold rights to Seiko Japan
  • ZBD Display – PM-LCD Reflective Display – Acquired by New Vision Display China
  • Fujitsu’s Color E-paper Mobile Display – FLEPia – Discontinued 2010 

Reflective Displays using Pigments

  • Electrophoretic Displays
  • Electrowetting Displays
  • Electrochromic Displays

Electrophoretic Displays – Reflective

(eReaders and Note taking/Writing Pads)

(Monochrome and Color)

(EPD)

  • E ink
  • E Paper
  • Yotaphone
  • E Ink Triton
  • E Ink Triton 2
  • E Ink Kaleido
  • E Ink Kaleido 2
  • Hisense
  • Pocketbook
  • Onyx Boox Poke 2
  • Onyx Max Lumi
  • Quirk logic Papyr
  • Ratta Supernote A5X
  • Onyx Note Air
  • iReader
  • iFLYTEK
  • Amazon Kindle
  • Etch a Sketch
  • Magna Doodle
  • Remarkable 2
  • Ricoh Whiteboard 42 inch
  • Hisense A7 CC 6.7 Inch Smartphone
  • Kobo Libra H20
  • Amazon Paperwhite
  • Amazon Oasis
  • Bigme S3 7.8 Color E-reader
  • Kobo Nia e Readers
  • Boyue Likebook
  • Pocketbook Inkpad Color
  • Onyx Boox Poke 2 Color

Electrophoretic Displays – Reflective

Source: Stretchable and reflective displays: materials, technologies and strategies

Electrophoretic Display

Source: Review Paper: A critical review of the present and future prospects for electronic paper

In-plane Electrophoretic Display

Source: Review Paper: A critical review of the present and future prospects for electronic paper

ElectroKinetic Displays

Source: Review Paper: A critical review of the present and future prospects for electronic paper

Liquid Powder Display

Source: Review Paper: A critical review of the present and future prospects for electronic paper

Companies manufacturing Reflective Displays

The key players in the global e-paper display market are

  • Displaydata Ltd. (UK) 
  • Display Innovations (UK) 
  • Kent Displays, Inc. (USA) 
  • LANCOM Systems GmbH (Germany) 
  • Liquavista B.V. (The Netherlands) 
  • Xerox Corp. (USA) 
  • Zikon, Inc. (USA)
  • Qualcomm
  • Gamma Dynamics
  • ITRI
  • GUANGZHOU OED TECHNOLOGIES CO., LTD
  • InkCase Enterprise Pte Ltd
  • Plastic Logic HK Ltd
  • GDS Holding S.r.l.
  • Epson Europe Electronics GmbH
  • GDS S.p.a
  • Motion Display
  • MPicoSys Low Power Innovators
  • Omni-ID
  • Solomon Systech
  • E Ink Holdings Inc (Taiwan)
  • Sony Corporation (Japan)
  • Pervasive Display Inc (Taiwan)
  • Samsung Display Co, Ltd (South Korea)
  • LG Display Co Ltd. (South Korea)
  • Plastic Logic GmbH (Germany)
  • Cambrios Technologies Corporation (US)
  • Bridgestone Corporation (Japan)
  • Visionect (Slovenia)
  • CLEARink Displays (US)

Global E-Paper Display Market Scope and Market Size

E-paper display market is segmented on the basis of product, type, technology and end user. The growth among segments helps you analyse niche pockets of growth and strategies to approach the market and determine your core application areas and the difference in your target markets.
• E-paper display market on the basis of product has been segmented as e-readers, mobile devices, smart cards, poster & signage, auxiliary displays and electronic shelf label, and wearables.
• Based on technology, e-paper display market has been segmented into electrophoretic display, electrowetting display, cholesteric display, interferometric modular display, and others.
• On the basis of type, e-paper display market has been segmented into flat EPDs, curved EPDs, flexible EPDs, and foldable EPDs
• E-paper display has also been segmented on the basis of end user into automotive, consumer electronics, retail, healthcare and media & entertainment.

E-PAPER DISPLAYS EXPLAINED
We so often eulogise about the limitless possibilities e-paper displays enable and the exciting opportunities the technology creates for market growth, differentiation and competitive advantage — but for the uninitiated reader, we thought it might be helpful in this blog to take a step back and look at how e-paper works.

E-paper goes by many names and spellings — electronic paper, ePaper, electronic ink, e ink, electrophoretic displays, EPD — but all these terms effectively describe the same thing: an electrically-charged surface that replicates the look and experience of ink on paper.

Instead of a traditional display that uses backlighting to illuminate pixels, e-paper is based on the science of “electrophoresis” — i.e. the movement of electrically charged molecules in an electric field.

In every e-paper display there are millions of tiny microcapsules containing (negatively charged) black and (positively charged) white pigments suspended in a clear fluid. This encapsulated ‘ink’ is then printed onto a plastic film and laminated on to a layer of circuitry, or — to be even more specific — a transistor matrix layer. The circuitry forms a pattern of pixels that is then controlled by a display driver (EPD controller).

When a negative electric field is applied to the ‘ink’, the white particles move to the top of the capsule making the surface appear white at that specific spot. Reverse this process and the black particles appear at the top making the surface of the capsule appear dark. The technology can also work in colour in just the same way but using a combination of different colour pigments and electric charges, or just by adding a colour filter on top of the display.

The way e-paper works differs from traditional displays in two key ways:

E-paper screens are reflective — light from the environment is reflected from the surface of the e-paper display towards the user’s eyes, just like with traditional paper. This gives e-paper a wide viewing angle that is readable in direct sunlight.
E-paper screens are bi-stable — unlike conventional backlit flat panel LCD displays, which refresh about 30 times per second and require a constant power supply to maintain content, e-paper displays will hold a static image ‘forever’, even without electricity. E-paper only consumes power when the content on it changes – for example if an e-paper shelf label in a supermarket is updated with a new price. The rest of the time the display will simply show the content you want it to, where it doesn’t draw any power until the next update.

Making e-paper flexible

Here at Plastic Logic Germany, we took e-paper one stage further and successfully industrialised a process to create glass-free backplanes, which represents the transistor matrix layer mentioned above. We are the first company worldwide able to manufacture transistor arrays on plastic. Instead of using traditional silicon transistors, our active-matrix backplane consists of organic thin film transistors (OTFTs) made from the same plastic used to for cola bottles (PET). This means we can couple a flexible backplane with a flexible display medium, such as flexible OLED or flexible electrophoretic layer, to create a fully flexible display with limitless possibilities. In addition to the flexibility, our glass-free electrophoretic displays also more robust, shatterproof and lightweight compared to glass-based displays.

If you want to know more about flexible plastic e-paper display technology’s suitability for a given use case and to get some inspiration via the applications which are already successfully showcasing the opportunities and rewards achievable through flexible e-paper innovation check out our latest flexible e-paper whitepaper.

By Plastic Logic

Flexible Displays
  • Flat
  • Curved
  • Foldable
  • Rollable
  • Printable
  • Without Glass
  • On Plastic

Electrowetting Displays (EWD)
  • LiquaVista
  • Etulipa
  • ADT

CMY Colors vs RGB Colors

Source: Current commercialization status of electrowetting-on-dielectric (EWOD) digital microfluidics

The emergence of electrowetting-on-dielectric (EWOD) in the early 2000s made the once-obscure electrowetting phenomenon practical and led to numerous activities over the last two decades. As an eloquent microscale liquid handling technology that gave birth to digital microfluidics, EWOD has served as the basis for many commercial products over two major application areas: optical, such as liquid lenses and reflective displays, and biomedical, such as DNA library preparation and molecular diagnostics. A number of research or start-up companies (e.g., Phillips Research, Varioptic, Liquavista, and Advanced Liquid Logic) led the early commercialization efforts and eventually attracted major companies from various industry sectors (e.g., Corning, Amazon, and Illumina). Although not all of the pioneering products became an instant success, the persistent growth of liquid lenses and the recent FDA approvals of biomedical analyzers proved that EWOD is a powerful tool that deserves a wider recognition and more aggressive exploration. This review presents the history around major EWOD products that hit the market to show their winding paths to commercialization and summarizes the current state of product development to peek into the future. In providing the readers with a big picture of commercializing EWOD and digital microfluidics technology, our goal is to inspire further research exploration and new entrepreneurial adventures.

Source: Stretchable and reflective displays: materials, technologies and strategies

Liquavista technology was acquired by Samsung and then later was sold to Amazon. Amazon has put it on shelves.

Source: Biological versus electronic adaptive coloration: how can one inform the other?

Electrowetting Display

Source: Review Paper: A critical review of the present and future prospects for electronic paper

ElectroFluidic Display

Source: Review Paper: A critical review of the present and future prospects for electronic paper

Electrochromic Displays

  • mECD by RICOH
  • Transprint method

Source: IllumiPaper: Illuminated Interactive Paper

In general, display technologies can be classified in pixel-addressable high-resolution displays (e.g. OLED, e-paper) and in segment displays, which highlight predefined shapes based on electrochromism (EC) [2], thermochromism (TE) [31] or electroluminescence (EL) [1, 46]. Although advanced display types, such as e-paper, have promising properties (e.g., preserving content without battery), we focus on lightweight, low-current-consuming, segment-based EL and EC displays, which are robust, inexpensive and easy to integrate with pen interaction.

RDOT Tech

Source: Stretchable and reflective displays: materials, technologies and strategies

Electrochromic Displays

Source: Review Paper: A critical review of the present and future prospects for electronic paper

This technology was formerly by Swedish company Rdot, which was co-founded by Karlsson, and bought by Ynvisible Interactive of Vancouver. The company has prototyping capabilities in Linköping, Sweden and in Almada, Portugal, roll-to-roll production in Sweden, and R&D in Freiburg, Germany.

Printed Electrochromics boldly goes where no display has gone before

Ron Mertens

This is a sponsored post by Ynvisible

Example use-case for printed electrochromics, Ynvisible
Fig.1 Example use case for printed electrochromics: a shock detector smart label with an interactive printed interface.

Expanding Need for Simple Electronic Display Functionality

Rapid advances in the miniaturization and reduction of costs in computing, electronic sensing, and communications have allowed the integration of “smart” electronic functionality into almost everything. ”Intelligence” is now embedded into a wide range of everyday objects, and spread throughout our working and living environments. Much of this intelligence, data collection and transfer is hidden from the human senses, requiring little or no human involvement. But as the number of human daily touch points and interactions with smart devices grows, so too does the importance of user experience design and the role of displays.

Conventional electronic displays cannot be economically and sustainably applied into all smart objects and environments and can often times be functionality overkill for the simple display requirements of many everyday objects. Also, user experiences built around the need for extensive use of separate reading devices, e.g. RFID or Bluetooth readers in smart phones, can be increasingly challenging especially with the high number of distractions and strong competition for attention on mobile screens. Further with a doubling of screen time over the past four years among certain user demographics, there is also a growing sense of screen fatigue leading to people “detoxing” from light emitting screens while still valuing user interfaces that are useful yet unobtrusive.

“As technology becomes ubiquitous, it also becomes invisible.“
– Kevin Kelly, Wired magazine Founding Executive Editor

When technology becomes ubiquitous, it needs to seamlessly blend into the product and our surroundings. The user experience should be effortless. As the “computing” or intelligence blends into smart objects and environments, also the displays need to become more practical: i) eliminating the need for recharging or replacing of batteries, ii) eliminating the amount of effort to access information, and iii) be inexpensive for intended purpose.

Printed Electrochromics Brings Everyday Printable Objects and Surfaces to Life

Electrochromic devices (ECD) are electrochemical cells where color changes occur upon electrochemical reactions of two or more redox active electrochromic materials electrically connected by an external circuit and physically separated by an ionic conducting layer (electrolyte layer). Electrochromic materials and devices can be controlled to change their color and opacity by the application of electrical stimuli. ECDs are a non-light emitting reflective technology. Materials for ECD manufacture can be taken into the form of printable inks and the manufacturing processes made compatible with standard graphic printing and converting processes. The resulting device can be made thin, flexible, transparent, robust, and ultra low-power. As ECDs can be produced into a wide range of different shapes and sizes, they offer a wide range of advantages for product design and integration.

Ynvisible R2R production line at Linkoping, Sweden

Fig.2 Electrochromic devices can be printed in sheet-to-sheet or roll-to-roll. 
Ynvisible Production R2R line in Linköping, Sweden.

R&D toward printed electrochromics began in the 1990s. In recent years, with strong advances in printed electronic and hybrid electronic systems, developments of ECDs have made strong technical progress into mass-manufacturability. Electrochromic displays and visual indicators are now entering markets that are considered “blue ocean” from the perspective of the electronic display industry. In these market spaces conventional printed products and surfaces now meet electronics. The over 800 billion USD per year printing industry, and particularly the industrial printing sub-sector, are welcoming printed electronic systems with high level of interest.

Things Alive

Today Ynvisible Interactive Inc. (“Ynvisible”) is leading the charge to bring printed electrochromics into market. Ynvisible was established with the vision to bring everyday objects and surfaces to life benefitting people in a smart and connected world. The company’s mission is to provide practical human interfaces to smart everyday objects and ambient intelligence.
After early explorations into different chromogenic systems the company focused on developing electrochromics into a mass producible, ultra-low power consuming visual interface technology. The company now develops and commercializes different printed electrochromic systems on film materials. By combining other printed electronic components and microelectronics into the electrochromic system, the company designs and produces interactive graphic solutions for everyday smart objects and surfaces.

Ynvisible aims to be the leading supplier of design tools, inks and quality control systems for the design and production of interactive printed graphics based on printed electrochromics and other printed electronics technologies. The company is building its technology and products platform under the ynvisible™ brand (ynvisible is a registered trademark in certain countries and territories).

Temperature label electrochromic displays, Ynvisible

Fig. 3 Electrochromic displays on a temperature label provide clear visual indication and are 
easy to implement – user friendly and available in high volumes.

Ynvisible’s primary focus is on applications in retail and logistics (where ECDs are printed onto RFID tags and RF-based smart labels), premium consumer brand products, and healthcare and wellness (in particular medical and diagnostic devices). Today the company offers a full services package to help product developers and designers get started with printed electrochromics. Ynvisible’s design, prototyping, customer training and sheet-to-sheet production services are based in Almada, Portugal. The company’s inks development and R&D services are based in Freiburg, Germany. In Linköping, Sweden the company operates a roll-to-roll production facility with extensive printing, converting, and quality control system capabilities. In addition to high volume ECD printing, the high capacity production line is utilized for printing of other printed electronic components and systems. Ynvisible sells printed electronics production upscaling services to other product owning companies.

Ynvisible Interactive Inc. is a publicly traded company, listed in the Toronto Stock Exchange Venture list [TSXV:YNV], the OTC Markets [OTCQB:YNVYF] and the Frankfurt Stock Exchange [FRA:1XNA]

Getting Started With Printed Electrochromics

To learn more about Printed Electrochromics, Ynvisible is hosting a free webinar on Apr 2, 2020 12:00-1:00 PM in Eastern Time (US and Canada). The one hour webinar includes speakers from the Georgia Institute of Technology, NXN-IP and the University of Lapland. To register see: https://www.ynvisible.com/events

Printed paper label - with NFC antenna and a printed electrochromic display, Ynvisible

Fig.4 Printed paper label with printed NFC antenna and printed electrochromic display on the same substrate.
A collaboration between Arjowiggins and Ynvisible.

Worldwide Industry for Electrochromic Materials to 2025 – Impact of COVID-19

https://www.globenewswire.com/news-release/2021/01/11/2156399/0/en/Worldwide-Industry-for-Electrochromic-Materials-to-2025-Impact-of-COVID-19.html

Electrochromic Materials Market Landscape

Technology launches, acquisitions, and R&D activities are key strategies adopted by players in the electrochromic materials market. In 2019, the market of electrochromic materials has been consolidated by the top ten players accounting for 65.4% of the share. Major players in the electrochromic materials market are Gentex corporation, Saint Gobain, View, Inc., ChromoGenics, AGC, Inc., Changzhou Yapu New Materials Co. Ltd., Magna Glass and Window Company Inc., Econtrol-Glass Gmbh & Co. KG, Nikon Corporation, and Zhuhai Kaivo Optoelectronic Technology Co. Ltd. among others.

  • Electrochromic Materials
    • Metal Oxides
    • Viologens
    • Conducting Polymers
    • Prussian Blue
    • Others
  • Electrochromic Materials Market
    • Automotive Rear View Mirrors
    • Smart Glass Windows
    • Displays
    • Others

https://www.alliedmarketresearch.com/electrochromic-glass-market

ElectroChromic Glass Markets

Region wise, the market is segmented into North America, Europe, Asia-Pacific, and LAMEA. Europe was the highest revenue contributor in 2019. The presence of leading automotive manufacturers using electrochromic glass is expected to drive the growth of the market. Electrochromic glasses yield better energy savings and comfort and are increasingly used in panoramic roofing in cars. It is already being used in Mercedes-Benz SLK and SL roadsters. Similarly, in 2019, AGP Group, one of the world’s leading glazing manufacturers, opened its automotive glazing plant in Belgium for producing panoramic roofs with electrochromic glass. This trend indicates a growing market for electrochromic glasses in automotive applications.

Smartphone manufacturers are developing phones containing electrochromic glasses to increase their share in the global electrochromic glass market share. For instance, at CES 2020, Chinese phone maker, OnePlus announced Concept One phone that uses electrochromic glasses to hide its rear triple cameras, when not in use. This phone is not expected to be mass produced but it opens a new end-use for electrochromic glass in the smartphone market, which is largely dominated by countries such as China, India, and Japan. Further, China is one of the world’s largest smartphone makers.  

The major electrochromic glass manufacturers analyzed in this report include AGC Inc., ChromoGenics AB, Compagnie de Saint-Gobain S.A., Hitachi Chemical Co. Ltd., Kinestral Technologies Inc., Pleotint LLC, Polytronix Inc., Research Frontiers Inc., Smartglass International Ltd., and View Inc. To stay competitive, these market players are adopting different strategies such as product launch, partnership, merger, and acquisition. For instance, on December 2017, AGC, Kinestral Technologies Inc. and G-Tech Optoelectronics Corp. announced a joint venture that will sell, distribute, and service Halio smart glasses to the global market. The new ventures are Halio North America, Halio International, and Halio China. The joint venture helped AGC to increase its market revenue. 

Multilayered ECD by Ricoh using CMY Colors

Source: Multi-Layered Electrochromic Display

Reflective Displays based on Conventional LCD
  • Reflective LCD
  • Japan Display Inc – MIP Reflective LCD
  • Samsung – SR (Super Reflectance) LCD Technology

Types of Reflective LCDs

  • Direct View
  • Projection

Japan Display Inc.

Japan Display Inc (JDI) is an LCD technology joint venture by Sony, Toshiba, and Hitachi since 2012.

Memory-in-pixel (MIP) Reflective Color LCD

Japan Display Inc. (JDI), a leading global supplier of small- and medium-sized displays, has announced the start of sales of a standard line-up of memory-in-pixel (MIP) reflective-type color LCD modules for wristwatch-type wearable devices which realize ultra-low power consumption. Power consumption of these reflective-type LCD modules is less than 0.5%*1 that of transparent-type LCD modules.

Source: Japan Display Inc.

Source: JAPAN DISPLAY SHOWS LOW-POWER REFLECTIVE LCD THAT DOES COLOR, VIDEO

Emerging Display Technologies

  • MIP Reflective Color LCD for Ultra Low Power Consumption
  • Organic Electro-Luminescent (EL) display for High Contrast and Thin Structure
  • Transparent Display
  • Light field display (LFD) for 3D Definition (Holographic)
  • Micro LED display
  • Hybrid OLED and Reflective LCD

Transflective LCD Displays

Transflective LCDs combine elements of both transmissive and reflective characteristics. Ambient light passes through the LCD and hits the semi-reflective layer. Most of the light is then reflected back through the LCD. However some of the light will not be reflected and will be lost. Alternately a backlight can be used to provide the light needed to illuminate the LCD if ambient light is low. Light from the backlight passes through a semi-reflective layer and illuminates the LCD. However as with ambient lighting some of the light does not penetrate the semi-reflective layer and is lost.

Depends both on Transmission and Reflection.

Types of Transflective LCDs

Source: Fundamentals of Liquid Crystal Devices

Based on the light modulation mechanisms, transflective LCDs can be classified into four categories:

  • absorption type
  • scattering type
  • reflection type
  • phase retardation type

https://pid.samsungdisplay.com/en/learning-center/blog/reflective-display-technology

https://pid.samsungdisplay.com/en/learning-center/blog/reflective-display-technology

Color-reflective LCD based on cholesteric liquid crystals
  • Kent Displays Inc.
  • Cholesteric liquid crystal (CLC)
  • Kent State University/Deng-Ke Yang

Cholesteric liquid crystals (hereafter Ch LCs) are self-assembled systems consisting of elongated chiral organic molecules. They possess a helical structure where the local average direction of the molecules twists spatially around an orthogonal helical axis. Their refractive index varies periodically, and thus exhibits a Bragg reflection band centered at the wavelength λ = [(ne + no)/2]P and with the bandwidth Δλ = (ne – no)P, where ne and no are the extraordinary and ordinary refractive indices of the LC, respectively, and P is the helical pitch. They can be used to make reflective displays which do not need polarizers and have high reflectance.

Dr. J. William Doane is a world renowned expert in the field of liquid crystal materials and devices. Together with William Manning he co-founded Kent Displays, Inc. in 1993 and the company is now famous for its Cholesteric LCD based Boogie Board writing tablets that use Dr Doane’s inventions. Dr. Doane, was the director of the world-renowned Liquid Crystal Institute at Kent State University from 1983-1996 and led the effort during that time to establish the National Science Foundation Center for Advanced Liquid Crystalline Optical Materials (ALCOM). As an active member of the international science community, he has held visiting appointments and maintained cooperative research programs in several countries. Dr. Doane was instrumental in formalizing the International Liquid Crystal Society and served as the organization’s first treasurer from 1990-1996. Dr. Doane was named a Fellow of the American Physical Society in 1982 and retired from the Kent State University in 1996 after a 31-year teaching and administrative career. Dr. Doane received the first ever presentation of the Slottow-Owaki Prize for Display Education, by SID.

Source: Bistable Liquid Crystal Displays

Cholesteric LCD Display

Source: Review Paper: A critical review of the present and future prospects for electronic paper

Reflective Displays Using Structural Colors

  • Interferometric Modulator Display (IMOD)
  • Photonic crystal displays (P-Ink)
  • Plasmonic Structural Colors Displays

Source: : E SKIN Displays

A wide range of reflective displays have recently been developed, and Fig. XX compares several of the most prominent. Much like color generation in animals, reflective displays can be separated into the same two main categories; pigmentation and structural color. Under the tent of pigmentation are products such as e-ink based “E-readers”, and color filter based liquid crystal displays. E-readers use the translocation of 3 charged pigmented beads, and as such, require seconds to switch between images. Due to the macroscopic size of each pixel, resolution and color reproduction are also limited. Reflective liquid crystal displays are much quicker, taking only milliseconds to switch states, but are limited in brightness as polarizers immediately halve the amplitude of the reflected light. Many structural color based displays are currently in development and have only recently entered the market. One such device is an interferometric modulator produced by Qualcomm where within each pixel, a cavity is formed between a Bragg stack and a MEMs mirror. By controlling the cavity spacing, the reflected light experiences either constructive or destructive interference resulting in a bright color or dark state. While producing the signature bright vivid colors of Bragg reflection, the device is inherently angle sensitive and limited to rigid substrates. Another emerging structural color based device uses a photonic crystal made from silica spheres submerged within an electro-active polymer, and is branded Photonic Ink (P-ink). The polymer stretches as a field is applied, increasing the period of the photonic crystal and therefore the wavelength of reflected light. Though the colors are vivid and tunable, the response time of the polymer is tens of seconds, making video impossible. Cholesteric and blue phase LC displays behave in a similar manner. Helixes of LC form periodic nanostructures which produce Bragg reflections at desired wavelengths. The LC structures can be switched through an external field thereby producing dark and light states. While producing vivid color, these devices are limited in brightness as the helical structures only reflect circular light of the same handedness of the LC. By assessing current technologies we determine there is much to understand and develop in order to truly mimic color generation in nature. A fast response, angle independent LC-metasurface based display which can actively shift the color of its pixels from RGB to black holds the promise for development of truly thin-film flexible displays.

Interferometric Modulator Display (IMOD)

(Structural Interference Colors)

  • Qualcomm Mirasol
  • MEMS Micro-Electro-Mechanical-Systems

MEMS Display

Source: Review Paper: A critical review of the present and future prospects for electronic paper

Source: Biological versus electronic adaptive coloration: how can one inform the other?

Photonic crystal displays (P-Ink)

(Structural Colors)

  • Opalux
  • Nanobrick

Photonic Crystals Display

Source: Review Paper: A critical review of the present and future prospects for electronic paper

Source: Review Paper: A critical review of the present and future prospects for electronic paper

Photonic crystals refer to a class of structures that consist of periodic nanostructures with a spacing that interacts with the propagation of electromagnetic waves. Based on the spacing of the nanostructures, certain energy bands are allowed or forbidden for propagation, which can lead to the selective transmission or reflection of light. Dynamically changing the spacing of the nanostructures can change these propagation properties, leading to the modulation necessary to build a display. The term photonic crystal in displays is usually associated with three-dimensional periodic lattices, and the previously described MEMS interferometry (Sec. 1) is a special one-dimensional case of a photonic crystal.

Currently, there are two different photonic-crystal- based modulation approaches in development. Opalux is fabricating electrically color-tunable photonic crystals by embedding the lattices of 200-nm-diameter silica beads within an expandable electroactive polymer, which they call Photonic Ink or P-Ink.142 Opalux has demonstrated bistable P-Ink with a reflectance >50% and switching speed ~0.1 sec.143 The company has not described the viewing-angle dependence of their technology; photonic-crystal structures that possess highly regular crystal structures can show sharp dependences on illumination and viewing angles.

The company Nanobrick is developing systems that control the inter-particle distance of SiOx-encapsulated metal nanoparticles (20–30 wt.%) in electrophoretic colloidal suspension.144 These photonic crystal structures respond to signals of a few volts, shifting the reflected color through a continuous range as the average spacing changes. This enables full-spectrum tunability using a single electro-optic layer without requiring individual primary-color subpixels to generate color. It appears that the electrophoresis tends to randomize the structure somewhat, leading to reasonably wide viewing angles. Nanobrick has demonstrated a Color Tunable Photonic Crystal Display (CPD) with angle-independent optical responses (0–40°) using quasi-amorphous photonic pixels with response time <50 msec.145

While single-layer color tuning is a unique capability of the photonic-crystal approaches, the technology focus thus far has been limited to unit pixel or simple segments and still needs refinement in terms of the white state, reflectance vs. illumination condition, and demonstration with matrix addressing. Even though, in theory, colors such as red can be displayed at all pixels, white is still challenged because white will likely require additive display of side-by-side RGB pixels [similar to Fig. 2(b)]. Additionally, since pixels currently do not possess inherent gray scale, that means gray scale at the display level will require halftoning approaches.

Source: Stretchable and reflective displays: materials, technologies and strategies

Source: Stretchable and reflective displays: materials, technologies and strategies

Source: P-Ink and Elast-Ink from lab to market

Plasmonic Structural Colors Displays

Source: Dynamic plasmonic color generation enabled by functional materials

Structural colors, well known from coloration in nature (7), can overcome these limitations. Different from dyes and pigments, structural colors are generated by the interaction of light with micro- and nanostructures. Vibrant colors can be produced with the same materials (e.g., metals or dielectrics) by changing the geometries, dimensions, or arrangements of the structures through the fabrication process or even after fabrication (8). Compared to pigment or dye-based coloration, colors created in this case are much brighter due to their inherently high scattering/absorption efficiencies. As a result, thin layers, or more precisely tiny volumes, are sufficient for brilliant coloration. The benefit of these small coloration volumes is obvious. Ultrahigh-resolution images composed of subwavelength pixels with sizes down to the smallest coloring unit, e.g., a single micro- or nanostructure, can be printed (9). In addition, structural colors do not fade over time but provide a basically everlasting coloration due to the stability of the coloring structures. These appealing advantages have attracted great interest and stimulated intensive research on various structural coloration schemes based on metal nanostructures, dielectric metasurfaces, photonic crystals, and Fabry-Perot (FP) resonances (61017).

Source: Plasmonic Color Makes a Comeback

Plasmonic color is a subset of structural color, which is color resulting when the micro- or nanostructure of a material causes light scattering and interference. One form of structural color is the iridescent blue of the Morpho butterfly’s wings, whose scales have branched nanostructures that scatter light in complex ways. In plasmonic color, the color arises from light absorption and scattering off of the nanoparticles themselves. As with other forms of structural color, size, shape, and patterning create the color rather than chemical composition.

Source: Plasmonic Color Makes a Comeback

The Naval Research Laboratory’s Fontana has a different approach to making dynamic plasmonic displays: using self- assembled colloidal gold nanorods suspended in toluene. By placing an electric field across the suspension, the nanorods align in the direction of the applied field, producing intense plasmonic color, Fontana explains. The system is fast; it can switch at least 1,000 times as quickly as a conventional liquid-crystal pixel, potentially cutting down on motion blur, which is a problem with LCD displays.

Source: Plasmonic Color Makes a Comeback

In current commercial displays, each pixel is actually made of a red, green, and blue subpixel. Different amounts of light from each subpixel mix to create the perception of any color desired. One ambition for those developing plasmonic color systems is to flip one pixel between red, green, and blue rather than needing three separate subpixels that would require less space, allowing for much smaller pixels and higher definition screens. A system that can do just that has been created in the lab of Jeremy Baumberg at the University of Cambridge. It uses gold nanoparticles coated in the conducting polymer polyaniline and sprayed onto a flexible mirrored surface. The mirrored surface amplifies the plasmonic resonance, resulting in a more intense, uniform color with no viewing-angle dependence.

The color of each pixel is tuned by the reversible oxidation and reduction of the polymer, which changes the polymer’s refractive index and shifts the system’s plasmonic resonance. Each nanoparticle can theoretically be tuned independently, providing a potential spatial resolution of less than 100 nm. So far, the researchers have created pixels that switch only between red and green, but they are working on blue. Silver or aluminum particles could potentially show blue color, but “there is always a trade- off, as silver and aluminum materials are chemically [more] unstable [than gold],” says Hyeon-Ho Jeong, who formerly worked as a postdoc with Baumberg at Cambridge and is now at Gwangju Institute of Science and Technology.

Key Terms

  • Plasmonic Metasurfaces
  • Plasmonic Nanostructures
  • Conjugated Polymers
  • Plasmons
  • Metallic Nanostructures
  • Functional Materials
  • Plasmonic Resonances
  • Liquid Crystals plus plasmonic nanostructure
  • Metal surface plasmonics
  • Nanowire waveguides
  • Meta-materials
  • Quantum dots (QDs)
  • Nano Hole Array NHA
  • Dielectric Metasurfaces
  • Tunable Color Filters
  • Metal-Insulator-Metal Resonators (MIM)
  • Sub Wavelength Grating SWG
  • Subwavelength metal–insulator–metal stack arrays
  • Nanowire Color Filter
  • Metasurface Color Filter
  • Quantum Dot Color Filter
  • Plasmonic hole array color filters

  • Debashis Chanda, a nanophotonics scientist at the University of Central Florida
  • E-skin Displays, in 2017

Source: Plasmonic Metasurfaces with Conjugated Polymers for Flexible Electronic Paper in Color

Transmissive Displays

Emmisive Displays
  • LED
  • True QLED
  • OLED
  • AM-OLED
  • Mini-LED
  • Micro LED

All QLED panels are made by Samsung. QLED really is LCD panel It requires back lighting.

All OLED panels are made by LG Displays.

Please see my post on LCD and LED displays.

Transmitive Displays
  • LCD
  • AM LCD
  • PMLCD

Please see my post on LCD and LED displays.

Transmissive liquid crystal displays (LCDs) have been widely used in laptop computers, desktop monitors, and high-definition televisions (HDTVs).

TFT- AMLCD

Source: Review of Display Technologies Focusing on Power Consumption

In AMLCD, a switch is placed at each pixel which decouples the pixel-selection function. Thin Film Transistor (TFT), the main technology of the AMLCD subgroup, can also be divided regarding the material used for its elaboration, into amorphous silicon (a-Si), continuous grain silicon (CGS) and low temperature polycrystalline silicon (LTPS TFT). A new approach is the indium-gallium-zinc- oxide (IGZO) technology developed by Sharp.

Another issue to take into account is the liquid crystal alignment mode, where Twisted Nematic (TN) and Super-Twisted Nematic (STN) types are the simplest and least expensive, but offering a poor viewing angle (of approx. 45 degrees). Vertical Alignment (VA) technology generally appears under various trade names (ASV by Sharp, PVA by Samsung, etc.) and tries to improve the viewing angle of the device (for instance, Ampire VA device offers 160 degrees versus the 45 of the TN device by AUO). In-plane switching (IPS TFT), as the Hitachi module from the table shows, also has a better viewing angle than TN and the color and contrast is also improved.

My related posts

On Light, Vision, Appearance, Color and Imaging

Digital Color and Imaging

Color and Imaging in Digital Video and Cinema

Shapes and Patterns in Nature

Growth and Form in Nature: Power Laws and Fractals

On Luminescence: Fluorescence, Phosphorescence, and Bioluminescence

Color Change: In Biology and Smart Pigments Technology

Optics of Metallic and Pearlescent Colors

Nature’s Fantastical Palette: Color From Structure

Color Science of Gem Stones

Color Science and Technology in LCD and LED Displays

Key Sources of Research

CLEARink

Waveshare

A Review of Electronic Paper Display Technologies from the Standpoint of SID Symposium Digests

Tatsumi Takahashi

TCL NXTPAPER wants to compete against E INK

September 3, 2020 By Michael Kozlowski 

Review of Paper-Like Display Technologies

Peng Fei Bai1, Robert A. Hayes1, Ming Liang Jin1, Ling Ling Shui1, Zi Chuan Yi1, L. Wang1, Xiao Zhang1, and Guo Fu Zhou1, 2

Progress In Electromagnetics Research, Vol. 147, 95–116, 2014

Stretchable and reflective displays: materials, technologies and strategies

Nano Convergence volume 6, Article number: 21 (2019)

https://nanoconvergencejournal.springeropen.com/articles/10.1186/s40580-019-0190-5

Review Paper: A critical review of the present and future prospects for electronic paper

Jason Heikenfeld (SID Senior Member) Paul Drzaic (SID Fellow)
Jong-Souk Yeo (SID Member)
Tim Koch (SID Member)

Journal of the SID 19/2, 2011

Electrowetting-Based Displays: Bringing Microfluidics Alive On-Screen

B. J. Feenstra1, R. A. Hayes, R. van Dijk, R. G. H. Boom, M. M. H. Wagemans, I. G. J. Camps, A. Gi- raldo and B. v.d. Heijden
Philips Research Laboratories, Prof. Holstlaan 4, 5656 AA, Eindhoven, The Netherlands

Biological versus electronic adaptive coloration: how can one inform the other?

Eric Kreit1, Lydia M. Ma ̈thger2, Roger T. Hanlon2, Patrick B. Dennis3, Rajesh R. Naik3, Eric Forsythe4 and Jason Heikenfeld1

J R Soc Interface 10: 20120601.

https://royalsocietypublishing.org/doi/pdf/10.1098/rsif.2012.0601

Transmissive/Reflective Structural Color Filters: Theory and Applications


Yan Yu,1,2 Long Wen,2 Shichao Song,2 and Qin Chen

Volume 2014 |Article ID 212637 | https://doi.org/10.1155/2014/212637

https://www.hindawi.com/journals/jnm/2014/212637/

Interferometric modulator display

https://en.wikipedia.org/wiki/Interferometric_modulator_display

Qualcomm resurrects Mirasol reflective displays with new 576 ppi smartphone panel

https://www.theverge.com/2013/5/22/4354642/high-res-mirasol-display-for-smartphones-demonstrated

Iridescence-controlled and flexibly tunable retroreflective structural color film for smart displays

  • Wen Fan
  • Jing Zeng
  • Qiaoqiang Gan
  • Dengxin Ji
  • Haomin Song
  • Wenzhe Liu
  • Lei Shi
  • Limin Wu

Science Advances  09 Aug 2019:
Vol. 5, no. 8, eaaw8755
DOI: 10.1126/sciadv.aaw8755

https://advances.sciencemag.org/content/advances/5/8/eaaw8755.full.pdf

Artificial Structural Color Pixels: A Review 

by Yuqian Zhao 1Yong Zhao 1,*Sheng Hu 1Jiangtao Lv 1Yu Ying 2Gediminas Gervinskas 3 and Guangyuan Si 

Materials 201710(8), 944; https://doi.org/10.3390/ma10080944

https://www.mdpi.com/1996-1944/10/8/944/htm

Dynamically Tunable Plasmonic Structural Color

Daniel Franklin
University of Central Florida 2018

PHD Thesis

https://stars.library.ucf.edu/cgi/viewcontent.cgi?article=6880u0026amp;context=etd

Colors with plasmonic nanostructures: A full-spectrum review 

Applied Physics Reviews 6, 041308 (2019); https://doi.org/10.1063/1.5110051

https://aip.scitation.org/doi/abs/10.1063/1.5110051?journalCode=are

Dynamic plasmonic color generation enabled by functional materials

Frank Neubrech1,2, Xiaoyang Duan1,2, Na Liu3,4*

Bright and Vivid Diffractive–Plasmonic Reflective Filters for Color Generation

  • Emerson G. Melo, 
  • Ana L. A. Ribeiro, 
  • Rodrigo S. Benevides, 
  • Antonio A. G. V. Zuben, 
  • Marcos V. Puydinger dos Santos, 
  • Alexandre A. Silva, 
  • Gustavo S. Wiederhecker, and 
  • Thiago P. M. Alegre*

ACS Appl. Nano Mater. 2020, 3, 2, 1111–1117Publication Date:December 31, 2019 https://doi.org/10.1021/acsanm.9b02508

https://pubs.acs.org/doi/full/10.1021/acsanm.9b02508

Active control of plasmonic colors: emerging display technologies

Kunli Xiong, Daniel Tordera, Magnus Jonsson and Andreas B. Dahlin

Rep Prog Phys. 2019 Feb;82(2):024501.

doi: 10.1088/1361-6633/aaf844.

https://pubmed.ncbi.nlm.nih.gov/30640724/

Self-assembled plasmonics for angle-independent structural color displays with actively addressed black states

Daniel Franklina,b, Ziqian Hec, Pamela Mastranzo Ortegab, Alireza Safaeia,b, Pablo Cencillo-Abadb, Shin-Tson Wuc, and Debashis Chandaa,b,c,1

https://www.pnas.org/content/117/24/13350

Bio-inspired intelligent structural color materials

Luoran Shang, Weixia Zhang, Ke Xuc and Yuanjin Zhao

Mater. Horiz., 2019,6, 945-958 

https://pubs.rsc.org/en/content/articlelanding/2019/mh/c9mh00101h#!divAbstract

Advanced Plasmonic Materials for Dynamic Color Display

DOI: 10.1002/adma.201704338

https://www.researchgate.net/publication/320997060_Advanced_Plasmonic_Materials_for_Dynamic_Color_Display

Polarization-independent actively tunable colour generation on imprinted plasmonic surfaces

Nature Communications volume 6, Article number: 7337 (2015)

https://www.nature.com/articles/ncomms8337

Tunable plasmonic color filter 

Rosanna Mastria, Karl Jonas Riisnaes, Monica Craciun, and Saverio Russo

Frontiers in Optics / Laser Science OSA Technical Digest (Optical Society of America, 2020),paper JTh4B.7•

https://doi.org/10.1364/FIO.2020.JTh4B.7

https://www.osapublishing.org/abstract.cfm?uri=FiO-2020-JTh4B.7

Reflective Display Technology

Samsung 2017

https://pid.samsungdisplay.com/en/learning-center/blog/reflective-display-technology

Modeling of Oil/Water Interfacial Dynamics in Three-Dimensional Bistable Electrowetting Display Pixels

Guisong Yang, Lei Zhuang, Pengfei Bai,* Biao Tang, Alex Henzen, and Guofu Zhou

CS Omega 2020, 5, 10, 5326–5333Publication Date:March 3, 2020https://doi.org/10.1021/acsomega.9b04352

https://pubs.acs.org/doi/10.1021/acsomega.9b04352

The E-Paper Revolution Has Begun

Mon, September 09, 2019

https://www.radiantvisionsystems.com/blog/e-paper-revolution-has-begun

Global E-Paper Display Market Growth Prospects, Key Vendors, Future Scenario Forecast To 2027 | CLEARink Displays, Inc., E Ink Holdings Inc

07-07-2020

https://www.openpr.com/news/2086154/global-e-paper-display-market-growth-prospects-key-vendors

e-Paper Display Markets 2016-2024: e-Readers, Signage/Poster Devices, Mobile Phones, & Others – Global Analysis, Trends, and Forecasts Report 2019

2019

https://www.globenewswire.com/news-release/2019/05/31/1860959/0/en/e-Paper-Display-Markets-2016-2024-e-Readers-Signage-Poster-Devices-Mobile-Phones-Others-Global-Analysis-Trends-and-Forecasts-Report-2019.html

Worldwide E-Paper Display Market Share, Growth, Statistics, by Application, Production, Revenue & Forecast up to 2027

https://www.mccourier.com/worldwide-e-paper-display-market-share-growth-statistics-by-application-production-revenue-forecast-up-to-2027/

Clearink Displays

https://www.clearinkdisplays.com/about-us

What Happened to Liquavista Electrowetting Display?

https://lookgadgets.com/liquavista/

Etulipa brings its electrowetting display off-the-grid

23 October 2019
BART BROUWERS

How Electronic Ink Was Invented

OLED vs. LED: Which kind of TV display is better?

By Michael Bizzaco Simon Cohen and Tyler LacomaJanuary 21, 2021

https://www.digitaltrends.com/home-theater/oled-vs-led/

E-INK AND E-PAPER: A HISTORY, ROOM SIGNS AND MORE

https://www.visix.com/resources/blog/e-ink-and-e-paper-a-history-room-signs-and-more/

11 Myths About E-paper Displays

https://www.electronicdesign.com/technologies/embedded-revolution/article/21805149/11-myths-about-epaper-displays

Good E Reader.com

https://goodereader.com/blog/

DKE E PAPER Manufacturer

E Ink.com

Pervasive Displays

https://www.pervasivedisplays.com

World’s Largest ePaper E Ink Sign Unveiled at UN Headquarters

https://www.mpicosys.com/news/worlds-largest-epaper-e-ink-sign-unveiled-un-headquarters/

ONYX BOOX

https://www.boox.com

Plastic Logic

E Paper Displays Explained

E Ink, Innolux deliver 28-inch ePaper

https://www.digitalsignagetoday.com/news/e-ink-innolux-deliver-28-inch-epaper/

E Ink and Plastic Logic Partner to Provide the World’s First Flexible Advanced Color ePaper (ACeP™)-Based Display

https://www.businesswire.com/news/home/20201203005052/en/E-Ink-and-Plastic-Logic-Partner-to-Provide-the-World’s-First-Flexible-Advanced-Color-ePaper-ACeP™–Based-Display

Ossia, E-PEAS, and E Ink Debut E-Paper Electronic Shelf Label Powered by Wireless Energy Harvesting

July 28, 2019 by Scott McMahan

https://eepower.com/news/ossia-e-peas-and-e-ink-debut-e-paper-electronic-shelf-label-powered-by-wireless-energy-harvesting/#

PicoSign

Visionect and E Ink Launch Prototyping System for Developing Large-Format ePaper Signs

the-ebook-reader.com

https://www.the-ebook-reader.com/e-ink.html

Electronic Ink

http://www2.units.it/ramponi/teaching/DIP/materiale/z04_disp_e-ink.pdf

E -Ink

https://www.eink.com/

Invited Paper: TFT Technologies for Flexible Displays

Jin Jang Min Hee Choi Jun Hyuk Cheon

First published: 05 July 2012 

https://doi.org/10.1889/1.3499860

https://onlinelibrary.wiley.com/doi/abs/10.1889/1.3499860

A Review In Preparation of Electronic Ink for Electrophoretic Displays

S.KholghiEshkalak*, M.Khatibzadeh

PROCEEDINGS OF THE INTERNATIONAL CONFERENCE NANOMATERIALS:APPLICATIONS AND PROPERTIES

Vol.3 No2,02 NAESF06 (5pp)(2014)

https://core.ac.uk/reader/141442140

Flexible Electronics Development in Taiwan

Dr. Janglin (John) Chen
Vice President & General Director Display Technology Center

ITRI

2010

TFT Technology for Flexible Display Applications

Chang-Dong Kim, In Byeong Kang, and In-Jae Chung

LCD R&D Center, LG.Philips LCD, 533, Hogae-dong, Dongan-gu, Anyang-shi, Kyoungki-do, 431-080, KOREA

Progress and Challenges in Commercialization of Organic Electronics

Yueh-Lin Loo and Iain McCulloch, Guest Editors

MRS BULLETIN • VOLUME 33 • JULY 2008

Evaluating Display Reflections in Reflective Displays and Beyond

https://onlinelibrary.wiley.com/doi/pdf/10.1002/msid.1099

Active Matrix Electrophoretic E-Book Display

Guofu Zhouand Mark Johnson
Philips Research, High Tech Campus, Building 34, Eindhoven 5656 AE, The Netherlands

Karl Amundson and Robert W Zehner
E Ink Corporation, 733 Concord Avenue, Cambridge, MA 02138 USA

Alex Henzen and Jan van de Kamer
IRex Technologies BV, High Tech Campus, Building 46, Eindhoven 5656 AE, The Netherlands

Inkjet-printed polymer-based electrochromic and electrofluorochromic dual-mode displays†

Manuel Pietsch, Tobias Rödlmeier, Stefan Schlisske

Johannes Zimmermann, Carlos Romero-Nieto and Gerardo Hernandez-Sosa

J. Mater. Chem. C, 2019, 7, 7121

https://pubs.rsc.org/en/content/articlehtml/2019/tc/c9tc01344j

Invited Paper: International Standards Development of Electronic Paper Displays

Tatsumi Takahashi

First published: 29 May 2019

SID Volume50, Issue1
June 2019
Pages 398-401

https://onlinelibrary.wiley.com/doi/abs/10.1002/sdtp.12941

Dyed Polymeric Microparticles for Colour Rendering in Electrophoretic Displays

Mark Goulding, Louise Farrand, Ashley Smith, Nils Greinert, Henry Wilson, Claire Topping, Roger Kemp, Emily Markham, Mark James, Johannes Canisius, Dan Walker
Merck Chemicals Ltd., Advanced Technologies, Chilworth Technical Centre, University Parkway, Southampton, Hampshire, SO16 7QD, UK

Richard Vidal, Sihame Khoukh

Merck Chimie, Center Production ESTAPOR, Zone Industrielle, Rue du Moulin de la Canne, 45 300 Pithiviers, France.

Seung-Eun Lee, Hee-Kyu Lee

Merck Advanced Technologies, Poseung Technical Center, 1173-2 Wonjyung-ri, Poseung-myun, Pyungtaek-si, Kyungki-do, Korea

E-paper Display (EPD) Market Size 2020-2024 Industry News Analysis, Upstream Raw Material Suppliers, Major Players and Product Types

2020

https://www.wfmj.com/story/42526423/e-paper-display-epd-market-size-2020-2024-industry-news-analysis-upstream-raw-material-suppliers-major-players-and-product-types

E Ink Holdings, electronic ink technology, and Fujitsu Semiconductor have developed a reference design board for battery-less ePaper tags using E Ink’s ePaper and Fujitsu’s UHF (Ultra High Frequency) band.

Printing Technologies for Organic TFT Array for Electronic Paper

Ryohei Matsubara, Yukari Harada, Kaoru Hatta,

Takumi Yamamoto, Manabu Takei, Mamoru Ishizaki,

Mitsuyoshi Matsumura, Kenich Ota, and Manabu Ito

Display Research Laboratory, Technical Research Institute, Toppan Printing Co., Ltd., Saitama, Japan

CYM and RGB colored electronic inks based on silica-coated organic pigments for full-color electrophoretic displays 

Peipei Yin,aGang Wu,*aWenlong Qin,aXiaoqiang Chen,aMang Wanga  and  Hongzheng Chen*a

https://pubs.rsc.org/no/content/articlelanding/2013/tc/c2tc00344a/unauth#!divAbstract

Hisense A7CC 5G smartphone integrates a 6.7-inch color E-Ink display

Bistable electrowetting displays

Karlheinz Blankenbach

Juergen Rawert

January 2011
DOI: 10.1117/2.1201012.003407

https://www.researchgate.net/publication/315169299_Bistable_electrowetting_displays

Current commercialization status of electrowetting-on-dielectric (EWOD) digital microfluidics

Jia Li and Chang-Jin “CJ” Kim

Lab Chip, 2020,20, 1705-1712 

https://pubs.rsc.org/en/content/articlelanding/2020/lc/d0lc00144a/unauth#!divAbstract

The complete history of E INK Color E-Paper

November 22, 2020 

A Short History of E-Paper and the eReader Revolution

August 11, 2017 By Michael Kozlowski

https://goodereader.com/blog/electronic-readers/a-short-history-of-e-ink-and-the-ereader-revolution

A Short History of E-Ink: How E Ink managed to become the last man standing and dominated the e-reader revolution!

by Michael Kozlowski

book

2018

Electrochromic Plasmonic Metasurfaces for Reflective Displays 

By Kunli Xiong

2017

https://core.ac.uk/display/128708224

Switching Colors with Electricity

BY  ROGER J. MORTIMER

https://www.americanscientist.org/article/switching-colors-with-electricity

MicroLED vs OLED: the battle of the high-end display tech

Can the next-gen TV tech microLED beat out OLED?

https://www.techradar.com/news/microled-vs-oled-the-battle-of-the-high-end-display-tech

OLED vs QLED: the premium TV panel technologies compared

https://www.techradar.com/news/oled-vs-qled

LG’s new ‘QNED’ TVs will have up to nearly 30,000 tiny LEDs behind the screen

The Verge

https://www.theverge.com/2020/12/28/22203910/lg-qned-mini-led-4k-8k-lcd-tv-announced-ces-2021

Performance of reflective color displays in Out Of Home applications

ETulipa

Plasmonic Color Makes a Comeback

ACS Cent. Sci. 2020, 6, 332−335

https://pubs.acs.org/doi/pdf/10.1021/acscentsci.0c00259

Structural Colors for Display and E-paper Applications

L. Jay Guo

Department of Electrical Engineering and Computer Science The University of Michigan, Ann Arbor, Michigan, USA

https://deepblue.lib.umich.edu/bitstream/handle/2027.42/107993/sdtp00205.pdf;jsessionid=4ECB722ACF8896CFECA475935B750BD0?sequence=1

Stretchable and reflective displays: materials, technologies and strategies

Nano Convergence volume 6, Article number: 21 (2019)

https://nanoconvergencejournal.springeropen.com/articles/10.1186/s40580-019-0190-5

Transmissive/Reflective structural color filters: theory and applications

Journal of Nanomaterials January 2014 Article No.: 6 https://doi.org/10.1155/2014/212637

https://dl.acm.org/doi/abs/10.1155/2014/212637

https://dl.acm.org/doi/pdf/10.1155/2014/212637

Plasmonic Metasurfaces with Conjugated Polymers for Flexible Electronic Paper in Color

Kunli Xiong, Gustav Emilsson, Ali Maziz, Xinxin Yang, Lei Shao, Edwin W. H. Jager and Andreas B. Dahlin.

Reflective–emissive photoluminescent cholesteric liquid crystal display

Jang-Kyum Kim, Suk-Hwan Joo, and Jang-Kun Song

Applied OpticsVol. 52,Issue 34,pp. 8280-8286(2013)

Mobile Displays: Technology and Applications

edited by Achintya K. Bhowmik, Zili Li, Philip J. Bos

Book

Reflective cholesteric liquid crystal displays

D.-K. Yang Kent State Univ

in Mobile Displays,

Reflective and Transflective Liquid Crystal Displays

  • September 2014

DOI: 10.1002/9781118751992.ch9

  • In book: Fundamentals of Liquid Crystal Devices, Second Edition (pp.285-319)

Deng‐Ke Yang
Shin-Tson Wu

Full-color reflective display based on narrow bandwidth templated cholesteric liquid crystal film

DOI: 10.1364/OME.7.000016

https://www.researchgate.net/publication/311358302_Full-color_reflective_display_based_on_narrow_bandwidth_templated_cholesteric_liquid_crystal_film

Electrophoretic liquid crystal displays: How far are we?

Susanne Klein

HP Laboratories HPL-2013-23

How Liquid Crystal Displays Work in an eWriter

By Monica Kanojia May 04, 2012

https://www.livescience.com/20104-boogie-board-ewriter-nsf-bts.html

Dynamic plasmonic color generation enabled by functional materials

  1. Frank Neubrech
  2. Xiaoyang Duan
  3. Na Liu

Science Advances  04 Sep 2020:
Vol. 6, no. 36, eabc2709
DOI: 10.1126/sciadv.abc2709

https://advances.sciencemag.org/content/6/36/eabc2709

Reflective Liquid Crystal Displays

Shin-Tson Wu, Hughes Research Laboratories
Deng-ke Yang, Kent State University

The evolution of portable communications applications has been facilitated largely by the development of reflective LCD technology. Offering a unique insight into state-of-the art display technologies, Reflective Liquid Crystal Displays covers the basic operations principles, exemplary device structures and fundamental material properties of device components.

Featuring:

  • Direct-view, projection and micro (virtual projection) reflective displays in the context of multi-media projectors, mobile internet and personal entertainment displays.
  • Optimization of critical display attributes: fast response time, low voltage operation and wide angle viewing.
  • Description of the basic properties of liquid crystal materials and their incorporation into configurations for transmissive and reflective applications.
  • Examination of the various operations modes enabling the reader to select the appropriate display type to meet a variety of needs.
  • Overview and comparison of the complete range of reflective display technologies, and reflective LCD effects.

Product Demographics
Author:    Shin-Tson Wu, Deng-Ke Yang
Publisher:    John Wiley & Sons, Ltd
Date of Publication:    04/01/2001
ISBN Number:    0-471-49611-1
Format:    Hardback
Pages:    352

Reflective liquid crystal display with fast response time and wide viewing angle

Xiao-Qing GuaFan ChuaLi-Lan TianaRui LiaWen-Yi HouaXiang-Yu Zhoua Qiong-HuaWang

Received 29 August 2019, Revised 5 November 2019, Accepted 16 November 2019, Available online 20 November 2019.

Optics Communications. Volume 459, 15 March 2020, 124970

https://www.sciencedirect.com/science/article/abs/pii/S0030401819310466

RDot AB ElectroChromic Displays

https://rdotdisplays.com/displays

Review of nanostructure color filters Felix Gildas and Yaping Dan*

University of Michigan–Shanghai Jiao Tong University Joint Institute, Shanghai, China

J. Nanophoton. 13(2), 020901 (2019), doi: 10.1117/1.JNP.13.020901.

http://yapingd.sjtu.edu.cn/upload/editor/file/20190708/20190708084242_36263.pdf

Nanostructured Color Filters: A Review of Recent Developments

Ayesha Shaukat 1,2 , Frazer Noble and Khalid Mahmood Arif 1,*

Received: 21 June 2020; Accepted: 23 July 2020; Published: 7 August 2020

Liquid-crystal tunable color filters based on aluminum metasurfaces

Zu-Wen Xie, Jhen-Hong Yang, Vishal Vashistha, Wei Lee, and Kuo-Ping Chen

 Optics Express > Volume 25 > Issue 24 > Page 30764

Structural Colors: From Plasmonic to Carbon Nanostructures

Ting XuHaofei ShiYi‐Kuei WuAlex F. KaplanJong G. OkL. Jay Guo

First published: 20 September 2011 

Small, 7, 3128 (2011)

https://doi.org/10.1002/smll.201101068

https://www.semanticscholar.org/paper/Structural-colors%3A-from-plasmonic-to-carbon-Xu-Shi/53a8c9085eec0bf86300a1feb54004c7085b2448

A New Full Color Reflective Display Based on Cholesteric Liquid Crystals

https://www.displaydaily.com/paid-news/ldm-mdm/technology/a-new-full-color-reflective-display-based-on-cholesteric-liquid-crystals

Reflective Display Technology 

22 Dec 2017 Samsung

https://pid.samsungdisplay.com/en/learning-center/blog/reflective-display-technology

Electrochromic Displays

Kobayashi N. (2015)

In: Chen J., Cranton W., Fihn M. (eds) Handbook of Visual Display Technology. Springer, Berlin, Heidelberg.

https://doi.org/10.1007/978-3-642-35947-7_188-1

Transparent inorganic multicolour displays enabled by zinc-based electrochromic devices

Light: Science & Applicationsvolume 9, Article number: 121 (2020) 

https://www.nature.com/articles/s41377-020-00366-9

Electrochromic Device

https://www.sciencedirect.com/topics/materials-science/electrochromic-device

What is an Electrochromic Display?

Ynvisible

https://www.ynvisible.com/news-inspiration/what-is-an-electrochromic-display

Rollable and transparent subpixelated electrochromic displays using deformable nanowire electrodes with improved electrochemical and mechanical stability

Jong-WooKimDo-KyunKwonJae-MinMyoung

Department of Materials Science and Engineering, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, Seoul 03722, Republic of Korea

Received 22 November 2019, Revised 26 December 2019, Accepted 15 January 2020, Available online 18 January 2020.

https://doi.org/10.1016/j.cej.2020.124145

https://www.sciencedirect.com/science/article/abs/pii/S1385894720301364

Performance studies of electrochromic displays

Proceedings Volume 9258, Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies VII; 925833 (2015)

https://doi.org/10.1117/12.2072317

https://www.spiedigitallibrary.org/conference-proceedings-of-spie/9258/1/Performance-studies-of-electrochromic-displays/10.1117/12.2072317.short?SSO=1

Flexible and Transparent Electrochromic Displays with Simultaneously Implementable Subpixelated Ion Gel‐Based Viologens by Multiple Patterning

Jong‐Woo KimJae‐Min Myoung

First published: 04 February 2019 

https://doi.org/10.1002/adfm.201808911

https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201808911

Greyscale and Paper Electrochromic Polymer Displays by UV Patterning 

by Robert Brooke 1,2Jesper Edberg 1,2Xavier Crispin 1Magnus Berggren 1Isak Engquist 1 and Magnus P. Jonsson 1,*1

Laboratory of Organic Electronics, Department of Science and Technology, Linkoping University, SE-601 74 Norrkoping, Sweden2RISE Acreo, ICT Department, Printed Electronics, Research Institutes of Sweden, Acreo, 601 17 Norrkoping, Sweden

 Polymers201911(2), 267; https://doi.org/10.3390/polym11020267

https://www.mdpi.com/2073-4360/11/2/267

Printed Electrochromics boldly goes where no display has gone before

Ron Mertens

https://www.oled-info.com/printed-electrochromics-boldly-goes-where-no-display-has-gone

Multi-Layered Electrochromic Display

Yoshihisa Naijoh, Tohru Yashiro, Shigenobu Hirano, Yoshinori Okada, SukChan Kim, Kazuaki Tsuji, Hiroyuki Takahashi, Koh Fujimura, Hitoshi Kondoh

RICOH Company, Ltd., Research and Development Group, 16-1 Shinei-cho, Tsuzuki-ku, Yokohama-shi, Kanagawa, Japan

High Resolution Technology for Multi-Layered Electrochromic Display

Yoshinori Okada, Tohru Yashiro, Yoshihisa Naijoh, Shigenobu Hirano, SukChan Kim, Kazuaki Tsuji, Hiroyuki Takahashi, Koh Fujimura, Hitoshi Kondoh

RICOH Company, Ltd., Research and Development Group, 16-1 Shinei-cho, Tsuzuki-ku, Yokohama, Kanagawa, Japan

Flexible Electrochromic Display

Tohru Yashiro, Yoshinori Okada, Yoshihisa Naijoh, Shigenobu Hirano, Toshiya Sagisaka, Daisuke Gotoh, Mamiko Inoue, SukChan Kim, Kazuaki Tsuji, Hiroyuki Takahashi, and Koh Fujimura

RICOH Company, Ltd., Research and Development Group, 16-1 Shinei-cho, Tsuzuki-ku, Yokohama, Kanagawa, Japan

5.3: Novel Design for Color Electrochromic Display

Tohru Yashiro, Shigenobu Hirano, Yoshihisa Naijoh, Yoshinori Okada, Kazuaki Tsuji, Mikiko Abe, Akishige Murakami, Hiroyuki Takahashi, Koh Fujimura, Hitoshi Kondoh

Ricoh Company, Ltd.Research and Development Group 16-1 Shinei-cho, Tsuzuki-ku Yokohama, Kanagawa, Japan

Electrokinetic pixels with biprimary inks for color displays and color-temperature-tunable smart windows

S. MUKHERJEE,1 W. L. HSIEH,3 N. SMITH,2 M. GOULDING,2 AND J. HEIKENFELD1,*

1Department of Electrical Engineering and Computing Systems, University of Cincinnati, Cincinnati, Ohio 45221, USA 2Merck Chemicals Ltd., Chilworth Technical Centre, Southampton, Hampshire SO16 7QD, UK
3Institute of Applied Mechanics, National Taiwan University, Taipei 106, Taiwan
*Corresponding author: heikenjc@ucmail.uc.edu

Received 11 March 2015; revised 5 May 2015; accepted 11 May 2015; posted 18 May 2015 (Doc. ID 235176); published 10 June 2015

Vol. 54, No. 17 / June 10 2015 / Applied Optics

TransPrint: A Method for Fabricating Flexible Transparent Free-Form Displays


Walther Jensen,1 Ashley Colley,2 Jonna Häkkilä,2 Carlos Pinheiro,3 and Markus Löchtefeld1

1Aalborg University, 9000 Aalborg, Denmark

2University of Lapland, 96300 Rovaniemi, Finland

3Ynvisible Interactive Inc., 2820-690 Charneca da Caparica, Portugal

Advances in Human-Computer Interaction, vol. 2019, Article ID 1340182, 14 pages,2019. https://doi.org/10.1155/2019/1340182

https://www.hindawi.com/journals/ahci/2019/1340182/

IllumiPaper: Illuminated Interactive Paper

Konstantin Klamka, Raimund Dachselt

Interactive Media Lab Dresden Technische Universita ̈t Dresden, Germany {klamka, dachselt}@acm.org

Electrofluidic Imaging Films for Brighter, Faster, and Lower‐Cost e‐Paper

Matthew Hagedon Jason Heikenfeld Kenneth A. Dean Eric Kreit Kaichang Zhou John Rudolph

First published: 01 July 2013

SID

Volume44, Issue1 June 2013 Pages 111-114

https://doi.org/10.1002/j.2168-0159.2013.tb06154.x

https://onlinelibrary.wiley.com/doi/abs/10.1002/j.2168-0159.2013.tb06154.x

The Biprimary Color System for E‐Paper: Doubling Color Performance Compared to RGBW

Sayantika Mukherjee Jason Heikenfeld Nathan Smith Mark Goulding Claire Topping Sarah Norman Qin Liu Laura Kramer

Volume45, Issue1 San Diego, CA, June 1–6, 2014
June 2014 Pages 869-872. First published: 07 July 2014

https://doi.org/10.1002/j.2168-0159.2014.tb00229.x

https://onlinelibrary.wiley.com/doi/abs/10.1002/j.2168-0159.2014.tb00229.x

Fundamentals and Applications of Large Area Multi-spectral state Electrophoretic Panels for Displays and Smart Windows

PhD Thesis 2015

Sayantika Mukherjee

Printed Multi-color Devices using Oxidative Electrochromic Materials

Daisuke Goto*, Satoshi Yamamoto, Toshiya Sagisaka, Masato Shinoda, Fuminari Kaneko, Keiichiro Yutani, Keigo Takauji, Yoshinori Okada, and Tohru Yashiro

Ricoh Institute of Future Technology, Ricoh Co., Ltd.
16-1 Shinei-cho, Tsuduki-ku, Yokohama, Kanagawa 224-0035, Japan

*daisuke.dg.gotoh@nts.ricoh.co.jp

Journal of Photopolymer Science and Technology

Volume 30, Number 4 (2017) 489-493 

https://www.jstage.jst.go.jp/article/photopolymer/30/4/30_489/_pdf

Novel organic multi-color electrochromic device for e-paper application

Authors: Kobayashi, Norihisa; Yukikawa, Masahiro; Liang, Zhuang; Nakamura, Kazuki
Source: NIP & Digital Fabrication Conference, Volume 2017, Number 1, November 2017, pp. 111-114(4)
Publisher: Society for Imaging Science and Technology

https://www.ingentaconnect.com/contentone/ist/nipdf/2017/00002017/00000001/art00026

Scalable electrochromic nanopixels using plasmonics

  1. Jialong Peng
  2. Hyeon-Ho Jeong
  3. Qianqi Lin
  4. Sean Cormier1
  5. Hsin-Ling Liang2
  6. Michael F. L. De Volder2
  7. Silvia Vignolini3 and 
  8. Jeremy J. Baumberg1,
  1. 1NanoPhotonics Centre, Cavendish Laboratory, University of Cambridge, Cambridge CB3 0HE, UK.
  2. 2NanoManufacturing Group, Department of Engineering, University of Cambridge, Cambridge CB3 0FS, UK.
  3. 3Bio-inspired Photonics Group, Department of Chemistry, University of Cambridge, Cambridge CB2 1EW, UK.

Science Advances  10 May 2019:
Vol. 5, no. 5, eaaw2205
DOI: 10.1126/sciadv.aaw2205

https://advances.sciencemag.org/content/5/5/eaaw2205

Electrochromic display

Innoscentia adopts Ynvisible displays for dynamic food labels

https://www.e-ink-info.com/tags/electrochromic-display

Low energy switching driver for printed electrochromic displays

Ciprian Ionescu, Robert Alexandru Dobre

Proceedings Volume 10010, Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies VIII; 100100I (2016) https://doi.org/10.1117/12.2246104

Event: Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies 2016, 2016, Constanta, Romania

https://www.spiedigitallibrary.org/conference-proceedings-of-spie/10010/1/Low-energy-switching-driver-for-printed-electrochromic-displays/10.1117/12.2246104.short

Electrochromic materials and devices: present and future 

Prakash R. Somani a,∗, S. Radhakrishnan b

Photonics and Advanced Materials Laboratory, Centre for Materials for Electronics Technology (C-MET), Panchawati, Off Pashan Road, Pune 411008, India
National Chemical Laboratory (NCL), Polymer Science and Chemical Engineering, Pune 411008, India

Received 17 May 2001; received in revised form 10 September 2001; accepted 26 September 2001

Materials Chemistry and Physics 77 (2002) 117–133

A high speed electrically switching reflective structural color display with large color gamut

Wenqiang Wang,aZhiqiang Guan *a  and  Hongxing Xu*ab

Nanoscale, 2021,13, 1164-1171 

https://pubs.rsc.org/en/content/articlelanding/2021/nr/d0nr07347d/unauth#!divAbstract

Mechanochromism in Structurally Colored Polymeric Materials

Jess M. Clough,* Christoph Weder, and Stephen Schrettl

Macromol. Rapid Commun. 202142, 2000528

https://onlinelibrary.wiley.com/doi/full/10.1002/marc.202000528

Transparent inorganic multicolour displays enabled by zinc-based electrochromic devices

by Light Publishing Center, Changchun Institute of Optics, Fine Mechanics And Physics, Chinese Academy

https://phys.org/news/2020-07-transparent-inorganic-multicolour-enabled-zinc-based.html

Transparent inorganic multicolour displays enabled by zinc-based electrochromic devices

Light: Science & Applications volume 9, Article number: 121 (2020)

https://www.nature.com/articles/s41377-020-00366-9

The Rdot Display

https://rdotdisplays.com/displays#technology-overview

Flexible displays for smart clothing: Part II— Electrochromic displays

Ludivine MeunierFern M. Kelly,  V. Koncar

Published 2011

https://www.semanticscholar.org/paper/Flexible-displays-for-smart-clothing%3A-Part-II—-Meunier-Kelly/416ae224096d852d4e804f023344cfd77f8a0955

Electrochromic displays

The new black

Nature Materials volume 7, pages766–767(2008)

https://www.nature.com/articles/nmat2282

Intrinsically stretchable polymer based electrochromic devices for soft electronic displays

Preston, Garth Eden Claire

2020 PhD Thesis UBC, Canada

https://open.library.ubc.ca/cIRcle/collections/ubctheses/24/items/1.0394053

TiO2 Nanostructured Films for Electrochromic Paper Based-Devices

by Daniela Nunes , Tomas Freire, Andrea Barranger 1, João Vieira 1, Mariana Matias 1, Sonia Pereira 1, Ana Pimentel 1, Neusmar J. A. Cordeiro 1,2, Elvira Fortunato 1 and Rodrigo Martins 1,

Appl. Sci. 2020, 10(4), 1200; https://doi.org/10.3390/app10041200

https://www.mdpi.com/2076-3417/10/4/1200/htm

Printable All‐Organic Electrochromic Active‐Matrix Displays

P. Andersson R. Forchheimer P. Tehrani M. Berggren
First published: 31 August 2007

https://doi.org/10.1002/adfm.200601241

Advanced Functional Materials Volume17, Issue16
November, 2007
Pages 3074-3082

https://onlinelibrary.wiley.com/doi/epdf/10.1002/adfm.200601241

Development and Manufacture of Polymer‐Based Electrochromic Devices

Jacob Jensen Markus Hösel Aubrey L. Dyer Frederik C. Krebs

Advanced Functional Materials Volume25, Issue14
April 8, 2015
Pages 2073-2090

First published: 26 February 2015 https://doi.org/10.1002/adfm.201403765

https://onlinelibrary.wiley.com/doi/abs/10.1002/adfm.201403765

In-Glass Display Applications

Lumineq

Greyscale and Paper Electrochromic Polymer Displays by UV Patterning 

by Robert Brooke 1,2Jesper Edberg 1,2Xavier Crispin 1Magnus Berggren 1Isak Engquist 1 and Magnus P. Jonsson 1,*1

Laboratory of Organic Electronics, Department of Science and Technology, Linkoping University, SE-601 74 Norrkoping, Sweden2

RISE Acreo, ICT Department, Printed Electronics, Research Institutes of Sweden, Acreo, 601 17 Norrkoping, Sweden

 

Polymers 201911(2), 267; https://doi.org/10.3390/polym11020267

https://www.mdpi.com/2073-4360/11/2/267

Ynvisible

https://www.ynvisible.com/products

Novel Color-Sequential Transflective Liquid Crystal Displays 

Ju-Hyun Lee, Xinyu Zhu, and Shin-Tson Wu, Fellow, IEEE

JOURNAL OF DISPLAY TECHNOLOGY, VOL. 3, NO. 1, MARCH 2007

Control of Reflectivity and Bistability in Displays Using Cholesteric Liquid-Crystals

Deng-Ke Yang

Kent State University – Kent Campus

John L. West

Kent State University – Kent Campus

Liang-Chy Chien
Kent State University – Kent Campus, lchien@kent.edu

J. William Doane

Kent State University – Kent Campus

1994

Journal of Applied Physics 76(2), 1331-1333. doi: 10.1063/1.358518

A Polymer-Stabilized Single-Layer Color Cholesteric Liquid Crystal Display with Anisotropic Reflection. 

Lu, Shin-Ying and Chien, Liang-Chy (2007).

Applied Physics Letters 91(13). doi: 10.1063/1.2790499

Electrofluidic Imaging Films for Brighter, Faster, and Lower‐Cost e‐Paper

Matthew HagedonJason HeikenfeldKenneth A. DeanEric KreitKaichang ZhouJohn Rudolph

First published: 01 July 2013 

https://doi.org/10.1002/j.2168-0159.2013.tb06154.x

SID Digest Volume44, Issue1
June 2013
Pages 111-114

https://onlinelibrary.wiley.com/doi/abs/10.1002/j.2168-0159.2013.tb06154.x

POLYMER STABILIZED BLACK-WHITE CHOLESTERIC REFLECTIVE DISPLAY

Inventors:Deng-KeYang, Hudson; Ruiqing Ma, Kent, both of Ohio

Asigne:Kent State University, Kent, Ohio

Patent Number: 5,847,798

Date of Patent: Dec.8,1998

BISTABLE POLYMER DISPERSED CHOLESTERIC LIQUID CRYSTAL DISPLAYS

Inventors:Deng-KeYang, Stow,Ohio;

Zhijian Lu,Yorktown Heights, N.Y.;

J.William Doane, Kent, Ohio

Assignee: Kent State University, Kent, Ohio

Patent Number: 6,061,107

Date of Patent: May9,2000

HOLOGRAPHICALLY FORMED REFLECTIVE DISPLAY, LIQUID CRYSTAL DISPLAY AND PROJECTION SYSTEM AND METHODS OF FORMING THE SAME

Inventors: Louis D.Silverstein, Scotsdale, Ariz.,

Thomas G. Fiske, Campbell, Calif.;

Greg P. Crawford, Providence, R.I.

Assignee: Xerox Corporation, Stamford, Conn.

Patent Number: 6,133,971

Date of Patent: Oct.17,2000

Japan Display shows low-power reflective LCD that does color, video

https://www.engadget.com/2012-11-05-japan-display-shows-low-power-reflective-lcd.html

Japan Display Introduces Paper-like Color Reflective LCD

https://www.cdrinfo.com/d7/content/japan-display-introduces-paper-color-reflective-lcd

https://www.hardwarezone.com.sg/tech-news-japan-display-showcases-7-inch-paper-reflective-lcd-panel

Overview on reflective liquid crystal displays using one polarizer

Shin-Tson Wu

Proceedings Volume 3421, Display Technologies II; (1998) https://doi.org/10.1117/12.311049
Event: Asia Pacific Symposium on Optoelectronics ’98, 1998, Taipei, Taiwan

https://www.spiedigitallibrary.org/conference-proceedings-of-spie/3421/0000/Overview-on-reflective-liquid-crystal-displays-using-one-polarizer/10.1117/12.311049.short?SSO=1

Reflective Liquid-Crystal Displays

Published online by Cambridge University Press:  31 January 2011

Tatsuo Uchida  and Takahiro Ishinabe

MRS Bulletin , Volume 27 , Issue 11: Advanced Flat-Panel Displays and Materials , November 2002 , pp. 876 – 879

DOI: https://doi.org/10.1557/mrs2002.276

https://www.cambridge.org/core/journals/mrs-bulletin/article/abs/reflective-liquidcrystal-displays/61677377AAC957316F367A6B4612E0A1

Reflective Liquid Crystal Displays

Shin-Tson Wu, Hughes Research Laboratories
Deng-ke Yang, Kent State University

The evolution of portable communications applications has been facilitated largely by the development of reflective LCD technology. Offering a unique insight into state-of-the art display technologies, Reflective Liquid Crystal Displays covers the basic operations principles, exemplary device structures and fundamental material properties of device components.

Display engineers, scientists and technicians active in the field will welcome this unique resource, as will developers of a wide range of systems and applications. Graduate students and researchers will appreciated the introduction and technical insight into this exciting technology.

Featuring:

  • Direct-view, projection and micro (virtual projection) reflective displays in the context of multi-media projectors, mobile internet and personal entertainment displays.
  • Optimization of critical display attributes: fast response time, low voltage operation and wide angle viewing.
  • Description of the basic properties of liquid crystal materials and their incorporation into configurations for transmissive and reflective applications.
  • Examination of the various operations modes enabling the reader to select the appropriate display type to meet a variety of needs.
  • Overview and comparison of the complete range of reflective display technologies, and reflective LCD effects.


Author:    Shin-Tson Wu, Deng-Ke Yang
Publisher:    John Wiley & Sons, Ltd
Date of Publication:    04/01/2001
ISBN Number:    0-471-49611-1
Format:    Hardback
Pages:    352

https://www.sid.org/Publications/Bookstore/tabid/836/c/book/p/reflective-liquid-crystal-displays/Default.aspx

Reflective liquid crystal display with fast response time and wide viewing angle

Xiao-QingGuaFanChuaLi-LanTianaRuiLiaWen-YiHouaXiang-YuZhouaQiong-HuaWangb

Optics Communications
Volume 459, 15 March 2020, 124970

https://www.sciencedirect.com/science/article/abs/pii/S0030401819310466

TRANSPARENT REFLECTIVE LIQUID CRYSTAL DISPLAY

Inventors:Jong Weon Moon, Seoul (KR);Yong Beom Kim, Seoul (KR)

US202/089623A1

July 2002

What LCD Modes Mean: Reflective, Transmissive, Transflective

March 14, 2017

Reflective Liquid Crystal Displays: The Next Major Paradigm Shift in Display Technology

Gregory P. Crawford Brown University, Providence, RI

Power generating reflective-type liquid crystal displays using a reflective polariser and a polymer solar cell. 

Ho Huh, Y. and Park, B.

Sci. Rep. 5, 11558; doi: 10.1038/srep11558 (2015).

https://www.nature.com/articles/srep11558

Achromatic Dye-type Polarizer for Paper White Reflective Liquid Crystal Displays

ITE Trans. on MTA Vol. 6, No. 4, pp. 262-268 (2018)

Noriaki Mochizuki†1, Takahiro Ishinabe†2 (member), Daichi Fujiwara†3, Daisuke Nakamura†3, Norio Koma†3, Hideo Fujikake†2 (member)

https://www.jstage.jst.go.jp/article/mta/6/4/6_262/_article/-char/en

Types of LCD Displays

https://www.eeeguide.com/types-of-lcd-displays/

Reflective LCD Display:

https://www.eeeguide.com/reflective-lcd-display/

Color OLED/reflective LCD hybrid display can be easily seen in full sunlight

Display demoed at SID 2016 is suitable in size for a cell phone.

Jun 27th, 2016

https://www.laserfocusworld.com/detectors-imaging/article/16558979/color-oledreflective-lcd-hybrid-display-can-be-easily-seen-in-full-sunlight

Reflective LCD Display

Sun Vision Display

https://www.sunvisiondisplay.com/technology

FLEx Lighting Sets Out to Transform Reflective LCD

https://www.displaysupplychain.com/blog/flex-lighting-sets-out-to-transform-reflective-lcd

Reflective liquid crystal display using cholesteric polymers

US-0883021 (2001-06-15)

JDI Reflective Display is For Digital Signage

https://www.displaydaily.com/paid-news/ldm/ldm-event-reports/ldm-company-event-reports/jdi-shows-reflective-display-for-digital-signage

Japan Display Inc. to start mass production of ultra-low power consumption Memory-In-Pixel reflective-type LCD module

Posted By itersnews On January 13, 2014 

http://itersnews.com/?p=64732

MONOCHROME AND COLOR MEMORY-IN-PIXEL DISPLAYS (MIP)

https://www.data-modul.com/en/displays/mip-displays.html

Reflective liquid-crystal displays with asymmetric incident and exit angles

Zhibing Ge, Thomas X. Wu, Xinyu Zhu, and Shin-Tson Wu

Journal of the Optical Society of America A Vol. 22, Issue 5, pp. 966-977 (2005) •https://doi.org/10.1364/JOSAA.22.000966

https://www.researchgate.net/publication/7842095_Reflective_liquid-crystal_displays_with_asymmetric_incident_and_exit_angles

Analyses and Improvements of Whiteness of Reflective Liquid Crystal Displays

Yi-Pai Huang1, Liang-San Chu1 and Han-Ping D. Shieh1

Published 9 September 2004 • Copyright (c) 2004 The Japan Society of Applied Physics
Japanese Journal of Applied PhysicsVolume 43Number 9R

Citation Yi-Pai Huang et al 2004 Jpn. J. Appl. Phys. 43 6162

Reflective liquid-crystal display using an in-plane-switching super-twisted nematic cell

Y. SunHong-mei Ma, +1 author S. Wu

Published 2002

Journal of Applied Physics

https://www.semanticscholar.org/paper/Reflective-liquid-crystal-display-using-an-nematic-Sun-Ma/51d4591feb27bad6fe47d5ceb7872a0de2c4b79d

Color Reflective Display Technology

Ricoh

https://www.ricoh.com/technology/tech/031_epaper

Liquid Crystal Display (LCD) Modes

Hitachi

http://www.koe.j-display.com/upload/file/AN-005_Display_Modes.pdf

Review of Display Technologies Focusing on Power Consumption

María Rodríguez Fernández 1,†, Eduardo Zalama Casanova 2,* and Ignacio González Alonso 3,†

Sustainability 2015, 7, 10854-10875; doi:10.3390/su70810854

Fujitsu Dramatically Enhances Color Electronic Paper Functionality

https://www.fujitsu.com/global/about/resources/news/press-releases/2010/0507-01.html

https://en.wikipedia.org/wiki/FLEPia

What are ZBD LCDs?

December 19, 2019

New Vision Display Acquires ZBD LCD Technology and Malvern, UK Facility

https://www.displaydaily.com/article/press-releases/new-vision-display-acquires-zbd-lcd-technology-and-malvern-uk-facility

Large Area, High Resolution Portable ZBD Display

DOI: 10.1889/1.1830238

https://www.researchgate.net/publication/250999021_51_Large_Area_High_Resolution_Portable_ZBD_Display

Nemoptic OLED/BiNem combo display gets video demo

Chris Davies – Oct 11, 2010, 4:12am CDT

https://www.slashgear.com/nemoptic-oledbinem-combo-display-gets-video-demo-11107018/

https://www.oled-info.com/nemoptic-unvies-oled-coupled-bistable-nematic-lcd-display

https://www.sii.co.jp/en/news/release/2008/12/04/10150/

Bistable Reflective LCDs

https://focuslcds.com/journals/bistable-display-new-custom-lcd-technology-qa/

Bistable Liquid Crystal Displays

  • January 2016
  • Cliff Jones

DOI: 10.1007/978-3-319-14346-0_92

https://www.researchgate.net/publication/310481389_Bistable_Liquid_Crystal_Displays

The Zenithal Bistable Display: From concept to consumer

DOI: 10.1889/1.2835021

https://www.researchgate.net/publication/245414219_The_Zenithal_Bistable_Display_From_concept_to_consumer

A Nematic-Cholesteric Bistable Liquid Crystal Display For Projectors

A. MochizukiM. IwasakiY. YamagishiH. GondoH. Yamaguchi

Global Bistable LCD Market: Industry Analysis 2013-2018 and Opportunity Assessment 2018-2023

https://industryresearchcity.wordpress.com/2019/05/22/global-bistable-lcd-market-industry-analysis-2013-2018-and-opportunity-assessment-2018-2023/

CLEARink Displays

https://www.clearinkdisplays.com

Recent Trend of Display Devices

Fumiaki Funada*1 Masaya Hijikigawa*2

1997

Electrofluidic Displays: Multi-stability and Display Technology Progress

Kenneth A. Dean, Kaichang Zhou, Steve Smith, Brian Brollier, Hari Atkuri and John Rudolph
Gamma Dynamics, Cincinnati, OH 45229, U.S.A.

Shu Yang, Stephanie Chevalliot, Eric Kreit, and Jason Heikenfeld

Novel Devices Lab, University of Cincinnati, Cincinnati, OH 45221, U.S.A.

Photonic-crystal full-colour displays

́
ANDRE C. ARSENAULT1,2*, DANIEL P. PUZZO1,2, IAN MANNERS3* AND GEOFFREY A. OZIN1*

1Department of Chemistry, University of Toronto, 80 St George Street, Toronto M5S 3H6, Canada 2Opalux Incorporated, 80 St George Street, Toronto M5S 3H6, Canada
3School of Chemistry, University of Bristol, Cantock’s Close, Bristol BS8 1TS, UK
*e-mail: andre.arsenault@opalux.com; Ian.Manners@bristol.ac.uk; gozin@chem.utoronto.ca

nature photonics | VOL 1 | AUGUST 2007 | www.nature.com/naturephotonics

P-Ink displays: Flexible, low power, reflective color

Andre C ArsenaultHai WangEric HendersonFergal KerinsUlrich KampLeonardo Da Silva BonifacioPak Hin LawGeoffrey A. Ozin

Proceedings Volume 8613, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics VI; 86130R (2013) 

https://doi.org/10.1117/12.2006468
Event: SPIE MOEMS-MEMS, 2013, San Francisco, California, United States

https://www.spiedigitallibrary.org/conference-proceedings-of-spie/8613/86130R/P-Ink-displays-Flexible-low-power-reflective-color/10.1117/12.2006468.short

P-Ink and Elast-Ink from lab to market

Geoffrey A.OzinaAndre C.Arsenaultba

Center for Inorganic and Polymeric Nanomaterials, Chemistry Department, University of Toronto, 80 St George Street, Toronto, Ontario, Canada M5S3H6b

Opalux Incorporated, 80 St George Street, Toronto, Ontario, Canada M5S 3H6

Materials Today Volume 11, Issues 7–8, July–August 2008, Pages 44-51

https://www.sciencedirect.com/science/article/pii/S1369702108701482

A Polychromic, Fast Response Metallopolymer Gel Photonic Crystal with Solvent and Redox Tunability: A Step Towards Photonic Ink (P‐Ink)

A.C. Arsenault. H. Míguez V. Kitaev G.A. Ozin I. Manners

First published: 20 March 2003 

https://doi.org/10.1002/adma.200390116

https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.200390116

Nanobrick

http://www.nanobrick.co.kr/en/home_en

Opalux

ESKIN Displays

http://www.eskindisplays.com

Structural Colors: From Plasmonic to Carbon Nanostructures

Ting Xu, Haofei Shi, Yi-Kuei Wu, Alex F. Kaplan, Jong G. Ok, and L. Jay Guo

http://oknano.org/doc/paper/international/012_2011_Small_structuralcolors_review.pdf

Liquid-crystal tunable color filters based on aluminum metasurfaces

ZU-WEN XIE,1 JHEN-HONG YANG,2 VISHAL VASHISTHA,3 WEI LEE,4 AND KUO-PING CHEN4,*

1Institute of Lighting and Energy Photonics, National Chiao Tung University, Guiren Dist, Tainan 71150, Taiwan
2Institute of Photonic System, National Chiao Tung University, Guiren Dist., Tainan 711, Taiwan 3Faculty of Physics, Adam Mickiewicz University in Poznan, Poland

4Institute of Imaging and Biomedical Photonics, National Chiao Tung University, Guiren Dist., Tainan 71150, Taiwan

Full-Color Realization of Micro-LED Displays 

Yifan Wu, Jianshe Ma, Ping Su * , Lijun Zhang and Bizhong Xia

Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen 518055, China; wuyf19@mails.tsinghua.edu.cn (Y.W.); ma.jianshe@sz.tsinghua.edu.cn (J.M.); zhanglj18@mails.tsinghua.edu.cn (L.Z.); xiabz@sz.tsinghua.edu.cn (B.X.)
Correspondence: su.ping@sz.tsinghua.edu.cn

Nanomaterials 202010, 2482; doi:10.3390/nano10122482

Plasmonic Color Makes a Comeback

Rachel Brazil

ACS Central Science 2020 6 (3), 332-335 DOI: 10.1021/acscentsci.0c00259

https://pubs.acs.org/doi/pdf/10.1021/acscentsci.0c00259

Plasmonic Metasurfaces with Conjugated Polymers for Flexible Electronic Paper in Color

Kunli Xiong, Gustav Emilsson, Ali Maziz, Xinxin Yang, Lei Shao, Edwin Jager and Andreas B. Dahlin

Advanced Materials, 2016. 28(45), pp.9956-9960. http://dx.doi.org/10.1002/adma.201603358

Dynamic plasmonic color generation enabled by functional materials


Frank Neubrech1,2, Xiaoyang Duan1,2, Na Liu3,4*

Neubrech et al., Sci. Adv. 2020; : eabc2709 4 September 2020

Scalable electrochromic nanopixels using plasmonics

Jialong Peng1*, Hyeon-Ho Jeong1*, Qianqi Lin1, Sean Cormier1, Hsin-Ling Liang2, Michael F. L. De Volder2, Silvia Vignolini3, Jeremy J. Baumberg1†

Peng et al., Sci. Adv. 2019;5:eaaw2205 10 May 2019

Actively addressed single pixel full-colour plasmonic display


Daniel Franklin1,2, Russell Frank2, Shin-Tson Wu3 & Debashis Chanda1,2,3

2016

NATURE COMMUNICATIONS | 8:15209 | DOI: 10.1038/ncomms15209 | http://www.nature.com/naturecommunications

https://www.nature.com/articles/ncomms15209.pdf?origin=ppub

Super Ultra-High Resolution Liquid-Crystal-Display Using Perovskite Quantum-Dot Functional Color-Filters

Scientific Reports volume 8, Article number: 12881 (2018)

https://www.nature.com/articles/s41598-018-30742-w

Micro-light-emitting diodes with quantum dots in display technology

Light: Science & Applicationsvolume 9, Article number: 83 (2020)

https://www.nature.com/articles/s41377-020-0268-1

Plasmonic Color Filters for CMOS Image Sensor Applications

Sozo Yokogawa,†,‡,§ Stanley P. Burgos,†,§ and Harry A. Atwater*,†
†Thomas J. Watson Laboratories of Applied Physics, California Institute of Technology, Pasadena, California 91125, United States

‡Sony Corporation, Atsugi Tec. 4-14-1 Asahi-cho, Atsugi, Kanagawa, 243-0014, Japan

dx.doi.org/10.1021/nl302110z | Nano Lett.

Review of nanostructure color filters 

Felix Gildas and Yaping Dan*

University of Michigan–Shanghai Jiao Tong University Joint Institute, Shanghai, China

Journal of Nanophotonics 020901-1 Apr–Jun 2019 • Vol. 13(2)

http://yapingd.sjtu.edu.cn/upload/editor/file/20190708/20190708084242_36263.pdf

Electroactive Inverse Opal: A Single Material for All Colors

Daniel P. PuzzoAndre C. ArsenaultIan MannersGeoffrey A. Ozin

First published: 13 January 2009 

https://doi.org/10.1002/anie.200804391

Angewandte Volume48, Issue5 January 19, 2009 Pages 943-947

https://onlinelibrary.wiley.com/doi/epdf/10.1002/anie.200804391

Electrically tunable block copolymer photonic crystals with a full color display

Yijie Lu,a Hongwei Xia,a Guangzhao Zhang*a and Chi Wuab

Received 23rd March 2009, Accepted 3rd June 2009
First published as an Advance Article on the web 30th June 2009 DOI: 10.1039/b905760a

J. Mater. Chem., 2009, 19, 5952–5955

DYNAMICALLY TUNABLE PLASMONIC STRUCTURAL COLOR

by

DANIEL FRANKLIN
B.S. Missouri University of Science and Technology, 2011

A dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy
in the Department of Physics
in the College of Sciences
at the University of Central Florida
Orlando, Florida

Spring Term 2018

Major Professor: Debashis Chanda

http://etd.fcla.edu/CF/CFE0007001/Franklin_Thesis.pdf

Progress in polydopamine-based melanin mimetic materials for structural color generation

Michinari Kohri

Department of Applied Chemistry and Biotechnology, Graduate School of Engineering, Chiba University, Chiba, Japan

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS 2021, VOL. 21, NO. 1, 833–848 https://doi.org/10.1080/14686996.2020.1852057

https://pubmed.ncbi.nlm.nih.gov/33536837/

Photoresponsive Structural Color in Liquid Crystalline Materials

Michael E. McConneyMariacristina RumiNicholas P. GodmanUrice N. TohghaTimothy J. Bunning

First published: 24 May 2019 https://doi.org/10.1002/adom.201900429

Adv Optical Materials Volume7, Issue16
Special Issue: Light‐Responsive Smart Soft Matter Technologies
August 19, 2019
1900429

https://onlinelibrary.wiley.com/doi/abs/10.1002/adom.201900429

Liquid-crystal materials find a new order in biomedical applications

Scott J Woltman 1Gregory D JayGregory P Crawford

Nat Mater
. 2007 Dec;6(12):929-38. doi: 10.1038/nmat2010. Epub 2007 Nov 18.

https://pubmed.ncbi.nlm.nih.gov/18026108/

Color Science and Technology in LCD and LED Displays

Color Science and Technology in LCD and LED Displays

Key Terms

  • Liquid Crystals Display (LCD)
  • Light Emitting Diodes (LED)
  • Organic LED (OLED)
  • Active Matrix (AM)
  • Active Matrix OLED (AMOLED)
  • Quantum light-emitting diode (QLED)
  • Quantum Dot LED
  • Quantum dots nanorod LED (QNED)
  • Mini LED
  • Micro LED
  • Color Filters (CFA)
  • Backlighting
  • Liquid Crystals
  • Light Polarization
  • Pixels
  • Sub-Pixels
  • RGB (Red Green Blue)
  • White Light
  • Blue LEDs
  • Flat Panel Display
  • CRT (Cathode Ray Tube)
  • Phosphores
  • Pigments
  • Thin Film Transistors (TFT)
  • Active Matrix TFT
  • Twisted Nematic (TN)
  • In Panel Switching displays (IPS Panels)
  • Vertical Alignment Panels (VA Panels)
  • Advanced Fringe Field Switching (AFFS)
  • AM-LCD
  • Plasma based Displays
  • CCFL Fluorescent Lamps
  • Flexible Displays
  • FPD Flat Panel Display
  • QD-OLED
  • QD-LCD
  • White LEDs
  • RGB LED Lighting
  • White LED Lighting
  • QDEF Quantum Dot Enhanced Film
  • LCM LC Module
  • QD-CF QD Color Filter
  • QD-LED based on Electroluminescence
  • miniLED Backlit LCD
  • Mini/Micro LED Emissive Displays
  • Linear Polarizer in LCD
  • Circular Polarizer in OLED
  • Perovskite LEDs
  • GB-R LED Green Blue LED + Red Phosphor
  • RB – G LED Red Blue LED + Green Phosphor
  • WCG-CCFL
  • Color Resist
  • Photo Mask
  • Optical Film
  • Neo QLED (mini LED)
  • HDR and Rec.2020 compliant displays
  • Adobe RGB Color Space
  • Rec 709 Color Space
  • DCI P3 Color Space
  • Rec 2020 Color Space
  • Color Gamut
  • Contrast Ratio
  • Brightness
  • Luminescence
  • High Dynamic Range HDR
  • Color Volume
  • Chromaticity
  • 1pc-WLED Phosphor Converted White LED
  • 2pc-WLED Phosphor Converted White LED
  • Color Crosstalk
  • Blue LED-pumped red and green QDs backlight
  • Color Converted Film CCF
  • Luminance
  • GaN – Gallium Nitride
  • lnGaN
  • Colloidal Semiconductor QDs
  • Semiconductor nanocrystal quantum-dot-integrated white- light-emitting diodes (QD-WLEDs)
  • (Low Temperature PolySilicon LCD) LTPS LCD
  • Poly-silicon (poly-Si)
  • Amorphous silicon (a-Si)
  • Organic–inorganic perovskite (OIP)
  • Photo Resist

LCD (Liquid Crystal Display)

Definition

LCD (Liquid Crystal Display) is a type of flat panel display which uses liquid crystals in its primary form of operation. LEDs have a large and varying set of use cases for consumers and businesses, as they can be commonly found in smartphones, televisions, computer monitors and instrument panels.

LCDs were a big leap in terms of the technology they replaced, which include light-emitting diode (LED) and gas-plasma displays. LCDs allowed displays to be much thinner than cathode ray tube (CRT) technology. LCDs consume much less power than LED and gas-display displays because they work on the principle of blocking light rather than emitting it. Where an LED emits light, the liquid crystals in an LCD produces an image using a backlight.

As LCDs have replaced older display technologies, LCDs have begun being replaced by new display technologies such as OLEDs.

How LCDs work

A display is made up of millions of pixels. The quality of a display commonly refers to the number of pixels; for example, a 4K display is made up of 3840 x2160 or 4096×2160 pixels. A pixel is made up of three subpixels; a red, blue and green—commonly called RGB. When the subpixels in a pixel change color combinations, a different color can be produced. With all the pixels on a display working together, the display can make millions of different colors. When the pixels are rapidly switched on and off, a picture is created.

The way a pixel is controlled is different in each type of display; CRT, LED, LCD and newer types of displays all control pixels differently. In short, LCDs are lit by a backlight, and pixels are switched on and off electronically while using liquid crystals to rotate polarized light. A polarizing glass filter is placed in front and behind all the pixels, the front filter is placed at 90 degrees. In between both filters are the liquid crystals, which can be electronically switched on and off.

 LCDs are made with either a passive matrix or an active matrix display grid. The active matrix LCD is also known as a thin film transistor (TFT) display. The passive matrix LCD has a grid of conductors with pixels located at each intersection in the grid. A current is sent across two conductors on the grid to control the light for any pixel. An active matrix has a transistor located at each pixel intersection, requiring less current to control the luminance of a pixel. For this reason, the current in an active matrix display can be switched on and off more frequently, improving the screen refresh time.

Some passive matrix LCD’s have dual scanning, meaning that they scan the grid twice with current in the same time that it took for one scan in the original technology. However, active matrix is still a superior technology out of the two.

Types of LCDs

Types of LCDs include:

  • Twisted Nematic (TN)- which are inexpensive while having high response times. However, TN displays have low contrast ratios, viewing angles and color contrasts.
  • In Panel Switching displays (IPS Panels)- which boast much better contrast ratios, viewing angles and color contrast when compared to TN LCDs.
  • Vertical Alignment Panels (VA Panels)- which are seen as a medium quality between TN and IPS displays.
  • Advanced Fringe Field Switching (AFFS)- which is a top performer compared IPS displays in color reproduction range.

LCD vs OLED vs QLED

LCDs are now being outpaced by other display technologies, but are not completely left in the past. Steadily, LCDs have been being replaced by OLEDs, or organic light-emitting diodes.

 OLEDs use a single glass or plastic panels, compared to LCDs which use two. Because an OLED does not need a backlight like an LCD, OLED devices such as televisions are typically much thinner, and have much deeper blacks, as each pixel in an OLED display is individually lit. If the display is mostly black in an LCD screen, but only a small portion needs to be lit, the whole back panel is still lit, leading to light leakage on the front of the display. An OLED screen avoids this, along with having better contrast and viewing angles and less power consumption. With a plastic panel, an OLED display can be bent and folded over itself and still operate. This can be seen in smartphones, such as the controversial Galaxy Fold; or in the iPhone X, which will bend the bottom of the display over itself so the display’s ribbon cable can reach in towards the phone, eliminating the need for a bottom bezel.

However, OLED displays tend to be more expensive and can suffer from burn-in, as plasma-based displays do.

QLED stands for quantum light-emitting diode and quantum dot LED. QLED displays were developed by Samsung and can be found in newer televisions. QLEDs work most similarly to LCDs, and can still be considered as a type of LCD. QLEDs add a layer of quantum dot film to an LCD, which increases the color and brightness dramatically compared to other LCDs. The quantum dot film is made up of small crystal semi-conductor particles. The crystal semi-conductor particles can be controlled for their color output. 

When deciding between a QLED and an OLED display, QLEDs have much more brightness and aren’t affected by burn-in. However, OLED displays still have a better contrast ratio and deeper blacks than QLEDs.

This was last updated in September 2019

Source: https://www.thoughtco.com/liquid-crystal-display-history-lcd-1992078

The History of Liquid Crystal Display

By Mary Bellis Updated March 02, 2019

hudiemm/Getty Images

An LCD or liquid crystal display is a type of flat panel display commonly used in digital devices, for example, digital clocks, appliance displays, and portable computers.

How an LCD Works 

Liquid crystals are liquid chemicals whose molecules can be aligned precisely when subjected to electrical fields, much in the way metal shavings line up in the field of a magnet. When properly aligned, the liquid crystals allow light to pass through.

A simple monochrome LCD display has two sheets of polarizing material with a liquid crystal solution sandwiched between them. Electricity is applied to the solution and causes the crystals to align in patterns. Each crystal, therefore, is either opaque or transparent, forming the numbers or text that we can read. 

History of Liquid Crystal Displays 

In 1888, liquid crystals were first discovered in cholesterol extracted from carrots by Austrian botanist and chemist, Friedrich Reinitzer.

In 1962, RCA researcher Richard Williams generated stripe patterns in a thin layer of liquid crystal material by the application of a voltage. This effect is based on an electrohydrodynamic instability forming what is now called “Williams domains” inside the liquid crystal.

According to the IEEE, “Between 1964 and 1968, at the RCA David Sarnoff Research Center in Princeton, New Jersey, a team of engineers and scientists led by George Heilmeier with Louis Zanoni and Lucian Barton, devised a method for electronic control of light reflected from liquid crystals and demonstrated the first liquid crystal display. Their work launched a global industry that now produces millions of LCDs.”

Heilmeier’s liquid crystal displays used what he called DSM or dynamic scattering method, wherein an electrical charge is applied which rearranges the molecules so that they scatter light.

The DSM design worked poorly and proved to be too power hungry and was replaced by an improved version, which used the twisted nematic field effect of liquid crystals invented by James Fergason in 1969.

James Fergason 

Inventor James Fergason holds some of the fundamental patents in liquid crystal displays filed in the early 1970s, including key US patent number 3,731,986 for “Display Devices Utilizing Liquid Crystal Light Modulation”

In 1972, the International Liquid Crystal Company (ILIXCO) owned by James Fergason produced the first modern LCD watch based on James Fergason’s patent.

Liquid Crystals in a Display

Source: Japan Display Inc.

LCD Basics

Liquid crystal

Liquid crystal refers to the intermediate status of a substance between solid (crystal) and liquid. When crystals with a high level of order in molecular sequence are melted, they generally turn liquid, which has fluidity but no such order at all. However, thin bar-shaped organic molecules, when they are melted, keep their order in a molecular direction although they lose it in molecular positions. In the state in which molecules are in a uniform direction, they also have refractive indices, dielectric constants and other physical characteristics similar to those of crystals, depending on their direction, even though they are liquid. This is why they are called liquid crystal. The diagram below shows the structure of 5CB (4-pentyl-4’-Cyanobiphenyl) as an example of liquid crystal molecules. 

An example of a liquid crystal molecule

Principle of liquid crystal display

A liquid crystal display (LCD) has liquid crystal material sandwiched between two sheets of glass. Without any voltage applied between transparent electrodes, liquid crystal molecules are aligned in parallel with the glass surface. When voltage is applied, they change their direction and they turn vertical to the glass surface. They vary in optical characteristics, depending on their orientation. Therefore, the quantity of light transmission can be controlled by combining the motion of liquid crystal molecules and the direction of polarization of two polarizing plates attached to the both outer sides of the glass sheets. LCDs utilize these characteristics to display images.

Working principle of an LCD

TFT LCD

An LCD consists of many pixels. A pixel consists of three sub-pixels (Red/Green/Blue, RGB). In the case of Full-HD resolution, which is widely used for smartphones, there are more than six million (1,080 x 1,920 x 3 = 6,220,800) sub-pixels. To activate these millions of sub-pixels a TFT is required in each sub-pixel. TFT is an abbreviation for “Thin Film Transistor”. A TFT is a kind of semiconductor device. It serves as a control valve to provide an appropriate voltage onto liquid crystals for individual sub-pixels. A TFT LCD has a liquid crystal layer between a glass substrate formed with TFTs and transparent pixel electrodes and another glass substrate with a color filter (RGB) and transparent counter electrodes. In addition, polarizers are placed on the outer side of each glass substrate and a backlight source on the back side. A change in voltage applied to liquid crystals changes the transmittance of the panel including the two polarizing plates, and thus changes the quantity of light that passes from the backlight to the front surface of the display. This principle allows the TFT LCD to produce full-color images.

Structure of a TFT LCD

Source: https://madhavuniversity.edu.in/liquid-crystalline-materials.html

Source: Merck KGaA

Source: Merck KGaA

After over 120 years of research in liquid crystals, a large number of liquid crystal phases have been discovered. Liquid crystal phases have a range of different structures, but all have one thing in common: they flow in a similar way to viscous liquids, but show the physical behavior of crystals. Their appearance depends on various criteria, including molecular structure and temperature, as well as their concentration and the solvent.

A crystal can be described using a coordinate system. Each atom of a molecule has its specific position. The structure of a crystal can be reduced to a tiny unit, the primitive cell, which is repeated periodically in all three dimensions. This periodicity describes the long-range order of a crystal. A crystal is a highly ordered system in which the physical properties have different characteristics according to the viewing angle. This is called anisotropy. The properties of a liquid crystal phase are also anisotropic, although the structure can no longer be described in a coordinate system. The periodicity and thus the long-range order are lost. Molecules orient themselves by their neighboring molecules, so that only short-range order can be observed. In contrast, a liquid is a completely disordered system, in which the physical properties are isotropic, i.e. directionally independent. What a liquid crystal phase and a liquid have in common is fluidity.

THERMOTROPIC NEMATIC PHASE

In LCD technology, the thermotropic nematic phase is by far the most significant phase. It is formed from rod-shaped (calamitic) molecules that arrange themselves approximately parallel to each other. These molecules can also form smectic phases, which exist in multiple manifestations. Smectic phases are more ordered than nematic phases: as well as the parallel alignment of the molecules, they also form layers.

As the temperature rises, the order of a system decreases. The temperature at which a liquid crystal phase is converted to the isotropic liquid is called the clearing point. A substance may form one or more liquid crystal phases if the structural conditions allow this. However, the appearance of liquid crystal phases is not necessarily a consequence of the molecular structure.

Source: Liquid Crystalline materials used in LCD display

Source: https://madhavuniversity.edu.in/liquid-crystalline-materials.html

Types of LCD Technologies

Source: Merck KGaA

  • Twisted nematic (TN)
  • Vertical alignment (VA)
  • Polymer stabilized VA variant (PS-VA)
  • Self alignment vertical alignment (SA-VA)
  • In-plane switching (IPS)
  • Fringe field switching (FFS)
  • Ultra-brightness fringe field switching (UB-FFS)
  • Blue Phase

Source: Merck KGaA

Components of a LCD Panel

In Plane Switching IPS Technology

  • Unpolarized Light
  • Polarizer
  • Glass Substrate
  • Thin Film Transistor
  • TFT Electrode
  • Orientation Layer
  • Liquid Crystals
  • Polarized Light
  • Orientation Layer
  • Color Filter
  • Glass Substrate
  • Analyzer
  • Emitted Light

Vertical Alignment VA Technology

  • Back Lighting Unit (BLU) – Source of Unpolarized Light
  • 1 st Polarizing Filter – Input Polarizer
  • Glass Substrate – backbone
  • Thin Film Transistor (TFT)
  • TFT Electrode
  • Orientation Layer – Thin Film Transistors
  • RM/additive Polymer layer – orientation of liquid crystal molecules and for fixing “pretilt angle”
  • RM Polymer Layer
  • Liquid Crystals
  • Polarized Light
  • RM/additive polymer layer
  • RM Polymer layer
  • Orientation layer
  • Electrode
  • Color filter
  • Glass Substrate
  • 2 nd Polarizing filter

Materials used in making Displays

Source: Merck KGaA Germany

  • Liquid Crystals
  • OLED Materials
  • Photoresists
  • Siloxanes
  • Silozanes
  • LED Phosphores
  • Quantum Materials
  • Reactive Mesogens

Three main components of a LCD Panel are discussed below in some detail.

  • Backplane Technology
  • Color Filter
  • Backlighting

Backplane Technology

What Is An LTPS LCD?

August 10, 2019

Low-temperature polycrystalline silicon (or LTPS) LCD—also called LTPS TFT LCD—is a new-generation technology product derived from polycrystalline silicon materials. Polycrystalline silicon is synthesised at relatively low temperatures (~650°C and lower) as compared to traditional methods (above 900°C).

Standard LCDs found in many consumer electronics, including cellphones, use amorphous silicon as the liquid for the display unit. Recent technology has replaced this with polycrystalline silicon, which has boosted the screen resolution and response time of devices.

Row/column driver electronics are integrated onto the glass substrate. The number of components in an LTPS LCD module can be reduced by 40 per cent, while the connection part can be reduced by 95 per cent. The LTPS display screen is better in terms of energy consumption and durability, too.

LTPS LCDs are increasingly becoming popular these days. These have a high potential for large-scale production of electronic devices such as flat-panel LCD displays or image sensors.

Amorphous silicon lacks crystal structure, whereas polycrystalline silicon consists of various crystallites or grains, each having an organised lattice (Fig. 1).

Amorphous silicon versus polycrystalline silicon (Credit: Wikipedia)
Fig. 1: Amorphous silicon versus polycrystalline
silicon (Credit: Wikipedia)

Advantages of an LTPS LCD display are:

  • Dynamic and rich colours
  • Fast response and less reflective
  • High picture resolution

Some of its disadvantages are:

  • Deteriorates faster than other LCDs
  • High cost

Display technology explained: A-Si, LTPS, amorphous IGZO, and beyond

ultra slim bezel tablet

LCD or AMOLED1080p vs 2K? There are plenty of contentious topics when it comes to smartphone displays, which all have an impact on the day to day usage of our smartphones. However, one important topic which is often overlooked during analysis and discussion is the type of backplane technology used in the display.

Display makers often throw around terms like A-Si, IGZO, or LTPS. But what do these acronyms actually mean and what’s the impact of backplane technology on user experience? What about future developments?

For clarification, backplane technology describes the materials and assembly designs used for the thin film transistors which drive the main display. In other words, it is the backplane that contains an array of transistors which are responsible for turning the individual pixels on and off, acting therefore as a determining factor when it comes to display resolution, refresh rate, and power consumption.Display Panel TransistorsNote the transistors at the top of each colored pixel.

Examples of backplane technology include amorphous silicon (aSi), low-temperature polycrystalline silicon (LTPS) and indium gallium zinc oxide (IGZO), whilst LCD and OLED are examples of light emitting material types. Some of the different backplane technologies can be used with different display types, so IGZO can be used with either LCD or OLED displays, albeit that some backplanes are more suitable than others.

a-Si

Amorphous silicon has been the go-to material for backplane technology for many years, and comes in a variety of different manufacturing methods, to improve its energy efficiency, refresh speeds, and the display’s viewing angle. Today, a-Si displays make up somewhere between 20 and 25 percent of the smartphone display market.Poly-Si-TFT-vs-a-SiH-TFT-vs-Oxide-TFTA spec comparison of common TFT types.

For mobile phone displays with a pixel density lower than 300 pixels per inch, this technology remains the preferable backplane of choice, mainly due to its low costs and relatively simple manufacturing process. However, when it comes to higher resolution displays and new technologies such as AMOLED, a-Si is beginning to struggle.

AMOLED puts more electrical stress on the transistors compared with LCD, and therefore favours technologies that can offer more current to each pixel. Also, AMOLED pixel transistors take up more space compared with LCDs, blocking more light emissions for AMOLED displays, making a-Si rather unsuitable. As a result, new technologies and manufacturing processes have been developed to meet the increasing demands made of display panels over recent years.

LTPS

LTPS currently sits as the high-bar of backplane manufacturing, and can be spotted behind most of the high end LCD and AMOLED displays found in today’s smartphones.  It is based on a similar technology to a-Si, but a higher process temperature is used to manufacture LTPS, resulting in a material with improved electrical properties.Backplane currentsHigher currents are required for stable OLED panels, which a-Si falls short of.

LTPS is in fact the only technology that really works for AMOLED right now, due to the higher amount of current required by this type of display technology. LTPS also has higher electron mobility, which, as the name suggests, is an indication of how quickly/easily an electron can move through the transistor, with up to 100 times greater mobility than a-Si.

For starters, this allows for much faster switching display panels. The other big benefit of this high mobility is that the transistor size can be shrunk down, whilst still providing the necessary power for most displays. This reduced size can either be put towards energy efficiencies and reduced power consumption, or can be used to squeeze more transistors in side by side, allow for much greater resolution displays. Both of these aspects are becoming increasingly important as smartphones begin to move beyond 1080p, meaning that LTPS is likely to remain a key technology for the foreseeable future.display technology revenue sharesLTPS is by far the most commonly used backplane technology, when you combine its use in LCD and AMOLED panels.

The drawback of LTPS TFT comes from its increasingly complicated manufacturing process and material costs, which makes the technology more expensive to produce, especially as resolutions continue to increase. As an example, a 1080p LCD based on this technology panel costs roughly 14 percent more than a-Si TFT LCD. However, LTPS’s enhanced qualities still mean that it remains the preferred technology for higher resolution displays.

IGZO

Currently, a-Si and LTPS LCD displays make up the largest combined percentage of the smartphone display market. However, IGZO is anticipated as the next technology of choice for mobile displays. Sharp originally began production of its IGZO-TFT LCD panels back in 2012, and has been employing its design in smartphones, tablets and TVs since then. The company has also recent shown off examples of non-rectangular shaped displays based on IGZO. Sharp isn’t the only player in this field — LG and Samsung are both interested in the technology as well.IGZO vs aSi 1Smaller transistors allow for higher pixel densities

The area where IGZO, and other technologies, have often struggled is when it comes to implementations with OLED. ASi has proven rather unsuitable to drive OLED displays, with LTPS providing good performance, but at increasing expense as display size and pixel densities increase. The OLED industry is on the hunt for a technology which combines the low cost and scalability of a-Si with the high performance and stability of LTPS, which is where IGZO comes in.

Why should the industry make the switch over to IGZO? Well, the technology has quite a lot of potential, especially for mobile devices. IGZO’s build materials allow for a decent level of electron mobility, offering 20 to 50 times the electron mobility of amorphous silicon (a-Si), although this isn’t quite as high as LTPS, which leaves you with quite a few design possibilities. IGZO displays can therefore by shrunk down to smaller transistor sizes, resulting in lower power consumption, which provides the added benefit of making the IGZO layer less visible than other types. That means you can run the display at a lower brightness to achieve the same output, reducing power consumption in the process.

IGZO vs aSi 2

One of IGZO’s other benefits is that it is highly scalable, allowing for much higher resolution displays with greatly increased pixel densities. Sharp has already announced plans for panels with 600 pixels per inch. This can be accomplished more easily than with a-Si TFT types due to the smaller transistor size.

Higher electron mobility also lends itself to improved performance when it comes to refresh rate and switching pixels on and off. Sharp has developed a method of pausing pixels, allowing them to maintain their charge for longer periods of time, which again will improve battery life, as well as help create a constantly high quality image.

IGZO vs aSi 3

Smaller IGZO transistors are also touting superior noise isolation compared to a-Si, which should result in a smoother and more sensitive user experience when used with touchscreens. When it comes to IGZO OLED, the technology is well on the way, as Sharp has just unveiled its new 13.3-inch 8K OLED display at SID-2014.

Essentially, IGZO strives to reach the performance benefits of LTPS, whilst keeping fabrications costs as low as possible. LG and Sharp are both working on improving their manufacturing yields this year, with LG aiming for 70% with its new Gen 8 M2 fab. Combined with energy efficient display technologies like OLED, IGZO should be able to offer an excellent balance of cost, energy efficiency, and display quality for mobile devices.

What’s next?

Innovations in display backplanes aren’t stopping with IGZO, as companies are already investing in the next wave, aiming to further improve energy efficiency and display performance. Two examples worth keeping an eye are on are Amorphyx’ amorphous metal nonlinear resistor (AMNR) and CBRITE.lg g3 aa (7 of 22)Higher resolution smartphones, such as the LG G3, are putting increasing demands on the transistor technology behind the scenes.

Starting with AMNR, a spin-off project which came out of Oregon State University, this technology aims to replace the common thin-film transistors with a simplified two-terminal current tunnelling device, which essentially acts as a “dimmer switch”.

This developing technology can be manufacturing on a process that leverages a-Si TFT production equipment, which should keep costs down when it comes to switching production, whilst also offering a 40 percent lower cost of production compared with a-Si. AMNR is also touting better optical performance than a-Si and a complete lack of sensitivity to light, unlike IGZO. AMNR could end up offering a new cost effective option for mobile displays, while making improvements in power consumption too.

CBRITE, on the other hand, is working on its own metal oxide TFT, which has a material and process that delivers greater carrier mobility than IGZO. Electron mobility can happily reach 30cm²/V·sec, around the speed of IGZO, and has been demonstrated reaching 80cm²/V·sec, which is almost as high as LTPS. CBRITE also appears to lend itself nicely to the higher resolution and lower power consumption requirements of future mobile display technologies.LTPS vs CBRITE performance with OLEDLTPS vs CBRITE spec comparison for use with OLED displays

Furthermore, this technology is manufactured from a five-mask process, which reduces costs even compared to a-Si and will certainly make it much cheaper to manufacture than the 9 to 12 mask LTSP process. CBITE is expected to start shipping products sometime in 2015 or 2016, although whether this will end up in mobile devices so soon is currently unknown.

Smartphones are already benefiting from improvements in screen technology, and some would argue that things are already as good as they need to be, but the display industry still has plenty to show us over the next few years.

Color Filter Array (CFA)

Source: BASF

Source: BASF

Cathode ray tube television sets have long had their day. Flat screen TVs now provide energy-efficient, low-emission entertainment in three out of four German households, according to the Federal Statistical Office. And this figure is rising, Germans are estimated to have purchased eight million flat screen television sets in 2015, most of which are LCDs. LCD technology is also the basis for many other contemporary communication devices, including smartphones, laptops and tablets. After all, with experts forecasting six percent global annual sales growth for flat-panel displays until 2020.

LCD stands for liquid crystal display. Liquid crystals form the basis for billions of flat-panel displays. The American, George H. Heilmeier, unveiled the first monochrome LCD monitor to the expert community in 1968. Commercialization of the first color monitors took another 20 years. Flat screen TVs started sweeping the world in the 1990s, mainly because of the availability of high-performance color filter materials.

The images on a liquid crystal display with the standard resolution are made up of about two million picture elements, better known as pixels. The color filter pigments attached to the liquid crystal cells are what give each pixel its color. Screen contrast and color purity remain a challenge, however. 

Pigment properties make all the difference

Red, green, and blue: Every pixel contains these three primary colors. The colors are composed of tiny crystals about a thousand times smaller in diameter than a human hair. The crystals act as a filter for the white backlight and only allow light waves from a selected range of the visible spectrum to pass through. These light waves show one of the three colors in its purest possible form. The filters block all the other wavelengths. “A good pigment has a significant impact on the brilliance of the colors the viewer sees,” said Dr. Hans Reichert, head of colorants research at BASF.

“Although perfect color selection is not feasible with absorbing materials, we come fairly close to perfection with our red filters.” Color purity also has an impact on the range of colors available. The greater the purity of the three primary colors, the more permutations that can be achieved by mixing them – and the more colorful the image.

The picture shows a chemical reaction in the lab yielding diketopyrrolopyrroles, the substances BASF’s red filter pigments are made of. Diketopyrrolopyrroles are aromatic organic ring compounds mainly consisting of carbon, nitrogen and oxygen.

The basic principle is simple. When the color red appears on the screen, the corresponding subpixel lets the red portion of light pass through and absorbs the rest. The other two subpixels – for blue and green – are deactivated when this happens. If, on the other hand, light penetrates through the red and green subpixel while the blue is deactivated, the colors combine to give a rich yellow. Fine-tuning the portions of the three primary colors in this manner produces millions of hues.

The liquid crystals fine-tune the blend of colors by twisting the plane of oscillation of the light waves. “This determines the brightness and color of the subpixels,” said Ger de Keyzer, in charge of applications engineering for color filter materials at BASF. “The liquid crystals change direction, and in that way alter their optical properties depending on the voltage applied.” They rotate the plane of oscillation of light waves to allow the light to pass through the second polarization filter. When an electrical field is applied, however, the crystals prevent some or all of the light from getting through.

To ensure that subpixels switch on and off the way they are supposed to, it is essential to prevent interferences from the color filter pigments. Any interferences resulting in scattering and depolarization of light will allow the light to pass uncontrolled through the filter. This contaminates the colors and compromises the contrast.

Smaller the better

“A good rule of thumb is: The smaller and more regular the crystals, the lower the scattering and the better the LCD image quality,” de Keyzer said. Researchers control the process mainly by managing the conditions in which pigment crystallization takes place. The underlying molecular structure is what determines which parts of the color spectrum are filtered out.

The organic red pigments that BASF manufactures consist mainly of carbon, nitrogen, and oxygen, and belong to the class of diketopyrrolopyrroles (DPPs). Blue and green pigments are phthalocyanine metal complex compounds. The raw product produced through chemical synthesis is mainly composed of irregular particles. They must then be brought into the ideal size and shape. This is done by a process called pigment finishing. Crystals that are too small are dissolved and precipitated onto the larger crystals. Crystals that are too large are broken into smaller pieces by a mechanical process until the balance is right. Dr. Roman Lenz, BASF lab team leader in charge of new color filter material synthesis, explained: “Our technology gives us color particles of 20 to 40 nanometers – small enough to reduce light scattering to an absolute minimum but large enough to provide a high degree of stability.” BASF has honed the technology almost to perfection with its products. The color particles in the latest generation of the Irgaphor® Red product suite are smaller than 0.00004 millimeters, and have double the contrast performance of their predecessors.

Tomorrow’s television screens will have to meet even higher expectations in terms of resolution and color purity. In anticipation of the new demands, Lenz and his colleagues are taking their lab experiments one step further. Their aim is to find new materials that will show colors in an even more natural light.

Source: STRUCTURE OF COLOR FILTERS/Toppan

Market Demands for Color Filters

Source: Toppan Japan

Source: STRUCTURE OF COLOR FILTERS/Toppan

Manufacturing Process of Color Filters

Source: Toppan Japan

Dyes and Pigments Used in Color Filters

  • Red Pigment/Dye
  • Green Pigment/Dye
  • Blue Pigment/Dye

High Transmittance, Low Scattering

Source: Past, present, and future of WCG technology in display

Dyes/Pigment Suppliers

  • DIC/Sun Chemicals. – Green and Blue
  • BASF – Red
  • Merck KGaA
  • Solvay
  • Clariant
  • Sumitomo Chemicals

Source: DIC Japan

Pigments for Color Filters Used in LCDs and OLED Displays(Functional Pigments)

Pigments for Color Filters Used in LCDs and OLED Displays(Functional Pigments)

Value Creation Global market-leading pigments that deliver outstanding brightness and picture quality

Color images on liquid crystal displays (LCDs) used in LCD televisions, computers and smartphones are produced using the three primary colors of light—red (R), green (G) and blue (B). These colors are created using pigments. LCDs produce images by transmitting light emitted from a backlight lamp through a color filter to which an RGB pattern has been applied. As a consequence, the pigments used in the color filter are crucial to picture quality.
With Japan’s shift to digital terrestrial television driving up demand for flatpanel LCD televisions and the popularity of smartphones increasing, in 2007 DIC launched the G58 series of green pigments, which achieved a remarkable increase in brightness. The series includes FASTOGEN GREEN A350, a green pigment characterized by outstanding brightness and contrast that ensures excellent picture quality even with little light from the backlight. In fiscal year 2014, DIC developed the G59 series of green pigments for wide color gamut color filters, which deliver superior brightness and color reproduction, making them suitable for use in filters for next-generation high-definition displays, including those for ultra-high-definition (UHD) televisions. DIC currently enjoys an 85%- plus share of the global market for green pigments for color filters, making its products the de facto standard. DIC also manufactures blue pigments for color filters. In 2012, the Company developed the A series, which boasts a superb balance between brightness and contrast. The optical properties of pigments in this series have earned high marks from smartphone manufacturers and boosted DIC’s share of the global market for blue pigments to approximately 50%.
DIC’s pigments for color filters, which satisfy the diverse performance requirements of displays used in LCD televisions, smartphones, tablets and notebook computers while at the same time adding value, have been adopted for use by many color filter manufacturers. In addition to improving picture quality, these pigments reduce energy consumption and, by extension, lower emissions of CO2. Having positioned pigments for color filters as a business that it expects to drive growth, DIC continues working to reinforce its development and product supply capabilities.

Applying technologies amassed through the production of printing inks to the development and expansion of functional pigments that have become the de facto standard worldwide

DIC first succeeded in developing offset printing inks in-house in 1915 and 10 years later began production of organic pigments for its own use. Over subsequent years, the Company amassed development and design capabilities, as well as production technologies, crucial to the manufacture of fine chemicals and in 1973 commercialized revolutionary high-performance, long-lasting nematic LCs, which were adopted by Sharp Corporation for use in the world’s first pocket calculator incorporating an LCD. DIC’s passion and development prowess are also evident in its pigments for color filters.
Large-screen LCD televisions are expected to deliver superbly realistic and accurate color reproduction. The small LCDs used in smartphones and other devices must be clear, easy to read and bright enough to ensure legibility even with less light. This is because reduced light requirements results in longer battery life. Increasing brightness requires making color filters thinner and more transparent, but this alone will not deliver vivid colors and resolution. With the question of how best to realize both high brightness and vivid colors on ongoing challenge for display manufacturers, DIC has responded by developing innovative pigments for this application.
Copper has traditionally been the central material used in green pigments. In developing its green pigments for color filters, DIC defied conventional wisdom by exploring the use of a different central material with the goal of further enhancing performance characteristics. Through a process of trial and error, the Company narrowed down the list of suitable materials from a wide range of candidates, eventually choosing zinc. DIC also significantly improved transparency by reducing the size of pigment particles, thereby achieving a dramatic increase in contrast, which ensures a bright, clear picture quality even with less light. The outcome of these efforts was the groundbreaking G58 series.

Picture quality is influenced significantly by the brightness and contrast of the pigment used in the color filter. (Left: High brightness and high contrast; Right: Low brightness and low contrast)

In the area of blue pigments for color filters, DIC also leveraged its superior molecular design capabilities to achieve outstanding tinting strength and precise particle size control. To develop the A series of blue pigments for color filters, the Company also employed specialty particle surface processing to ensure highly stable dispersion, realizing an excellent balance between brightness and contrast. Products in the A series currently dominate the market for blue pigments for color filters, delivering excellent optical properties that continue to earn solid marks from smartphone manufacturers.
DIC’s success in developing a steady stream of pioneering functional pigments is supported by the seamless integration of basic technologies amassed in various fields as a manufacturer of color materials, the crossbusiness R&D configuration of its Central Research Laboratories and production technologies that facilitate the mass production of products with performance characteristics realized in the laboratory.

KEY PERSON of DIC

We are making full use of the DIC Group’s global network at all stages, from the promotion of product strategies through to the expansion of sales channels.

Manager, Pigments Sales Department 2, Pigments Product Division Naoto Akiyama

The value chain extending from functional pigments through to color filters for LCDs encompasses manufacturers of pigments, pigment dispersions, resist inks, color filters and LCDs. In developing pigments for color filters, we gather information on the latest trends from LCD manufacturers, which we apply to the formulation of nextgeneration product strategies.
Production of pigment dispersions, color filters and LCDs is concentrated primarily in East Asia. Recent years have seen a particularly sharp increase in the People’s Republic of China (PRC), which is on the verge of overtaking the Republic of Korea (ROK) as No. 1 in terms of volume produced. We are making full use of the DIC Group’s global network by working closely with local Group companies to bolster the adoption of DIC pigments for color filters for use in LCDs.

Manager, Pigments Sales Department 2, Pigments Product Division Naoto Akiyama

Source: Emperor Chemicals China

Color filter (CF, COLOR FILTER) is one of the most important components of a color liquid crystal display, which directly determines the quality of the color image of the display. The rapid growth of LCD displays is supported by the strong demand for flat-panel color displays from notebooks (PCs, Personal Computers). The portable characteristics of the LCD, such as small outline size, thinness, lightness, high definition, and low power consumption, greatly meet the needs of notebook PCs. It is believed that in the multimedia age, TFT-LCD will have a huge advantage. Color filters are the key elements that make up a color image.

The color of the color filter may be dyed with a water-soluble dye, or a pigment dispersion method in which a pigment is colored. The pigment dispersion method includes the use of UV-curable phtoresists: colored pigments, UV-curable carrier resins, photo initiators, organic solvents, dispersants and other ingredients, among which organic pigments are colored The requirements for coloring properties of the agent, such as high vividness, specific primary color (RGB), three spectral hue, durability, chemical resistance and high transparency, etc., are mainly the selection of high-grade organic pigments through efficient dispersion Treatment process to obtain a pigment dispersion with a fine and stable particle size, and to prepare photoresist inks for color filters. Compared with the dyeing method, it has excellent moisture resistance, light fastness, and heat stability, but the pigment dispersion must be further improved Technology to prepare color filters with high transparency and pigment purity.

The color filter in the liquid crystal display adopts the principle of additive method, and uses blue, green and red organic pigments. Based on the spectral color and durability requirements of colorants, pigments for blue and green color photoresist inks are usually selected: phthalocyanine CI pigment blue 15: 1, pigment blue 15 :0, pigment blue 15: 3, Pigment Blue 15: 4, Pigment Blue 15: 6, and anthraquinone-based pigments such as CI Pigment Blue 60 and the like. Green tone C.I. Pigment Green 36.

In particular, the spectral absorption characteristics of CI Pigment Blue 15: 6 and CI Pigment Green 36 are well matched with the wavelengths and emission intensities of the blue, green, and red fluorescence emission spectra (fluorescence lamp for LCD backlight) in liquid crystal displays. In order to further improve the spectral characteristics, it is possible to adjust by adding a small amount of pigments of other colors, such as adding CI Pigment Violet 23 to obtain a stronger red light blue, and adding CI Pigment Yellow 150 to obtain a stronger yellow light green.

The selection of pigments should be based on obtaining a high-definition spectrum, eliminating unnecessary wavelength spectra, and retaining only the necessary color light. Selecting the organic pigment varieties required by the appendix, the color light purity and transmittance of the color filter can also be improved.

In order to adjust the spectral characteristics of the color filter, such as hue, tinting strength and contrast, for red, green and blue spectrum pigments, a second pigment component is often added to fight the color. For example, select some yellow with excellent durability, Purple organic pigment varieties, CI Pigment Yellow 138, CI Pigment Yellow 139, CI Pigment Yellow 150, CI Pigment Yellow 180, CI Pigment Purple 23 and other varieties.

Recommended organic pigments of three primary colors of red, blue and green are as follows:

Red organic pigments: The main varieties are high-grade organic pigments such as: C.I. Pigment Red 122, C.I. Pigment Red 177, C.I. Pigment Red 242, C.I. Pigment Red 254, and specific yellow organic pigment varieties are added if necessary.

Green organic pigments: C.I. Pigment Green 7, C.I. Pigment Green 36 is mainly selected, and specific yellow organic pigment varieties are matched, and specific yellow organic pigment varieties are added if necessary.

Blue organic pigments: C.I.Pigment Blue 5, C.I.Pigment Blue 15: 3, C.I.Pigment Blue 15: 6, C.I.Pigment Blue 60, etc., if necessary, specific yellow pigments and pigment violet 23.

Color Filter Less Technology

The liquid crystal display (LCD)is a thin, flat display device, which is made up of many number of color or monochrome pixels arrayed in front of a light source or reflector. It is prized for its superb image quality, such as low-voltage power source, low manufacturing cost, compared with other display device including CRT, plasma, projection, etc. Today the LCD device has been widely used in portable electronics such as cell phones, personal computers, medium and also in large size television display.

The LCD device consists of two major components, TFT-LCD panel and Back Light Unit (BLU). As LCD device can not light actively itself, thus a form of illumination, back light unit is needed for its display. While one of the key parts in LCD panel is color filter. The color filter is a film frame consists of RGB primary colors, and its function is to generate three basic colors from the back light source for LCD display. As a whole, back light and color filter are the two vital components of the perfect color display for LCD device.

Traditionally people use the cold cathode fluorescent lamp (CCFL)as the back light source for medium and large size LCD device. However CCFL has several disadvantages. For example, narrow color representation, low efficiency, complex structure, limited life, and the CCFL needs to be driven by a high-voltage inverter, consequently requires more space. Another disadvantage is the environmental problem for the mercury inside it. So people try to find an ideal back light module for LCD display.

Nowadays, the back light technology for LCD device towards the trend of using light emitting devices (LED). For its excellent advantages, the LCD device based on LED back light owns promoted display performance. As a new generation of solid-state light source, LED can produce very narrow spectrum, thus can generate a high color saturation, as a result it provides LCD device delivering a wider color gamut of above 100% of NTSC specification than the only 70% of CCFL back light. Moreover the LED only need DC power drive instead of a DC-AC inverter, so simplifies the back light structure. In a word, LED back light makes LCD obtain quite a higher display quality than the conventional CCFL back light. Despite of these advantages, there are also several challenges for LED back light technology currently, such as efficiency, stable ability, heat dissipation and cost etc. so people are trying to get some substantial breakthrough at the technical problems above to make LED back light as the key technology part for LCD device.

Color filter is another key component of the LCD device. As a sophisticated part, its fabrication takes an extremely complicated process, consequently the color filter occupies quite a large proportion of the production cost of the LCD devices. While a serious deficiency is its greatly influence on the light utilization rate. Generally speaking, only about 30% the amount of the light emitted from the back light can be delivered, while the rest of the light is wasted while passing the color filter.

For this, people prefer to designing a new form of LCD module which can get rid of the color filter, to promote the efficiency of light utilization. So an idea of Color Filter-Less (CFL) technology was put forward. The Field Sequential color LCD designed by Sumsang company is the first form of Color Filter-Less technology which is an idea of changing the space color mixing into the time color mixing.

Especially, we design a film frame which is patterned of red and green emitting phosphors, then make it be excited by blue light from a blue LED panel we fabricated. For its special emitting mechanism, this phosphor film can generate red and green emissions respectively. Meanwhile not all the blue light is absorbed by the phosphors, the remnant blue light can pass the film frame, therefore we can achieve a panel frame on which the RGB colors mixed together, thus to replace of the color filter in LCD device.

Backlighting

  • CCFL Cold Cathode Fluorescent Lamp
  • LED
    • RGB LED Backlighting
    • An Edge backlight with white LEDs
    • A flat backlight based on white LEDs

Source: TFTCentral.co.UK

Recent Technological Innovations

  • LCD with LED Backlighting
  • Mini LED
  • Micro LED
  • LCD with Quantum Dot QDEF
  • Wide Color Gamut WCG
  • Color Filter Less LCD
  • Vertically Stacked OLED Layers (SOLED)
  • Quantum Dot Color Filter QDCF
  • RGBW LED 4 colors
  • Bright Dyes and Pigments
  • Color Filters using Structural Colors
  • Transreflective Displays
  • Reflective Displays
  • Blue LED plus Red Green Color Filter
  • Flexible displays -bendable, rollable, fixed, curved, foldable
  • Touch Screens
  • Transparent Displays

Vertically Stacked RGB OLED layers (SOLED)

Source: Three-terminal RGB full-color OLED pixels for ultrahigh density displays

https://www.nature.com/articles/s41598-018-27976-z

TFT based Vertically stacked OLEDs

Source: Thin-film transistor-driven vertically stacked full-color organic light-emitting diodes for high-resolution active-matrix displays

https://www.ncbi.nlm.nih.gov/pmc/articles/PMC7264127/

Supply Chain for TFT-LCD Manufacturing

Light Emitting Diodes (LEDs)

Source: https://www.lighting.philips.com/main/support/support/faqs/white-light-and-colour/what-are-the-different-types-of-rgb-leds

What are the different types of RGB LEDs?

The following are the different types of RGB LEDs:

  • R/G/B/W – Has an additional white LED. This is often used where you need a pure white as well other combined colors.
  • RGB / 3 in 1 LED – Uses a red, a blue and a green LED chip are mounted within a common light engine and focused through a lens to produce a more uniform hue across the beam of light.
  • RGBW / 4 in 1 LED – similar to the RGB LED but with a warm white LED integrated in the light engine to offer more color tones.
  • RGBA – Has an additional amber LED chip.

White vs RGB LEDs

White LED’s are actually blue leds with a yellow phosphor, and thus creating an white impression. This technique allows a colour gamut slightly wider than sRGB, but not very “colourfull”. RGB leds consist of 3 individual colour leds, red, green and blue. These allow an enourmous colour gamut that covers most standards like AdobeRGB and NTSC. Panels with RGB LED’s are much more expensive, as they need much more calibration logic. It is very hard to tame extreme gamut for say sRGB use, and the ballance of the colours is constantly monitored. RGB LED displays are doing twice the price of WLED’s with ease.

Composition of OLED Display

  • RGB OLED
  • White OLED

Source: Past, present, and future of WCG technology in display

OLED Technologies

  • Shadow Mask Patterning Method
  • Color Filter Method

Source: https://global.pioneer/en/corp/group/tohokupioneer/mainbusinesses/oled/introduction/

Color Patterning Technologies

Ink Jet and Photolithography are methods of making color filters.

Source: https://onlinelibrary.wiley.com/doi/10.1002/9781119187493.ch5

This chapter discusses the color patterning technologies, which gives major contribution to cost and productivity. The technologies discussed include shadow mask patterning, white‐color filter method, laser‐induced thermal imaging method, radiation‐induced sublimation transfer method, and dual‐plate OLED display method. Low material utilization can bring high cost, so it is very critical to suppress material consumption during OLED display manufacturing. To address this, various high‐material‐utilization next‐generation OLED manufacturing processes, such as the vapor injection source technology (VIST) method, hot‐wall method, and organic vapor‐phase deposition (OVPD) have been proposed and are discussed in the chapter.

Source: https://www.findlight.net/blog/2020/01/22/oled-production-composition-and-color-patterning-techniques/

OLED Production: Composition and Color Patterning Techniques

Last updated on January 22, 2020

Organic Light-Emitting Diodes (OLEDs) are most famously known for their use in foldable smart phone displays. From the Samsung Galaxy Fold to the Huawei Mate X (2019), these devices offer huge screens that can fold down to the size of a more traditional smartphone screen. This revolutionary new technology is made possible by the properties and composition of OLED screens. In traditional Liquid Crystal Display (LCD) screens, a glass pane covers the actual liquid crystal display that emits the light. On the other hand, OLED screens have the light emitting technology already built into them. Thus, when you touch interact with an OLED device, you are touching the actual display too. OLED screens are often made of a type of plastic, which allows for flexibility and folding screens. These devices also require OLED color patterning techniques in order to integrate color into the display devices, which we will describe further in the upcoming sections.

Intro to OLED Composition

Now, we will brief on the composition and integration of OLED technology in this plastic screen. OLEDs are made of two or three organic layers sandwiched between two electrodes (cathode and anode) on top of a substrate layer. The organic layers and electrodes emit light in response to an electric current. One of the most difficult processes in manufacturing these OLEDs is attaching the organic layers to the substrate. For example, organic vapor phase deposition and inkjet printing are both efficient methods that can reduce the cost of producing OLED displays.OLED cell structure diagram

OLED components include organic layers that are made of organic molecules or polymers. This diagram is a two (organic) layer model.
Courtesy of HowStuffWorks.

Another big part of OLED manufacturing is the color patterning step, which allows the OLED device to display color. There are various methods in use for OLED color patterning, including photolithography. Lithography is commonly used for semiconductors and TFTs, but presents challenges for OLEDs. This is due to the high temperature and humid conditions required for attaching OLED layers together. In this article we will explore three different color patterning technologies that have arisen for more efficient and accurate OLED optical manufacturing.

OLED Color Patterning and Masking Techniques

First, we have the “Shadow Mask Patterning Method” consists of placing red, green, and blue light emitting layers in a pattern in each pixel of the OLED device. Further, this has the advantage that each subpixel gets appointed a single, distinct color which produces great clarity of images. Unlike the other methods, there are no outer color filters required to produce the images. Thus, this method saves energy and is one of the most efficient. However, utilizing shadow masks can be an error filled process because the RBG subpixel pattern is outlined with a physical mask a.k.a stencil. We show an example of an accuracy error and its effects in the images below.Shadow RBG mask error

Error produced in processing an OLED with a red pixel mask. We can see that the spacing in the pattern is off around the red arrow. Courtesy of Tsujimura.OLED screen color variation

The resulting color variation in OLED screen due to shadow mask deformation. shown above. Courtesy of Tsujimura.

Second, we have the “Color Filter Method” a.k.a. “White+Color Filter Patterning” method. In this method, the OLED itself is also designed and manufactured with all three color elements in each pixel. However, different from the “Shadow Mask Patterning” method, these OLEDs only produce white light. Next, additional red, green, and blue color filters are utilized to match the desired color output. Accordingly, this process allows for a dynamic range of colors to be emitted with different levels of filtering. However, a big consequence of using color filters is that the purity of the image may be compromised due to interactions of the OLED light and physical color filters. Equally important is the high power consumption this method eats up. Because the color filters absorb most of the light intensity, the process requires a constant, powerful back light.OLED white + color filter method

Schematic diagram of White+Color filter patterning method for OLEDs. Courtesy of Tsujimura.

Rising OLED Color Patterning Techniques: Electron Beams

In 2016, a new approach for OLED color patterning was developed at the Fraunhofer Institute for Organic Electronics. Researchers utilized electron beam technology to color pattern the organic layers in the OLED. Because this process acted on the micro-scale, it produced extremely accurate, high-resolution results, even with the help of color filters. Further, it also allowed for complex patterns and high-definition (HD) grayscale images. Since then, this technology has been developed and advanced to that of full-color working OLED displays, without the use of external filters.

Now, we will discuss an overview about how the electron beam process works. First, an OLED is produced containing all three RGB organic emitting layers. Akin to the previously mentioned processes, this OLED is designed to produce only white light. Next, a thermal electron beam is directed on the white emitting OLED. The electron beam excites certain molecules in the organic layer of the OLED, which causes the molecules or atoms to separate and become structured. Consequently, the thickness of different areas in the OLED organic layer changes and pixels with distinct colors (RGB) are formed. Moreover, the electron beam patterning process allows for microstructuring into color pixels without perturbing the other substrate and electrode layers.OLED color patterning probe station

Probe station with patterned OLEDs in the clean room.
Courtesy of Fraunhofer FEP.

Conclusion

As more AMOLED, and flexible displays enter the market, OLED technology will continue to become more popular and widespread. One of the most important considerations for OLED availability in mass market, is in screen color production. Rising techniques such as the Electron Beam Patterning method can produce high quality, low cost, and energy efficiency. Another key consideration in OLED screen production is low material consumption. Further rising techniques in research that allow for low material costs include the vapor injection source technology (VIST) method, hot‐wall method, and organic vapor‐phase deposition (OVPD) [1].

This article is made possible by Gentec-EO, the market leader in the manufacture of light detection devices.

Further Reading

[1] https://onlinelibrary.wiley.com/doi/10.1002/9781119187493.ch5

Supply Chains of OLED Displays

Cover Glass

  • Corning Glass
  • Samsung Corning Advanced Glass

TFT Backplane

  • Samsung UBE Materials
  • Sumitomo Chemicals

Frontplane

  • Universal Display Corporation UDC USA

Encapsulation

  • Samsung SDI for Flex OLED
  • KYORITSU CHEMICAL Japan

IC Driver

  • Samsung Semiconductors
  • Synaptics USA

Global Supply Chains for OLED Displays

Silica Sand

  1. Sibelico (Belgium)
  2. US Silica (US)
  3. Emerge Energy (US)
  4. Badger Mining (US)
  5. Wuxi Quechen Silicon Chemical Co. (China)

Display Glass

  1. Corning (US)
  2. Asahi Glass (Japan)
  3. Nippon Electric Glass (Japan)

IC Driver

  1. Samsung (South Korea)
  2. Novatek (Taiwan)
  3. Himax (Taiwan)
  4. Silicon Works (South Korea)
  5. Synaptics (US)

OLED Materials

  1. UDC (US)
  2. Dow DuPont (US)
  3. Merck (US)
  4. Idemitsu Kosan (Japan)
  5. LG Chem (South Korea)

QLED, QDLED, QDOLED, Mini-LED, Micro-LED: What is in the name?

Source: https://www.displayninja.com/mini-led-vs-microled/

Micro LED and Mini LED

MicroLED is the next generation of display technology. Just like OLED, it produces its own light and therefore is capable of infinite contrast ratio. However, since it doesn’t use organic materials, it won’t deteriorate or burn-in over time.

What’s more, MicroLED displays will be brighter than OLED displays, and you will be able to customize their size, aspect ratio, and resolution (modular displays).

Mini-LED, on the other hand, improves on the existing LCDs by replacing their LED backlights with mini-LED backlights, which consist of more efficient and numerous light-emitting diodes that will increase contrast ratio, uniformity, response time, etc.

Although similar in name, microLED and mini-LED technologies are fundamentally diverse.

What is MicroLED?

MicroLED is the leading-edge display technology that is yet to be adjusted to the consumer market; in simpler terms, it’s the display technology of the not-so-distant future.

Similarly to OLED (Organic Light Emitting Diode) technology, MicroLED doesn’t rely on a backlight to produce light. Instead, it uses self-emissive microscopic LEDs, which allow for infinite contrast ratio, just like on OLED displays.

However, unlike OLED, MicroLED technology has no organic materials, so it won’t degrade over time, and you won’t have to worry about image burn-in.

Further, MicroLED displays are capable of higher luminance emission in comparison to OLEDs, which will allow for better details in highlights of the picture for a superior HDR (High Dynamic Range) viewing experience.

Lastly, they can have a unique modular characteristic that would allow you to customize the display’s screen size, resolution, and aspect ratio to your liking by arranging and connecting more panels together.Shop Related Products

What is Mini-LED?

Mini-LED technology improves on the existing LCDs.

It replaces their LED backlights with Mini-LED backlights, which consist of more LEDs that can offer a higher contrast ratio, better uniformity, faster response times, etc.

Mini-LED displays will be cheaper than OLEDs, but not better than them. So, Mini-LED is sort of a display technology in-between the standard LED-backlight LCDs and OLED displays.

The ASUS PG27UQX will feature 2,304 mini LEDs divided into 576 zones (4 LEDs per zone), whereas the original model has 384 zones for local dimming in comparison.

This will significantly alleviate one of the main issues of the PG27UQ, which is image bloom/halo.

When one zone is fully illuminated, but the zones surrounding it are dim, a certain amount of light will bleed from the lit zone to the dim zones, which generates the halo/bloom effect.

Since the PG27UQX has more zones, this issue will be decreased by ~33%. At the same time, the monitor will consume 7% less power and be (relatively) only slightly pricier than the PG27UQ model.

Source: https://www.radiantvisionsystems.com/blog/display-landscape-mini-and-microleds?gclid=EAIaIQobChMItvP3pdvR7gIVqf_ICh1jxwFJEAMYASAAEgL5PPD_BwE

The Display Landscape of Mini- and Micro-LEDs

First there was LED (light emitting diode) display technology, commercialized in 1994. OLED (organic LED) products came on the market in 1997. Then microLEDs began to emerge in 2010. And now we’ve been hearing about a new display technology category: miniLEDs, poised to enter the market in 2019.1

As the name would imply, a miniLED is small—but not as small as a microLED (µLED). While there are no official definitions, microLEDs are typically less than 50 micrometers (µm) square, with most falling in the 3–15 µm size range. Generally, the term miniLED (sometimes also called “sub-millimeter light emitting diodes”) refers to LEDs that are roughly 100 µm square (0.1 mm square), although “mini” can also simply describe any LED between micro and traditional size.

LED landscape as of 2018. Image Source: “MiniLED for Display Applications: LCD and Digital Signage” report by Yole Développement, October 2018.

Though they share many similarities, miniLEDs and microLEDs are also different in some key ways. MicroLEDs are not just shrunken versions of their miniLED sisters. The two LED types have different performance and structures. LEDinside characterized the difference as follows: “Micro LED is a new-generation display technology, a miniaturized LED with matrix. In simple terms, the LED backlight is thinner, miniaturized, and arrayed, with the LED unit smaller than 100 micrometers. Each pixel is individually addressed and driven to emit light (self-emitting), just like OLED…Mini LED is a transitional technology between traditional LED and Micro LED, and is an improved version of traditional LED backlight.”2

Additionally, a driving factor in the recent emergence of miniLEDs is that they are less expensive to produce, largely because current fabrication facilities can more quickly be switched over to miniLED production. MiniLEDs are essentially a variation of already mature LED technology.

MicroLED Fabrication Challenges

MicroLEDs are typically made from Gallium-nitride-based LED materials, which create brighter displays (many times brighter than OLED) with much greater efficiency than traditional LEDs. This makes them attractive for applications that need both brightness and efficiency such as smart watches, and particularly for head-up displays (HUDs) and augmented reality systems that are likely to be viewed against ambient light backgrounds

OLED screen manufacturing has been somewhat costly to date, limiting its adoption primarily to smaller screen sizes like smart phones. Likewise, producing an entire television screen out of microLED chips has so far proven to be challenging. MicroLEDs require new assembly technologies, die structure, and manufacturing infrastructure. For commercialization, fabricators must find methods that yield high quality with microscopic accuracy while also achieving mass-production speeds. For starters, a miniLED backlight screen may be made up of thousands of individual miniLED units; a microLED screen is composed of millions of tiny LEDs.

To fabricate a display, each individual microLED must be transferred to a backplane that holds the array of units in place. The transfer equipment used to place microLED units is required to have a high degree of precision, with placement accurate to within +/- 1.5 µm. Existing pick & place LED assembly equipment can only achieve +/- 34 µm accuracy (multi-chip per transfer). Flip chip bonders typically feature accuracy of +/-1.5 µm—but only for a single unit at a time. Both of these traditional LED transfer methods are not accurate enough for mass production of microLEDs. 

New transfer solutions are under development, including fluid assembly, laser transfer, and roller transfer. Researchers are also working to resolve the challenges associated with integrating compound semiconductor microLEDs with silicon-based integrated circuit devices that have very different material properties and fabrication processes. Traditional chip bonding and wafer bonding processes don’t provide efficient mass transfer for microLED, so various thin-film-transfer technologies are being explored.

Despite Samsung’s introduction of a prototype 75-inch microLED television at the recent CES show (below), microLED products are not expected to reach the general market until 2021.3

Han Jong-hee, president of Samsung Electronics’s video display business, introduces a new 75-inch microLED TV in Las Vegas on January 6, 2019. Photo Source: Business Korea

MiniLED Advantages

By contrast, miniLED chips do not present similar production complications. Because they are just smaller versions of traditional LEDs, they can be manufactured in existing fabrication facilities with minimal reconfiguration. This ease means miniLED production is already underway and devices will reach the market this year for applications in gaming displays and signage, followed by backlight products such as smartphones, TVs, virtual reality devices, and automotive displays.

For example, miniLEDs can be used to upgrade existing LCD displays with “ultra-thin, multi-zone local dimming backlight units (BLU) that enable form factors and contrast performance”4 that rival the quality of OLED displays. MiniLEDs also have an advantage as a cost-effective solution for narrow-pixel-pitch LED direct-view displays such as indoor and outdoor digital signage applications.

MiniLED backlight television from Chinese manufacturer TLC displayed at CES 2019. Photo Source: FlatpanelsHD.

 MicroLEDs do offer high luminous efficiency, brightness, contrast, reliability and a short response time, but they are likely to be priced at more than three times traditional LED screens during initial the initial stages of mass production. MiniLEDs, while they perform more like traditional LEDs, do have advantages when it comes to HDR and notched or curved display designs, and could launch at just 20% above standard LCD panel prices.5 According to PCWorld, “at this stage, the biggest difference between microLED and miniLED for consumers is that microLED is likely to make it to market as a fully-fledged next-generation display technology of its own while miniLED is likely to mostly be used by manufacturers to enhance existing display technologies.”6

Together, microLEDs and miniLEDs are expected to have roughly equal shares of a $1.3 billion market by 2022.7

Quality Assurance for All LED Types

Whether LED or OLED, micro- or mini-, LED display products of all types are jostling for room in a highly competitive marketplace, where customers expect a perfect viewing experience right out of the box. Defects, variations in color or brightness, and other irregularities can quickly deflate buyer satisfaction,  hurt brand reputation, and erode market share.

To ensure the absolute quality of OLED- and LED-based devices, Radiant’s ProMetric® Imaging Photometers and Colorimeters measure display performance and uniformity down to the pixel and subpixel level, matching the acuity and discernment of human visual perception.

CITATIONS:

  1. YiningChen, “Mini LED Applications to be Launched in 2019 and Micro LED Displays in 2021.” LEDinside, October 19, 2018.  LINK
  2. Evangeline H, “Difference between Micro LED and Mini LED.” LEDinside,May 8, 2018. LINK
  3. YiningChen, “Mini LED Applications to be Launched in 2019 and Micro LED Displays in 2021.” LEDinside, October 19, 2018.  LINK
  4. “MiniLED for Display Applications: LCD and Digital Signage” report by Yole Développement, October 2018, as reported in “Mini-LED adoption driven by high-end LCD displays and narrow-pixel-pitch LED direct-view digital signage”. Semiconductor Today, November 28, 2018. LINK
  5. Evangeline H, “Difference between Micro LED and Mini LED.” LEDinside,May 8, 2018. LINK
  6. Halliday, F. “MicroLED vs Mini-LED: What’s the difference?” PCWorld, September 11, 2018. LINK
  7. YiningChen, “Micro LED & Mini LED Market Expects Explosive Business Opportunities, with an Estimated market Value of $1.38 Billion by 2022”. LEDinside (a division of market research company TrendForce), June 20, 2018. LINK

LED TV, QLED TV with QDEF-CF, and QLED TV with QD-CF

Source: Environmentally friendly quantum-dot color filters for ultra-high-definition liquid crystal displays

Source: Samsung Displays – Public Information Display

QLED – Quantum Dot LED

QLED stands for Quantum Dot Light-Emitting Diode, also referred to as quantum dot-enhanced LCD screen. While similar in working principle to conventional LCDs, QLEDs are using the properties of quantum dot particles to advance color purity and improve display efficiency. Quantum dots are integrated with the backlight system of the LCD screen, most commonly with the help of Quantum Dot Enhancement Film (QDEF) that takes place of the diffuser film. Blue LEDs illuminate the film, and quantum dots output the appropriate color, based on their size.

OLED – Organic LED

OLED stands for Organic Light-Emitting Diode, which is self-emitting. Not all OLEDs are using the same tech though. The OLED technology used in phone screens is RGB-OLED, which is completely different from the White OLED (also referred to as W-OLED) used in TVs and large format displays.

RGB-OLED vs. White OLED

RGB-OLEDs use individual sub-pixels emitting red, green, and blue light. RGB-OLEDs yield excellent color reproduction but are unfit for performance requirements of large format displays. With the evolution of materials and a difference in use cases comparing to TVs, RGB-OLED is a preferred technology for the smartphone use.

White OLEDs, in turn, emit white light, which then is passed through a color filter to generate red, green, and blue—similar to how LCDs function. Modern W-OLED color filters use RGBW (red, green, blue, white) structure, adding an additional white sub-pixel to the standard RGB to improve on the power efficiency, enhance brightness, and to mitigate issues with the OLED burn-in. Although having more complex circuit requirements than LCDs (emission is current-driven rather than voltage-driven), W-OLEDs can be utilized for large-scale displays.

QD-OLED vs OLED vs QLED vs Mini LED TVs: What’s the difference?

Deepak SinghFebruary 2, 2021

Quantum Dot OLED TVs are expected to finally go real in 2021. As the name suggests, these TV displays will use Quantum Dot technology to enhance and improve the existing OLED panels. 

How exactly are QD-OLED displays different from current OLED display panels manufactured by LG Displays and from Samsungs existing QLED TVs? The next year will also see a surge in mini LED TVs which will be priced a little below OLED TVs. So let’s compare these different TV technologies to better understand which one is better and why. 

OLED on TVs and OLED on Phones are not the same 

To understand the difference between these display technologies and why they exist, it must first be cleared that the OLED displays on TVs are not the same as OLED displays on phones. 

On your phones, the OLED panels have red, green, and blue subpixels that are self-emissive or emit their own red, green, and blue colors – and can be individually powered on or powered off. 

Making similar OLED panels for large TVs with individual Red, Green and Blue subpixels, however, poses several manufacturing and longevity challenges. In fact, only one such TV was ever launched – the Samsung KE55S9C 55-inch UHD OLED- which was introduced in 2013. 

Samsung KE55S9C 55-inch UHD OLED TV with true RGB colors

The technology wasn’t scalable for larger resolution or bigger displays and thus Samsung shifted to Quantum Dots based QLED technology for its premium TVs. 

Meanwhile, LG Displays developed OLED for TVs where all subpixels are white and not RGB.

The white OLED light is achieved by using Blue and Yellow substrate. Different colors for four sub-pixels (R, G, B, W) are achieved by using a RGBW color filter layer over the essentially white OLED subpixels.  This works because a single color OLED panel is easier to manufacture and decays uniformly – which is to say that your TV will age to be less bright but the backplane light shall still remain uniformly blue or uniformly yellow. 

The color filter film used in front of OLED subpixels, however, is not an ideal solution. The filters work by blocking particular colors of light thus reducing brightness, and as the Blue OLED material decays over time, Red, Green, and Blue colors are affected differentially (the decay is not the same for all three colors resulting in color shifts, burn-in and other issues). 

QD OLED or Quantum Dot OLED TVs aim to fix these issues by using a quantum dots layer for color conversion instead of a color filter.

Also Read: Best 4K TVs to buy in India 

What are Quantum Dots and why they are better than color filters?

Quantum dots are small nanocrystals. When a high-energy light photon strikes quantum dots, they absorb it and emit a new photon. The color of this emitted photon depends on the size of the quantum dot – so manufacturers have to use the same material (just different sizes) for all colors, which makes manufacturing simpler and helps with uniform aging. 

Source: Nanosys

In TVs, Quantum Dots are excited by higher energy or lower wavelength light than the emission color of the dot. To excite green and red color quantum dots, TV manufacturers thus use blue light and for blue subpixels, they let the blue light pass through as-is.

The same result can perhaps be obtained by using blue, red and green quantum dots and exciting them using ultraviolet light.  However, Blue quantum dots are not as easy to develop as green and red (Samsung does have blue Quantum dot technology, but it is not yet being used commercially). 

Quantum dots act as an excellent color converter and have almost 100 percent quantum efficiency. Thus unlike color filters, the Quantum dots layer doesn’t block lights of particular wavelengths or colors and let the entire luminance pass through.

QD-OLED vs OLED: Why QD-OLED displays are better

QD-OLED TV Layers (source: Nanosys)
OLED TV layers

As mentioned above, color conversion in QD-OLED displays is done by quantum dots that are placed or patterned at a sub-pixel level over Blue OLEDs. 

So, we have a blue emissive layer in the backplane where all pixels are blue. And then green and red quantum dot materials are printed on pixels that are needed to be green or red. 

White OLED vs QD -OLED (Source: Nanosys)

Colors are converted on red sub-pixels by red quantum dots and green sub-pixel by green quantum dots. Using this technology, the end result is similar to what you’d get with individual Red, Green, and Blue sub-pixels as with AMOLED displays on phones. 

QD-OLED vs OLED color gamut

Quantum Dots as color converters are highly efficient and way better than color filters that can block up to 60% light. 

Another benefit of this implementation over color filter is that as the Blue OLED lights get dimmer with time, the red and green light getting out of the quantum dots will dim proportionally. 

So, over the lifetime of your TV, its display may get less bright but colors shall remain mostly unaffected. The use of Quantum dot also helps with wider color gamuts with fewer image artifacts, better brightness, and better HDR. 

OLED TVs today use LG Display panels that have a white pixel along with red, green, and blue sub-pixels (and are also referred to as White OLED). This is used for enhancing brightness but reduces color vibrance. Upcoming QD-OLED panels will, in a way, re-instate RGB OLED with deeper, brighter, and more vibrant colors. 

OLED technology is known to have problems with aging, but the current crop of OLED TVs handle this remarkably well. There are negligent chances that users will face issues like OLED burn-ins over a life span of 5 to 8 years. 

Disadvantages of QD-OLED Displays

We discussed a few theoretical advantages of QD OLED above and let’s now talk about some disadvantages of the technology. 

Samsung is currently developing QD OLED panels that we will see in the first wave of QD OLED televisions and they won’t be perfect.

One problem is that Quantum dots on the QD OLED TVs get excited by UV light falling on the TV from the outside. Secondly, Quantum Dot color conversion materials don’t always capture the entire blue light that is used to excite them and some of it may bleed into Red and Green subpixels. 

To counter these problems, Samsung Displays is likely to use some sort of color filter which is likely to be eliminated as we progress to second or third-generation QD-OLED panels. It remains to be seen how much brightness penalty is incurred meanwhile. 

QLED vs QD-OLED: What’s different?
QLED layers

Now that we have discussed how Quantum dots are enhancing existing OLED TVs, you might be wondering how the Quantum Dot technology is implemented on existing Samsung QLED TVs.

Unlike QD-OLED TVs, QLED TVs use Quantum dots as a backplane technology behind the LCD. 

A QLED TV works just like LCD TVs, but a Quantum Dot Enhancement Film( QDEF) is used in front of the Blue LED backlight to convert portions of the blue light to Red and Green in order to get pure White light. This helps enhance brightness and achieve a wider color gamut for better HDR performance.

QLED TVs are better at avoiding the backlight bleed into the display colors as compared to conventional LED or mini LED TVs. Samsung’s high-end QLED models can also get brighter than TV OLED displays. Color conversion is still done using a color filter in front of the LCD module. 

And what about Mini LEDs?

LED TVs don’t have self-emissive pixels and it’s not possible to turn off individual pixels. The LCD substrate merely blocks the white light from the backlight to portray blacks, resulting in slightly greyish blacks more noticeable in dark ambiance. The contrast and black level can however be improved by turning off a portion or zone of the backlight. 

That’s where mini LED TVs come in. These TVs have an array of mini LEDs behind the screen which can be individually turned off for a section of the screen. These mini LEDs don’t map pixels one to one, but having more zones helps with better local dimming control and thus enhances quality over conventional edge-lit LED displays. 

Manufacturers are working on adding quantum dot enhancements to microLED backlighting as well (similar to QD enhancements in QLED TVs). 

When will we see QD OLED TVs? 

Samsung Displays is manufacturing QD-OLED displays but Samsung Electronics isn’t keen on adopting the technology. That’s because Samsung has been marketing QLED as superior to OLED panels for years and transitioning back to OLED or OLED-based TVs will make them lose face. 

QD OLED panels are however being provided to a number of other manufacturers including Sony and we will most probably see QD-OLED TVs in 2021.

QD-BOLED

Source: Inkjet printed uniform quantum dots as color conversion layers for full-color OLED displays

Quantum dots (QDs) have shown great potential for next generation displays owing to their fascinating optoelectronic characteristics. In this work, we present a novel full-color display based on blue organic light emitting diodes (BOLEDs) and patterned red and green QD color conversion layers (CCLs). To enable efficient blue-to-green or blue-to-red photoconversion, micrometer-thick QD films with a uniform surface morphology are obtained by utilizing UV-induced polymerization. The uniform QD layers are directly inkjet printed on red and green color filters to further eliminate the residual blue emissions. Based on this QD-BOLED architecture, a 6.6-inch full-color display with 95% Broadcasting Service Television 2020 (BT.2020) color gamut and wide viewing-angles is successfully demonstrated. The inkjet printing method introduced in this work provides a cost-effective way to extend the applications of QDs for full-color displays.

My Related Posts

Color Science of Gem Stones

Nature’s Fantastical Palette: Color From Structure

Optics of Metallic and Pearlescent Colors

Color Change: In Biology and Smart Pigments Technology

Color and Imaging in Digital Video and Cinema

Digital Color and Imaging

On Luminescence: Fluorescence, Phosphorescence, and Bioluminescence

On Light, Vision, Appearance, Color and Imaging

Key Sources of Research

Light responsive liquid crystal soft matters: structures, properties, and applications

Dae-Yoon Kim & Kwang-Un Jeong

Dae-Yoon Kim & Kwang-Un Jeong (2019)

Liquid Crystals Today, 28:2, 34-45, DOI: 10.1080/1358314X.2019.1653588

https://www.tandfonline.com/doi/pdf/10.1080/1358314X.2019.1653588?needAccess=true

LIQUID CRYSTAL DISPLAY APPLICATIONS: Past, Present & Future

Joseph A Castellano PhD

Liquid Crystals Today, 1:1, 4-6, DOI: 10.1080/13583149108628568

https://www.tandfonline.com/doi/pdf/10.1080/13583149108628568?needAccess=true

The fiftieth anniversary of the liquid crystal display 

J. Cliff Jones

Liquid Crystals Today, 27:3, 44-70, DOI: 10.1080/1358314X.2018.1529129

https://www.tandfonline.com/doi/pdf/10.1080/1358314X.2018.1529129?needAccess=true

Advanced liquid crystal displays with supreme image qualities

Haiwei Chen & Shin-Tson Wu

Liquid Crystals Today, 28:1, 4-11, DOI: 10.1080/1358314X.2019.1625138

https://www.tandfonline.com/doi/pdf/10.1080/1358314X.2019.1625138?needAccess=true

Plenary Lecture. Some pictures of the history of liquid crystals

Hans Kelker  & Peter M. Knoll Pages 19-42 | Published online: 24 Sep 2006

https://www.tandfonline.com/doi/abs/10.1080/02678298908026350?src=recsys

Liquid crystal display and organic light-emitting diode display: present status and future perspectives

Hai-Wei Chen1, Jiun-Haw Lee2, Bo-Yen Lin2, Stanley Chen3 and Shin-Tson Wu1

Light: Science & Applications (2018) 7, 17168; doi:10.1038/lsa.2017.168

https://www.nature.com/articles/lsa2017168.pdf?origin=ppub

Going beyond the limit of an LCD’s color gamut 

Hai-Wei Chen1, Rui-Dong Zhu1, Juan He1, Wei Duan2, Wei Hu2, Yan-Qing Lu2, Ming-Chun Li3, Seok-Lyul Lee3, Ya-Jie Dong1,4 and Shin-Tson Wu1

Light: Science & Applications (2017) 6, e17043; doi:10.1038/lsa.2017.43

https://www.semanticscholar.org/paper/Going-beyond-the-limit-of-an-LCD’s-color-gamut-Chen-Zhu/523719d14139b9a9e8ada8c1599ac9aa8f67c8ec

An overview about monitors colors rendering

January 2010

TOADERE FLORIN, NIKOS E. MASTORAKIS

WSEAS Transactions on Circuits and Systems 9(1)

https://www.researchgate.net/publication/228666667_An_overview_about_monitors_colors_rendering

http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.664.9593&rep=rep1&type=pdf

The History of Liquid-Crystal Displays

HIROHISA KAWAMOTO, FELLOW, IEEE

http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.998.7087&rep=rep1&type=pdf

LCD (Liquid Crystal Display)

https://whatis.techtarget.com/definition/LCD-liquid-crystal-display

What is QLED? Samsung’s quantum dot TV tech explained

By Henry St Leger 

https://www.techradar.com/news/samsung-qled-samsungs-latest-television-acronym-explained

OLED vs QLED: the premium TV panel technologies compared

By Henry St Leger

https://www.techradar.com/news/oled-vs-qled

Liquid Crystals Displays

SCIFUN

http://www.scifun.org/chemweek/LCD/LCDs2019.html

The Liquid Crystal Display (LCD) Technology Turns 50

https://www.corning.com/worldwide/en/innovation/materials-science/glass/liquid-crystal-display-turns-50.html

Color Reproduction Characteristics of Liquid Crystal Display Panels and New Compensation Methods for Them

Yukio Okano* Nozomu Shiotani*

http://cgi.global.sharp/corporate/info/rd/tj3/pdf/9.pdf

COLOR IN DISPLAYS

WOO SUB SHIM

TC 706 COLOR SCIENCE

ADVISOR: DR. RENZO SHAMEY

OCTOBER 28 2008

Color science of nanocrystal quantum dots for lighting and displays

De Gruyter | 2013

https://www.degruyter.com/document/doi/10.1515/nanoph-2012-0031/html

Structural Colors for Display and E-paper Applications

L. Jay Guo

Department of Electrical Engineering and Computer Science The University of Michigan, Ann Arbor, Michigan, USA

https://deepblue.lib.umich.edu/bitstream/handle/2027.42/107993/sdtp00205.pdf;jsessionid=4ECB722ACF8896CFECA475935B750BD0?sequence=1

The Liquid Crystal Display Story

50 Years of Liquid Crystal R&D that lead The Way to the Future

Editors: Koide, Naoyuki (Ed.)

Book 2014

https://www.springer.com/gp/book/9784431548584

Chemistry On Display

Katherine Bourzac, contributor to C&EN

https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4827559/

How Liquid Crystal Displays Work in an eWriter

By Monica Kanojia May 04, 2012

https://www.livescience.com/20104-boogie-board-ewriter-nsf-bts.html

Liquid Crystalline materials used in LCD display

https://madhavuniversity.edu.in/liquid-crystalline-materials.html

Electrophoretic liquid crystal displays: How far are we?

Susanne Klein

HP Laboratories HPL-2013-23

Who will win the future of display technologies?

By Hepeng Jia

National Science Review

5: 427–431, 2018 doi: 10.1093/nsr/nwy050

Advance access publication 23 April 2018

ENERGY EFFICIENT LED DISPLAYS


John Mani Kumar Jupalli

MS Thesis

Univ of Nevada 2010

From the theory of liquid crystals to LCD-displays

Nobel Price in Physics 1991: Pierre-Gilles de Gennes

Alexander Kleinsorge FHI Berlin, Dec. 7th 2004

Quantum Dot Display Technology and Comparison with OLED Display Technology

Askari Mohammad Bagher

Visual gamma correction for LCD displays

Kaida Xiao a,⇑, Chenyang Fu a, Dimosthenis Karatzas b, Sophie Wuerger a

Displays 32 (2011) 17–23

http://www.cvc.uab.es/people/dimos/papers/DISPLAYS2011_Xiao.pdf

Mini-LED, Micro-LED and OLED displays: present status and future perspectives

December 2020

Light: Science & Applications 9(1)

https://www.researchgate.net/publication/342274780_Mini-LED_Micro-LED_and_OLED_displays_present_status_and_future_perspectives

Mini-LED and Micro-LED: Promising Candidates for the Next Generation Display Technology

https://www.researchgate.net/publication/327470132_Mini-LED_and_Micro-LED_Promising_Candidates_for_the_Next_Generation_Display_Technology

Mini-LED, Micro-LED and OLED displays: present status and future perspectives

Yuge Huang, En-Lin Hsiang, Ming-Yang Deng & Shin-Tson Wu

Light: Science & Applications

volume 9, Article number: 105 (2020)

https://www.nature.com/articles/s41377-020-0341-9

https://www.semanticscholar.org/paper/Mini-LED%2C-Micro-LED-and-OLED-displays%3A-present-and-Huang-Hsiang/c6178d60899dc59e927e0c2e3f4336af6aecbe0f

Prospects and challenges of mini‐LED and micro‐LED displays

Yuge Huang Guanjun Tan SID
Fangwang Gou Ming‐Chun Li Seok‐Lyul Lee Shin‐Tson Wu

The Display Landscape of Mini- and MicroLEDs

Mon, January 21, 2019

https://www.radiantvisionsystems.com/blog/display-landscape-mini-and-microleds?gclid=EAIaIQobChMItvP3pdvR7gIVqf_ICh1jxwFJEAMYASAAEgL5PPD_BwE

CHALLENGES AND SOLUTIONS FOR ADVANCED MICROLED DISPLAYS

François Templier
Strategic Marketing, Displays and Displays Systems Optics and Photonics Department

CEA-LETI, Grenoble , France

How to Know the Differences Between an LED Display and LCD Monitor

Zach Cabading|May 11, 2020

https://store.hp.com/us/en/tech-takes/differences-between-led-display-and-lcd-monitor

Colorimetric Characterization of
Three Computer Displays (LCD and CRT)

Jason E. Gibson and Mark D. Fairchild January, 2000

http://www.sgidepot.co.uk/vw/PDFs/Colorimetric_Characterization.pdf

Display Considerations for Improved Night Vision Performance

Allan G. RempelRafał Mantiuk1,2 Wolfgang Heidrich1 1The University of British Columbia, 2Bangor University

Liquid Crystal Display: Environment & Technology Ankita Tyagi1, Dr. S. Chatterjee 2

1Centre for Development of Advanced Computing, New Delhi, India
2 Department of Electronics and Information Technology Ministry of Communication and Information Technology New Delhi, India

http://www.ijestr.org/IJESTR_Vol.%201,%20No.%207,%20July%202013/Liquid%20Crystal%20Display.pdf

A Study on Liquid Crystal Display (LCD) in Optoelectronics

Research Paper (Postgraduate), 2011

https://www.grin.com/document/213415

Color Converting Film With Quantum-Dots for the Liquid Crystal Displays Based on Inkjet Printing

Volume 11, Number 3, June 2019

Bing-Le Huang Tai-Liang Guo Sheng Xu Yun Ye. En-Guo Chen Zhi-Xian Lin

https://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=8692730

Development of Color Resists Containing Novel Dyes for Liquid Crystal Displays

Liquid Crystal Display (LCD)

http://www.madehow.com/Volume-1/Liquid-Crystal-Display-LCD.html

James Fergason, a Pioneer in Advancing of Liquid Crystal Technology

Amelia Carolina Sparavigna

Understand color science to maximize success with LEDs 

https://www.ledsmagazine.com/home/article/16698622/understand-color-science-to-maximize-success-with-leds-magazine

Understand color science to maximize success with LEDs – part 2 

https://www.ledsmagazine.com/smart-lighting-iot/white-point-tuning/article/16695431/understand-color-science-to-maximize-success-with-leds-part-2-magazine

Understand color science to maximize success with LEDs – part 3 

https://www.ledsmagazine.com/smart-lighting-iot/white-point-tuning/article/16695448/understand-color-science-to-maximize-success-with-leds-part-3

Understand color science to maximize success with LEDs – part 4 

https://www.ledsmagazine.com/smart-lighting-iot/white-point-tuning/article/16695085/understand-color-science-to-maximize-success-with-leds-part-4-magazine

Full-color micro-LED display with high color stability using semipolar (20-21) InGaN LEDs and quantum-dot photoresist

High performance color‐converted micro‐LED displays

Fangwang Gou  | En‐Lin Hsiang  | Guanjun Tan  | Yi‐Fen Lan | Cheng‐Yeh Tsai | Shin‐Tson Wu

J Soc Inf Display. 2019;27:199–206.

Plasmonic Metasurfaces with Conjugated Polymers for Flexible Electronic Paper in Color

27 September 2016 https://doi.org/10.1002/adma.201603358

https://onlinelibrary.wiley.com/doi/epdf/10.1002/adma.201603358

Flexible electronic ‘paper’ display color spectrum rivals LED and uses less energy

http://www.chalmers.se/en/departments/chem/news/Pages/Bendable-electronic-paper-shows-full-colour-scale-.aspx

Plasmonic Color Makes a Comeback

ACS Cent. Sci. 2020, 6, 332−335

https://pubs.acs.org/doi/pdf/10.1021/acscentsci.0c00259

https://pubs.acs.org/doi/10.1021/acscentsci.0c00259

Performance of reflective color displays in Out Of Home applications

Etulipa

How Does a Color Changing LED Work

https://www.hunker.com/12000414/how-does-a-color-changing-led-work

The science of colour is upending our relationship with screens

https://www.wired.co.uk/article/project-crayon

Then and Now: The History of Display and LED Technology

Konica Minolta

https://sensing.konicaminolta.us/us/blog/then-and-now-the-history-of-display-and-led-technology/


A Novel RGBW Pixel for LED Displays

Year: 2008, Volume: 1, Pages: 407-411

https://www.computer.org/csdl/proceedings-article/icseng/2008/3331a407/12OmNywfKDb

LED Color Mixing: Basics and Background

Color Part 2:
Color Spaces and Color Perception 

by Roger N. Clark

https://clarkvision.com/articles/color-spaces/

Color Science

Cornell

http://www.cs.cornell.edu/courses/cs4620/2017sp/slides/26color.pdf

High performance color‐converted micro‐LED displays

Fangwang GouEn-Lin Hsiang, +3 authors S. Wu

Published 2019 Journal of The Society for Information Display

https://www.semanticscholar.org/paper/High-performance-color%E2%80%90converted-micro%E2%80%90LED-displays-Gou-Hsiang/b71e36bc6c999877040d88384598c45a8427925c

Choosing a Light and Color Measurement System for LEDs

https://www.radiantvisionsystems.com/learn/articles/choosing-light-and-color-measurement-system-leds

https://www.aerodefensetech.com/component/content/article/tb/pub/features/application-briefs/26901

Color in Electronic Display Systems

Advantages of Multi-primary Displays

Authors: Miller, Michael E.

Book, 2019

https://www.springer.com/gp/book/9783030028336

Color science of nanocrystal quantum dots for lighting and displays

2013

Talha Erdem and Hilmi Volkan Demir

Nanophotonics 2013; 2(1): 57–81

http://repository.bilkent.edu.tr/bitstream/handle/11693/12119/10.1515-nanoph-2012-0031.pdf?sequence=1&isAllowed=y

https://www.researchgate.net/publication/258807123_Color_science_of_nanocrystal_quantum_dots_for_lighting_and_displays

Full-Color Realization of Micro-LED Displays

Yifan Wu, Jianshe Ma, Ping Su, Lijun Zhang and Bizhong Xia

Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen 518055, China

Nanomaterials 2020, 10(12), 2482; https://doi.org/10.3390/nano10122482

https://www.mdpi.com/2079-4991/10/12/2482/htm

Variation of LED Display Color Affected by Chromaticity and Luminance of LED Display Primary Colors

Xinyue Mao, Xifeng Zheng, Ruiguang Wang , Hongbin Cheng,1 and Yu Chen

Hindawi
Mathematical Problems in Engineering Volume 2020, Article ID 1612931, 14 pages

https://doi.org/10.1155/2020/1612931

Full-color micro-LED display with high color stability using semipolar (20-21) InGaN LEDs and quantum-dot photoresist

Vol. 8, No. 5 / May 2020 / Photonics Research

The Display Landscape of Mini- and MicroLEDs

2019 Radiant Visions

https://www.radiantvisionsystems.com/blog/display-landscape-mini-and-microleds?gclid=EAIaIQobChMItvP3pdvR7gIVqf_ICh1jxwFJEAMYASAAEgL5PPD_BwE

Flat screens show their true colors

Innovative pigments from BASF improve television image quality

https://www.basf.com/us/en/media/science-around-us/color-filter.html

THE HISTORY OF LC DISPLAYS

Merck KGaA

https://www.emdgroup.com/en/expertise/displays/solutions/liquid-crystals/history-of-lcd-displays.html

Comparative Evaluation of Color Characterization and Gamut of LCDs versus CRTs

Gaurav Sharma
Xerox Corp., MS0128-27E, 800 Phillips Rd., Webster, NY 14580

http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.299.1580&rep=rep1&type=pdf

Calibrated color mapping between LCD and CRT displays: A case study

  • December 2005
  • Color Research & Application 30(6):438 – 447

DOI: 10.1002/col.20156

https://www.researchgate.net/publication/227604704_Calibrated_color_mapping_between_LCD_and_CRT_displays_A_case_study

Colorimetric characterization of the Apple studio display (Flat panel LCD)

Mark Fairchild David Wyble

The History of Liquid Crystal Display

https://www.thoughtco.com/liquid-crystal-display-history-lcd-1992078

Self-assembled plasmonics for angle-independent structural color displays with actively addressed black states

Daniel Franklin, Ziqian He, Pamela Mastranzo Ortega, Alireza Safaei, Pablo Cencillo-Abad,  Shin-Tson Wu, and Debashis Chanda

PNAS June 16, 2020 117 (24) 13350-13358; first published June 3, 2020; https://doi.org/10.1073/pnas.2001435117

https://www.pnas.org/content/117/24/13350

Liquid Crystals in Displays

MIT Open Course ware

Liquid Crystal Display (LCD)

http://www.madehow.com/Volume-1/Liquid-Crystal-Display-LCD.html

Liquid crystal display and organic light-emitting diode display: present status and future perspectives

Hai-Wei Chen1, Jiun-Haw Lee2, Bo-Yen Lin2, Stanley Chen3 and Shin-Tson Wu1

https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6060049/

Color Converting Film With Quantum-Dots for the Liquid Crystal Displays Based on Inkjet Printing

B. Huang, T. Guo, S. Xu, Y. Ye, E. Chen and Z. Lin,

in IEEE Photonics Journal, vol. 11, no. 3, pp. 1-9, June 2019, Art no. 7000609,

doi: 10.1109/JPHOT.2019.2911308.

https://ieeexplore.ieee.org/document/8692730?denied=

CRT Versus LCD Monitors for Soft Proofifing: Quantitative and Visual Considerations

Chovancova

(2003). Master’s Theses. 4982.


https://scholarworks.wmich.edu/masters_theses/4982

A Color Gamut Description Algorithm for Liquid Crystal Displays in CIELAB Space


Bangyong Sun,1,2 Han Liu,2 Wenli Li,1 and Shisheng Zhou1

Hindawi Publishing Corporation
e Scientific World Journal
Volume 2014, Article ID 671964, 9 pages

http://dx.doi.org/10.1155/2014/671964

https://www.hindawi.com/journals/tswj/2014/671964/

Colour Characterisation of LCD Display Systems

Marjan Vazirian

PhD Thesis

School of Design The University of Leeds

http://etheses.whiterose.ac.uk/20850/1/Marjan_Vazirian_2018.pdf

Camouflaging metamaterials create the LCD color display of the future

The secret: precision placement of plasmonic aluminum nanorods

September 16, 2014

https://www.kurzweilai.net/camouflaging-metamaterials-create-the-lcd-color-display-of-the-future


Vivid, full-color aluminum plasmonic pixels

Jana Olson, Alejandro Manjavacas, Lifei Liu, Wei-Shun Chang, Benjamin Foerster, Nicholas S. King, Mark W. Knight, Peter Nordlander, Naomi J. Halas, and Stephan Link


PNAS first published September 15, 2014; https://doi.org/10.1073/pnas.1415970111

Contributed by Naomi J. Halas, August 19, 2014 (sent for review June 16, 2014)

Who will win the future of display technologies?

By Hepeng Jia

National Science Review 5: 427–431, 2018

doi: 10.1093/nsr/nwy050

Advance access publication 23 April 2018

https://academic.oup.com/nsr/article/5/3/427/4982784

Wide color gamut LCD with a quantum dot backlight

Zhenyue Luo, Yuan Chen, and Shin-Tson Wu

Full-Color Realization of Micro-LED Displays 

by Yifan WuJianshe MaPing Su *Lijun Zhang and Bizhong Xia

Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen 518055, China

Nanomaterials202010(12), 2482; https://doi.org/10.3390/nano10122482

Received: 25 October 2020 / Revised: 23 November 2020 / Accepted: 7 December 2020 / Published: 10 December 2020

https://www.mdpi.com/2079-4991/10/12/2482/htm

Color science of nanocrystal quantum dots for lighting and displays

DOI: 10.1515/nanoph-2012-0031

https://www.researchgate.net/publication/258807123_Color_science_of_nanocrystal_quantum_dots_for_lighting_and_displays

Plasmonic Color Makes a Comeback

The phenomenon behind the earliest photographs is inspiring new research in color printing and displays.

  • Rachel Brazil

ACS Cent. Sci. 2020, 6, 3, 332–335Publication Date:March 16, 2020

https://doi.org/10.1021/acscentsci.0c00259

https://pubs.acs.org/doi/10.1021/acscentsci.0c00259

Plasmonic Metasurfaces with Conjugated Polymers for Flexible Electronic Paper in Color

Kunli Xiong Gustav Emilsson Ali Maziz Xinxin Yang Lei Shao Edwin W. H. Jager. Andreas B. Dahlin

First published: 27 September 2016

 https://doi.org/10.1002/adma.201603358

https://onlinelibrary.wiley.com/doi/epdf/10.1002/adma.201603358

Merck KGaA Germany

https://www.emdgroup.com/en/company.html

Pigments for Color Filters Used in LCDs and OLED Displays(Functional Pigments)

DIC Global

https://www.dic-global.com/en/csr/special/2018/special01.html

Development of Color Resists Containing Novel Dyes for Liquid Crystal Displays

Sumitomo Chemical Co., Ltd.
IT-Related Chemicals Research Laboratory

Masato INOUE Toru ASHIDA

Flat screens show their true colors

BASF

https://www.basf.com/us/en/media/science-around-us/color-filter.html

Color filter-less technology of LED back light for LCD-TV – art. no. 68410G

DOI: 10.1117/12.760045

https://www.researchgate.net/publication/241574165_Color_filter-less_technology_of_LED_back_light_for_LCD-TV_-_art_no_68410G

Synthesis and Characterization of Modified Dyes for Dye-Based LCD Color Filters

Cheol Jun Song , Wang Yao  & Jae Yun Jaung Pages 115-124 | Published online: 16 Dec 2013

Molecular Crystals and Liquid Crystals
Volume 583, 2013 – Issue 1: Proceedings of the Advanced Display Materials and Devices 2012 (ADMD 2012)

https://www.tandfonline.com/doi/abs/10.1080/15421406.2013.852895

A study on the fluorescence property and the solubility of the perylene derivatives and their application on the LCD color filter

Jeong Yun Kim

https://s-space.snu.ac.kr/handle/10371/136759

Synthesis and characterization of novel triazatetrabenzcorrole dyes for LCD color filter and black matrix

JunChoi WoosungLee Jin Woong NamgoongTae-Min KimJae PilKim

Dyes and Pigments
Volume 99, Issue 2, November 2013, Pages 357-365

https://www.sciencedirect.com/science/article/abs/pii/S0143720813001976

HIGH EFFICIENCY AND WIDE COLOR GAMUT LIQUID CRYSTAL DISPLAYS

ZHENYUE LUO

2015 Univ of Central Florida PhD Thesis

http://etd.fcla.edu/CF/CFE0006225/Zhenyue_Luo_Dissertation.pdf

A Simple Filter Could Make LCDs More Efficient

The new approach wastes far less light, saving energy.by 

  • Katherine Bourzac
  • 2010

https://www.technologyreview.com/2010/08/30/200821/a-simple-filter-could-make-lcds-more-efficient/

Past, present, and future of WCG technology in display

Musun Kwak | Younghoon Kim | Sanghun Han | Ahnki Kim | Sooin Kim | Seungbeom Lee | Mike Jun | Inbyeong Kang

Color Team, Panel Performance Division, LG Display, LG Science Park, Seoul, Korea

Musun Kwak, Color Team, Panel Performance Division, LG Display, LG Science Park, Magokjungang, Gangseogu, 10‐ro, Seoul, Korea.
Email: musunkwak@lgdisplay.com

https://onlinelibrary.wiley.com/doi/pdf/10.1002/jsid.843

https://www.toppan.co.jp/electronics/english/display/lcd/structure/

Improving the Color Gamut of a Liquid-crystal Display by Using a Bandpass Filter

Yan Sun1, Chi Zhang1, Yanling Yang1, Hongmei Ma1, and Yubao Sun1,2

Current Optics and Photonics 

ISSN: 2508-7266(Print) / ISSN: 2508-7274(Online) 

Vol. 3, No. 6, December 2019, pp. 590-596

Environmentally friendly quantum-dot color filters for ultra-high-definition liquid crystal displays

Yun-Hyuk Ko, Prem Prabhakaran, Sinil Choi, Gyeong-Ju Kim, Changhee Lee & Kwang-Sup Lee

Scientific Reports volume 10, Article number: 15817 (2020)

https://www.nature.com/articles/s41598-020-72468-8

Color filter technology for liquid crystal displays

Ram W Sabnis

Displays

Volume 20, Issue 3, 29 November 1999, Pages 119-129

https://www.sciencedirect.com/science/article/abs/pii/S014193829900013X

Designs of High Color Purity RGB Color Filter for Liquid Crystal Displays Applications Using Fabry–Perot Etalons

DOI: 10.1109/JDT.2011.2172914

https://www.researchgate.net/publication/239766666_Designs_of_High_Color_Purity_RGB_Color_Filter_for_Liquid_Crystal_Displays_Applications_Using_Fabry-Perot_Etalons

Synthesis of yellow pyridonylazo colorants and their application in dye–pigment hybrid colour filters for liquid crystal display

Jong Min Park, Chang Young Jung, Wang Yao, Cheol Jun Song and Jae Yun Jaung*

Department of Organic and Nano Engineering, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul, 133791, South Korea
Email: jjy1004@hanyang.ac.kr

Received: 9 June 2015; Accepted: 29 September 2015

https://www.researchgate.net/publication/312418853_Synthesis_of_yellow_pyridonylazo_colorants_and_their_application_in_dye-pigment_hybrid_colour_filters_for_liquid_crystal_display

A study on the fluorescence property and the solubility of the perylene derivatives and their application on the LCD color filter

Jeong Yun Kim 2017

https://s-space.snu.ac.kr/handle/10371/136759

Colour filters for LCDs

K.Tsuda

Dai Nippon Printing Co. Ltd, 1-5 Kiyokucho, Kuki City, Saitama Prefecture 346, Japan

Displays

Volume 14, Issue 2, April 1993, Pages 115-124

https://www.sciencedirect.com/science/article/abs/pii/014193829390078J

Liquid crystal display and organic light-emitting diode display: present status and future perspectives

Light: Science & Applications

volume 7, page17168(2018)

https://www.nature.com/articles/lsa2017168

Synthesis and Characterization of Modified Dyes for Dye-Based LCD Color Filters

Cheol Jun Song , Wang Yao  & Jae Yun Jaung Pages 115-124 | Published online: 16 Dec 2013

Molecular Crystals and Liquid Crystals
Volume 583, 2013 – Issue 1: Proceedings of the Advanced Display Materials and Devices 2012 (ADMD 2012)

https://www.tandfonline.com/doi/abs/10.1080/15421406.2013.852895

Textile materials inspired by structural colour in nature

Celina Jones, Franz J. Wortmann, Helen F. Gleeson and Stephen G. Yeatesc

RSC Adv., 2020,10, 24362-24367 

https://pubs.rsc.org/en/content/articlelanding/2020/ra/d0ra01326a#!divAbstract

Structure of Color Filters

Toppan Printing Company Japan

https://www.toppan.co.jp/electronics/english/display/lcd/structure/

Quantum Dot Conversion Layers Through Inkjet Printing

Ernest Lee, Ravi Tangirala, Austin Smith, Amanda Carpenter, Charlie Hotz, Heejae Kim, Jeff Yurek, Takayuki Miki*, Sunao Yoshihara*, Takeo Kizaki*, Aya Ishizuka*, Ikuro Kiyoto*

Nanosys, Inc., Milpitas, CA

*DIC Corporation, Sakura, Chiba, JAPAN

https://www.nanosysinc.com/white-papers/2018/11/28/quantum-dot-conversion-layers-through-inkjet-printing

Colors with plasmonic nanostructures: A full-spectrum review 

Applied Physics Reviews 6, 041308 (2019); https://doi.org/10.1063/1.5110051

Maowen Song1,2 Di Wang1 Samuel Peana1Sajid Choudhury1 Piotr Nyga1,3Zhaxylyk A. Kudyshev1Honglin Yu2Alexandra Boltasseva1Vladimir M. Shalaev1, and Alexander V. Kildishev1,a)

https://aip.scitation.org/doi/pdf/10.1063/1.5110051

Transmissive/Reflective structural color filters: theory and applications

Journal of Nanomaterials January 2014  Article No.: 6 

https://doi.org/10.1155/2014/212637

https://dl.acm.org/doi/abs/10.1155/2014/212637

Review of nanostructure color filters Felix Gildas and Yaping Dan*

University of Michigan–Shanghai Jiao Tong University Joint Institute, Shanghai, China

J. Nanophoton. 13(2), 020901 (2019), doi: 10.1117/1.JNP.13.020901.

http://yapingd.sjtu.edu.cn/upload/editor/file/20190708/20190708084242_36263.pdf

Nanostructured Color Filters: A Review of Recent Developments

Ayesha Shaukat,1,2Frazer Noble,1 and  Khalid Mahmood Arif1,*

Nanomaterials (Basel). 2020 Aug; 10(8): 1554.

https://www.ncbi.nlm.nih.gov/pmc/articles/PMC7466596/

Bright and Vivid Diffractive-Plasmonic Structural Colors

https://pubs.acs.org/doi/10.1021/acsanm.9b02508

Transmissive metamaterial color filters

Yoshiaki Kanamori, Daisuke Ema, and Kazuhiro Hane

JSAP-OSA Joint Symposia 2017 Abstracts(Optical Society of America, 2017),paper 5p_A410_5

https://www.osapublishing.org/abstract.cfm?uri=JSAP-2017-5p_A410_5

Three-terminal RGB full-color OLED pixels for ultrahigh density displays

Scientific Reports volume 8, Article number: 9684 (2018) 

https://www.nature.com/articles/s41598-018-27976-z

Application organic pigment for color filter of LCD

Emperor Chemicals China

https://pigmentpigment.com/news/application-organic-pigment-for-color-filter-of-lcd–9.html

Liquid-crystal tunable color filters based on aluminum metasurfaces

Zu-Wen Xie, Jhen-Hong Yang, Vishal Vashistha, Wei Lee, and Kuo-Ping Chen

Optics ExpressVol. 25,Issue 24,pp. 30764-30770(2017)

Preparation of Colour Filter Photo Resists for Improving Colour Purity in Liquid Crystal Displays by Synthesis of Polymeric Binder
and Treatment of Pigments

Chun Yoonand Jae-hong Choi

Department ofChemistry, Sejong University, Seoul 143-747, Korea. *E-mail: chuny@sejong.ac.kr ‘Department of Textile System Engineering, Kyungpook National University, Daegu 702-701, Korea Received May 04, 2009, Accepted July 03, 2009

Bull. Korean Chem. Soc. 2009, Vol. 30, No. 8

THE SCIENCE OF COLOR AND LIGHT

By Michael Cassera 9. June 2020

https://newsandviews.dataton.com/the-science-of-color-and-light

Image Display Technology

http://www.marcelpatek.com/LCD.html

Past, present, and future of WCG technology in display

Musun Kwak Younghoon Kim Sanghun Han Ahnki Kim Sooin Kim Seungbeom Lee Mike Jun Inbyeong Kang

 First published: 02 October 2019 

Volume27, Issue11 November 2019. Pages 691-699

https://onlinelibrary.wiley.com/doi/full/10.1002/jsid.843

Panel Technologies

Simon Baker, updated  17 March 2015

https://www.tftcentral.co.uk/articles/panel_technologies.htm

https://www.tftcentral.co.uk/articles/panel_technologies.htm

LED Backlighting

Simon Baker, 11 November 2010

https://www.tftcentral.co.uk/articles/led_backlighting.htm

The Evolution of LED Backlights

Author: Adam Simmons
Last updated: February 8th 2021

PCmonitors.info

OLED Production: Composition and Color Patterning Techniques

Last updated on January 22, 2020

https://www.findlight.net/blog/2020/01/22/oled-production-composition-and-color-patterning-techniques/

OLED Color Patterning Technologies

Book Author(s): Takatoshi TsujimuraFirst published: 04 March 2017 

OLED Display Fundamentals and Applications, Second Edition

https://onlinelibrary.wiley.com/doi/pdf/10.1002/9781119187493.ch5

OLED Technologies

Tohoku Pioneer Corporation

https://global.pioneer/en/corp/group/tohokupioneer/mainbusinesses/oled/introduction/

Directly Patterened 2645 PPI Full Color OLED Microdisplay for Head Mounted Wearables

DOI: 10.1002/sdtp.10805

https://www.researchgate.net/publication/303535486_62-1_Invited_Paper_Directly_Patterened_2645_PPI_Full_Color_OLED_Microdisplay_for_Head_Mounted_Wearables

The Progress of QD Color Filters

https://avantama.com/the-progress-of-qd-color-filters/

19.2: Color Filter Formulations for Full‐Color OLED Displays: High Color Gamut Plus Improved Efficiency and Lifetime

Margaret J. HelberPaula J. AlessiMitchell BurberrySteven EvansM. Christine BrickDonald R. DiehlRonald Cok

SID

First published: 05 July 2012 https://doi.org/10.1889/1.2785479

https://onlinelibrary.wiley.com/doi/pdf/10.1889/1.2785479

Can OLED displays be brighter?

Structure of Color Filters

Toyo Visual

https://www.toyo-visual.com/en/products/fpdcf/colorfilter.html

QLED vs. W-OLED: TV Display Technology Shoot-Out

Samsung Display

https://pid.samsungdisplay.com/en/printpdf/learning-center/blog/qled-vs-oled-tv-display-technology

Thin-film transistor-driven vertically stacked full- color organic light-emitting diodes for high- resolution active-matrix displays

Sukyung Choi 1, Chan-mo Kang1, Chun-Won Byun1, Hyunsu Cho1, Byoung-Hwa Kwon1, Jun-Han Han1, Jong-Heon Yang1, Jin-Wook Shin1, Chi-Sun Hwang 1, Nam Sung Cho1, Kang Me Lee1, Hee-Ok Kim1, Eungjun Kim2, Seunghyup Yoo2 & Hyunkoo Lee

Nat Commun. 2020; 11: 2732. Published online 2020 Jun 1.

doi: 10.1038/s41467-020-16551-8

https://www.ncbi.nlm.nih.gov/pmc/articles/PMC7264127/

QD-OLED vs OLED vs QLED vs Mini LED TVs: What’s the difference?

By Deepak Singh – Updated On 

Inkjet printed uniform quantum dots as color conversion layers for full-color OLED displays

Zhiping Hu,*abYongming Yin,  abMuhammad Umair Ali,  cWenxiang Peng,bShijie Zhang,bDongze Li,bTaoyu Zou,aYuanyuan Li,bShibo Jiao,bShu-jhih Chen,bChia-Yu Lee,bHong Menga  and  Hang Zhou

Nanoscale, 2020,12, 2103-2110 

https://pubs.rsc.org/en/content/articlelanding/2020/nr/c9nr09086j#!divAbstract

Understand RGB LED mixing ratios to realize optimal color in signs and displays

https://www.ledsmagazine.com/smart-lighting-iot/color-tuning/article/16695054/understand-rgb-led-mixing-ratios-to-realize-optimal-color-in-signs-and-displays-magazine

Mini-LED vs MicroLED – What Is The Difference?

BY ROB SHAFER OCTOBER 1, 2020

https://www.displayninja.com/mini-led-vs-microled/

The Progress of QD Color Filters

https://avantama.com/the-progress-of-qd-color-filters/

What are the different types of RGB LEDs?

https://www.lighting.philips.com/main/support/support/faqs/white-light-and-colour/what-are-the-different-types-of-rgb-leds

OLED Production: Composition and Color Patterning Techniques

https://www.findlight.net/blog/2020/01/22/oled-production-composition-and-color-patterning-techniques/

OLED Color Patterning Technologies

Book Author(s): Takatoshi Tsujimura

First published: 04 March 2017 

OLED Display Fundamentals and Applications, Second Edition

Can OLED display be brighter?

Structure of Color Filters

https://www.toyo-visual.com/en/products/fpdcf/colorfilter.html

QD-OLED vs OLED vs QLED vs Mini LED TVs: What’s the difference?

By Deepak Singh – Updated On 

Liquid crystal display and organic light-emitting diode display: present status and future perspectives

Hai-Wei Chen1, Jiun-Haw Lee2, Bo-Yen Lin2, Stanley Chen3 and Shin-Tson Wu1

Light: Science & Applications (2018) 7, 17168; doi:10.1038/lsa.2017.168

Beyond OLED: Efficient Quantum Dot Light-Emitting Diodes for Display and Lighting Application

Yizhe Sun 1 2Yibin Jiang 2 3Xiao Wei Sun 2Shengdong Zhang 1Shuming Chen 2

https://pubmed.ncbi.nlm.nih.gov/30698895/

Full-Color Realization of Micro-LED Displays

Yifan Wu 1Jianshe Ma 1Ping Su 1Lijun Zhang 1Bizhong Xia 1

Nanomaterials (Basel)
. 2020 Dec 10;10(12):2482.

doi: 10.3390/nano10122482.

https://pubmed.ncbi.nlm.nih.gov/33322057/

Color Converting Film With Quantum-Dots for the Liquid Crystal Displays Based on Inkjet Printing

Volume 11, Number 3, June 2019
IEEE Photonics Journal 

Bing-Le Huang Tai-Liang Guo Sheng Xu Yun Ye. En-Guo Chen Zhi-Xian Lin

https://ieeexplore.ieee.org/document/8692730?denied=

Who will win the future of display technologies?

By Hepeng Jia

National Science Review. 5: 427–431, 2018

doi: 10.1093/nsr/nwy050

https://academic.oup.com/nsr/article/5/3/427/4982784

Wide color gamut LCD with a quantum dot backlight

Zhenyue Luo, Yuan Chen, and Shin-Tson Wu

Optics Express > Volume 21 > Issue 22 > Page 26269

Prospects and challenges of mini‐LED and micro‐LED displays

Yuge Huang | Guanjun Tan | Fangwang Gou | Ming‐Chun Li2 | Seok‐Lyul Lee | Shin‐Tson Wu

J Soc Inf Display. 2019;27:387–401.

Full-color micro-LED display with high color stability using semipolar (20-21) InGaN LEDs and quantum-dot photoresist

Sung-Wen Huang Chen, Yu-Ming Huang, Konthoujam James Singh, Yu-Chien Hsu, Fang-Jyun Liou, Jie Song, Joowon Choi, Po-Tsung Lee, Chien-Chung Lin, Zhong Chen, Jung Han, Tingzhu Wu, and Hao-Chung Kuo

Photonics Research > Volume 8 > Issue 5 > Page 630

Full-Color Realization of Micro-LED Displays

by Yifan Wu, Jianshe Ma, Ping Su *OrcID, Lijun Zhang and Bizhong Xia

Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen 518055, China

Nanomaterials 2020, 10(12), 2482; https://doi.org/10.3390/nano10122482

https://www.mdpi.com/2079-4991/10/12/2482/htm

Color science of nanocrystal quantum dots for lighting and displays

February 2013. Nanophotonics 2(1):57-81
DOI: 10.1515/nanoph-2012-0031

Project: Colloidal organic and inorganic nanoparticles for lighting and displays

https://www.researchgate.net/publication/258807123_Color_science_of_nanocrystal_quantum_dots_for_lighting_and_displays

High performance color‐converted micro‐LED display

Fangwang Gou | En‐Lin Hsiang  | Guanjun Tan  | Yi‐Fen Lan | Cheng‐Yeh Tsai | Shin‐Tson Wu

QD-OLED

https://www.oled-info.com/qd-oled

Environmentally friendly quantum-dot color filters for ultra-high-definition liquid crystal displays

Scientific Reports volume 10, Article number: 15817 (2020)

https://www.nature.com/articles/s41598-020-72468-8

Color filter technology for liquid crystal displays

Ram W Sabnis

Displays
Volume 20, Issue 3, 29 November 1999, Pages 119-129

https://www.sciencedirect.com/science/article/abs/pii/S014193829900013X

Stretchable and reflective displays: materials, technologies and strategies

Do Yoon Kim, Mi-Ji Kim, Gimin Sung & Jeong-Yun Sun

Nano Convergence volume 6, Article number: 21 (2019)

https://nanoconvergencejournal.springeropen.com/articles/10.1186/s40580-019-0190-5

LTPS LCD

https://www.pcmag.com/encyclopedia/term/ltps-lcd

LCD Basics

https://www.j-display.com/english/technology/lcdbasic.html

Characterization of TFT and LTPS TFT-LCD Display Panels by Spectroscopic Ellipsometry

https://www.horiba.com/en_en/applications/information-technology/semiconductors/display-technologies/characterization-of-tft-and-ltps-tft-lcd-display-panels-by-spectroscopic-ellipsometry/

Display technology explained: A-Si, LTPS, amorphous IGZO, and beyond

LTPS Process

AUO

https://auo.com/en-global/TFT-LCD_Introduction/index/LTPS_TFT_LCD

What Is An LTPS LCD?

https://www.electronicsforu.com/technology-trends/learn-electronics/ltps-lcd

Mini-LED vs MicroLED – What Is The Difference?

BY ROB SHAFER. OCTOBER 1, 2020

https://www.displayninja.com/mini-led-vs-microled/

LIQUID CRYSTAL DISPLAY APPLICATIONS Past, Present & Future

by Joseph A Castellano, PhD Stanford Resources Inc.
PO Box 20324, San Jose, CA 95160

https://www.tandfonline.com/doi/pdf/10.1080/13583149108628568?needAccess=true

The fiftieth anniversary of the liquid crystal display,

J. Cliff Jones (2018)

Liquid Crystals Today, 27:3, 44-70,

DOI: 10.1080/1358314X.2018.1529129

https://www.tandfonline.com/doi/pdf/10.1080/1358314X.2018.1529129?needAccess=true

Plenary Lecture. Some pictures of the history of liquid crystals, 

Hans Kelker & Peter M. Knoll (1989) 

Liquid Crystals, 5:1, 19-42, DOI: 10.1080/02678298908026350

Liquid crystal display and organic light-emitting diode display: present status and future perspectives

Hai-Wei Chen1, Jiun-Haw Lee2, Bo-Yen Lin2, Stanley Chen3 and Shin-Tson Wu1

Light: Science & Applications (2018) 7, 17168; doi:10.1038/lsa.2017.168; 

https://www.nature.com/articles/lsa2017168.pdf?origin=ppub

An overview about monitors colors rendering

https://www.researchgate.net/publication/228666667_An_overview_about_monitors_colors_rendering

The History of Liquid-Crystal Displays

HIROHISA KAWAMOTO, FELLOW, IEEE

http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.998.7087&rep=rep1&type=pdf

From the theory of liquid crystals to LCD-displays

Nobel Price in Physics 1991: Pierre-Gilles de Gennes

Alexander Kleinsorge FHI Berlin, Dec. 7th 2004

Mini-LED, Micro-LED and OLED displays: present status and future perspectives

Light: Science & Applications volume 9, Article number: 105 (2020) 

https://www.nature.com/articles/s41377-020-0341-9

OLED vs QLED: the premium TV panel technologies compared

https://www.techradar.com/news/oled-vs-qled

The Liquid Crystal Display (LCD) Technology Turns 50

https://www.corning.com/worldwide/en/innovation/materials-science/glass/liquid-crystal-display-turns-50.html

COLOR IN DISPLAYS

The Liquid Crystal Display Story

50 Years of Liquid Crystal R&D that lead The Way to the Future

Editors: Koide, Naoyuki (Ed.)

2014

https://www.springer.com/gp/book/9784431548584

Chemistry On Display

Katherine Bourzac, contributor to C&EN

Mini-LED, Micro-LED and OLED displays: present status and future perspectives

DOI: 10.1038/s41377-020-0341-9

https://www.researchgate.net/publication/342274780_Mini-LED_Micro-LED_and_OLED_displays_present_status_and_future_perspectives

Mini-LED and Micro-LED: Promising Candidates for the Next Generation Display Technology

DOI: 10.3390/app8091557

https://www.researchgate.net/publication/327470132_Mini-LED_and_Micro-LED_Promising_Candidates_for_the_Next_Generation_Display_Technology

CHALLENGES AND SOLUTIONS FOR ADVANCED MICROLED DISPLAYS

François Templier
Strategic Marketing, Displays and Displays Systems Optics and Photonics Department

CEA-LETI, Grenoble , France

Three-terminal RGB full-color OLED pixels for ultrahigh density displays

Scientific Reports volume 8, Article number: 9684 (2018)

https://www.nature.com/articles/s41598-018-27976-z

Past, present, and future of WCG technology in display

Musun KwakYounghoon KimSanghun HanAhnki KimSooin Kim… See all authors 

First published: 02 October 2019

 https://doi.org/10.1002/jsid.843

https://onlinelibrary.wiley.com/doi/full/10.1002/jsid.843

Thin-film transistor-driven vertically stacked full-color organic light-emitting diodes for high-resolution active-matrix displays

Sukyung Choi,1Chan-mo Kang,1Chun-Won Byun,1Hyunsu Cho,1Byoung-Hwa Kwon,1Jun-Han Han,1Jong-Heon Yang,1Jin-Wook Shin,1Chi-Sun Hwang,1Nam Sung Cho,1Kang Me Lee,1Hee-Ok Kim,1Eungjun Kim,2Seunghyup Yoo,2 and  Hyunkoo Lee1,3

Nat Commun. 2020; 11: 2732. Published online 2020 Jun 1. 

doi: 10.1038/s41467-020-16551-8

https://www.ncbi.nlm.nih.gov/pmc/articles/PMC7264127/

Realizing Rec. 2020 color gamut with quantum dot displays

Ruidong Zhu,1 Zhenyue Luo,1 Haiwei Chen,1 Yajie Dong,1,2 and Shin-Tson Wu1,*

1CREOL, The College of Optics and Photonics, University of Central Florida, Orlando, Florida 32816, USA 2NanoScience Technology Center, University of Central Florida, Orlando, Florida 32826, USA

Full-color micro-LED display with high color stability using semipolar (20-21) InGaN LEDs and quantum-dot photoresist

SUNG-WEN HUANG CHEN,1 YU-MING HUANG,1,2 KONTHOUJAM JAMES SINGH,1 YU-CHIEN HSU,1 FANG-JYUN LIOU,1 JIE SONG,3 JOOWON CHOI,3 PO-TSUNG LEE,1 CHIEN-CHUNG LIN,2
ZHONG CHEN,4 JUNG HAN,5 TINGZHU WU,4,6 AND HAO-CHUNG KUO1,7

Vol. 8, No. 5 / May 2020 / Photonics Research

Nature’s Fantastical Palette: Color From Structure

Nature’s Fantastical Palette: Color From Structure

Peacock Feathers

Source: STRUCTURAL COLORATION IN NATURE

Key Terms

  • Iridescence
  • Nanostructures
  • Color from Pigments
  • Color from Structures
  • Smart Pigments
  • Material Science
  • Color from Bioluminescence
  • Color Change
  • Photonics
  • Biomimicry
  • Non Iridescent Colors
  • Iridescent Colors
  • Photonic Crystals (PhC)
  • Diffraction Grating
  • Specular Reflection
  • Braggs Diffraction
  • 1D Grating
  • 2D and 3D Photonic Crystals
  • Optical Nanotechnology
  • Multilayer Filters
  • Biomimetics
  • Peacock
  • Morpho Butterflies
  • Interference
  • Colloidal Crystals
  • Colloidal Amorphous Array
  • Microfluidics
  • Photonic Pigments
  • Reflective Displays (E-Ink)
  • Colloidal Assembly
  • Photonic Glass (PG)
  • Plasmonic Films
  • Inverse-Opals
  • Braggs Stacks
  • Dielectric Structural Colors
  • Plasmonic Structural Colors
  • Amorphous Photonic Structures
  • Melanin
  • Dopamine
  • Poly Dopamine
  • Plasmonic Metasurfaces

Source: GOLD BUGS AND BEYOND: A REVIEW OF IRIDESCENCE AND STRUCTURAL COLOUR MECHANISMS IN BEETLES (COLEOPTERA)

Source: GOLD BUGS AND BEYOND: A REVIEW OF IRIDESCENCE AND STRUCTURAL COLOUR MECHANISMS IN BEETLES (COLEOPTERA)

Source: Structural color and its interaction with other color-producing elements: perspectives from spiders

Color Vision

Source: Structural Color and Odors: Towards a Photonic Crystal Nose Platform

Color Sources

  • From Pigments
  • From Bioluminescenece
  • From Structure

Source: Chromic Phenomena: Technological Applications of Colour Chemistry

Source: Chromic Phenomena: Technological Applications of Colour Chemistry

Structural Color in Nature

  • Peacock
  • Butterflies
  • Beetles
  • Parrots
  • Birds
  • Moth

Peacock Colors

Feathers of Peacock

Source: Structural colors: from natural to artificial systems

Colors of Marpho Butterfly

Closeup of Marpho Butterfly

Structure and Color

  • Iridescent – (Colloidal Crystals)- Angle Dependent – Regular Structure
  • Non Iridescent – (Colloidal Amorphous Arrays) – Angle Independent – Irregular Structure

Optics of Structural Colors

  • Interference
  • Diffraction Gratings
  • Scattering
  • Reflection

Nano Structures Responsible for Colors

Source: Structural color and its interaction with other color-producing elements: perspectives from spiders

  • Christmas Tree
  • Multilayer – 1 D Periodicity
  • Photonic Crystals – 2 D and 3 D
  • Diffraction Grating
  • Quasi Ordered Photonic Crystal
  • Disorder Structure

Source: BIO-INSPIRED VARIABLE STRUCTURAL COLOR MATERIALS

  • 1 D Gratings
  • 1 D Periodicity Multilayers
  • 1 D Discrete Periodicity
  • 2 D Gratings
  • 2 D Periodicity
  • Closed Packed Spheres of Solid Materials
  • Inverse Opal Analogoues

Source: STRUCTURAL COLORATION IN NATURE

  • Thin Film Interference
  • Multi Film Interference
  • Diffraction Gratings
  • Coherent Scattering
  • Incoherent Scattering
  • 1 D Photonic Crystals
  • 2 D Photonic Crystals
  • 3 D Photonic Crystals

Source: Structural Color and Odors: Towards a Photonic Crystal Nose Platform

Source: PHYSICS OF STRUCTURAL COLORS

Source: PHOTOPHYSICS OF STRUCTURAL COLOR IN THE MORPHO BUTTERFLIES

Source: Gold bugs and beyond: a review of iridescence and structural colour mechanisms in beetles (Coleoptera)

  • Cuticular Multilayer Reflector
  • Epicuticular Reflector
  • Exocuticular Reflector
  • Endocuticular Reflector

Source: Gold bugs and beyond: a review of iridescence and structural colour mechanisms in beetles (Coleoptera)

  • Multilayer Reflectors
  • Diffraction Gratings
  • 3 D Photonic Crystals

Multilayer reflectors in beetles have also been described as ‘thin-layer stacks’, ‘one-dimensional photonic crystals’ and ‘thin-film reflectors’ (e.g. Parker 1998, 2002; Vigneron et al. 2006). The vocabulary used to describe these structures is somewhat dispersive, as the variously intersecting disciplines of entomology, physics and applied optics (e.g. laser technology, fibre-optic data transmission, telescopes and microscopy) have all developed slightly different suites of terminology. Other synonyms for ‘multilayer reflector’ include multilayer stack, quarter wave stack, interference reflector and dielectric mirror.

We propose that the term multilayer reflector be applied to such structures in Coleoptera; this describes the multilayered nature of cuticular chitin lamellae (which are not true films) and the reflective mechanism by which colour is produced.

The terms ‘metallic colours’ or ‘metallic iridescence’ can be used to distinguish multilayer effects from those produced by other optical structures. Multilayer reflectance can typically be diagnosed as such by its limited palette (usually one or two apparent hues per reflector), blue shift with decreased observation angle and fixed position on the cuticle surface.

Source: Gold bugs and beyond: a review of iridescence and structural colour mechanisms in beetles (Coleoptera)

Three-dimensional crystalline structures producing scintillating, gem-like reflectance were described by Parker et al. (2003) in the entimine weevil Metapocyrtus sp. (initially misidentified as Pachyrrhynchus argus); by Welch et al. (2007) in Pachyrrhynchus congestus, and recently in another entimine weevil, Lamprocyphus augustus, by Galusha et al. (2008). The photonic crystals found in the scales of pachyrrhynchine weevils (Pachyrrhynchus and Metapocyrtus) have a close-packed hexagonal arrangement analogous to (mineral) opal, while the photonic crystal of Lamprocyphus has a diamond-based lattice (i.e. a face-centred cubic system rather than a hexagonal one).

Although the term ‘photonic crystal’ applies to any ordered subwavelength structure that affects the propagation of specific wavelengths of light (Parker & Townley 2007), it is the three-dimensionally ordered structures to which the term is most commonly applied. We recommend use of the term ‘three-dimensional photonic crystal’, which distinguishes these structures from the one-dimensional periodicity of multilayer reflectors or Bragg gratings. The terms ‘opal’ and ‘diamond based’ have been used to describe iridescence in weevil scales, but refer to phenomena that are relatively similar from an organismal perspective; it is important to note that these terms refer to crystalline lattice morphology and not the appearance of the scales themselves. Maldovan & Thomas (2004) provided an excellent overview of diamond-based lattice morphology (as observed in Lamprocyphus) in photonic crystals; Yablonovitch (1993) provided a thorough introduction to the photonic band-gap mechanism by which colours are produced in three-dimensional photonic crystals.

Source: Gold bugs and beyond: a review of iridescence and structural colour mechanisms in beetles (Coleoptera)

A diffraction grating is any nanoscale array of parallel ridges or slits that disperses white light into its constituent wavelengths (figure 8a shows a grating in cross section). Because white light consists of many different wavelengths, it diffracts into full spectra, creating the rainbow-like reflectance shown in figures 1a,b, 8c and 9b,d. While man-made diffraction gratings can disperse light via reflection or transmission, all beetle gratings are strictly reflection mechanisms.

Source: Gold bugs and beyond: a review of iridescence and structural colour mechanisms in beetles (Coleoptera)

http://photobiology.info/Ball.html

Nature’s Fantastical Palette: Color from Structure

Philip Ball
18 Hillcourt Road
East Dulwich
London SE22 0PE, UK
p.ball@btinternet.com

The changing hues of a peacock’s splendid tail feathers have always captivated the curious mind (Figure 1). The seventeenth-century English scientist Robert Hooke called them ‘fantastical’ because the colors could be made to disappear by wetting the feathers (Hooke, 1665). Using the newly invented microscope, Hooke looked at peacock feathers and saw that they were covered with tiny ridges, which he figured might be the origin of the colors. 

Figure 1

Figure 1. The shifting colors of the peacock’s tail have had metaphorical interpretations for centuries.

Hooke was on the right track. The bright, often iridescent colors of bird plumage, insect cuticle and butterfly wings are ‘structural’; produced not by light absorption by pigments, but light scattering from a regular array of objects just a few hundreds of nanometers (millionths of a millimeter) in size (Vukusic & Sambles, 2003; Vukusic, 2004; Wolpert, 2009). This scattering favors particular wavelengths depending on the size and spacing of the scatterers, and so it picks out specific colors from the full spectrum of sunlight. Because the precise hue may depend also on the viewing angle, structural colors are often iridescent, changing from blue to green or orange to yellow. And because they involve reflection rather than absorption, these colors can be startlingly brilliant. The Blue Morpho butterflies of South and Central America are visible from a quarter of a mile away, seeming almost to shine when sunlight penetrates the tropical forest canopy and bounces off their wings. 

Structural colors are just one example of how living organisms manipulate and channel light using delicately arranged micro- and nanostructures. These biological designs offer inspiration to engineers seeking to control light in optical technologies, and could lead to more brilliant visual displays, new chemical sensors, and better storage, transmission and processing of information. To make effective use of such tricks, we need to understand how nature creates and deploys these tiny optical structures; indeed, we must learn a new language of color production and mixing. 

Rather little is known about how many of these biological structures are put together, how they evolved, and how evolution has made creative use of the color and light effects they offer. But one thing is clear; nature doesn’t have the sophisticated patterning technologies, such as drilling with electron beams, that microengineers can use to laboriously carve such structures from solid blocks. Ingenuity is used instead of finesse; these biological structures must make themselves from the component parts. 

If we can master that art, we might develop new, cheap technologies to make such things as materials that change color or appearance, like the camouflage skins of some fish and squid, or fibres that guide and channel light with virtually no leakage, or chemically controlled light shutters. Here I look at some of nature’s tricks for turning structure into color; and the ways they are being exploited in artificial materials and devices (Ball, 2012). 

Layers

Although the ridges seen by Hooke on butterfly wing scales do scatter light, the bright colors of the reflected light generally come from invisible structures beneath the surface. In the natural world, they offer a robust way of generating color that is not hostage to the fate of delicate, light-sensitive organic pigments. 

The colored scales and feathers of birds, fish and butterflies typically contain organized microscopic layers or rods of a dense light-scattering material embedded in a matrix of a different substance. Because the distance between the scatterers is roughly the same as the wavelengths of visible light, the stacks cause the wave phenomenon of diffraction, in which reflected waves interfere with one another. Depending on the angle of reflection, light rays of a certain wavelength interfere constructively when they bounce off successive layers in the stack, boosting the corresponding color in the reflected light (Vukusic and Sambles, 2003; Vukusic, 2004; Wolpert, 2009). It is much the same process that elicits the chromatic spectrum in light glancing off a tilted CD. 

In butterfly wing scales the reflecting stacks are made of cuticle; a hard material containing the natural polymer chitin, separated by air-filled voids. In bird feathers, the stacks are platelets or rods of the dark pigment melanin; sometimes hollow, as in the Black Inca hummingbird, Coeligena prunellei, embedded in keratin, the protein from which our hair and fingernails are made (Figure 2). Analogous diffraction gratings made from alternating ultrathin layers of two materials are widely used in optical technologies to select and reflect light of a single color. For example, mirrors made from multiple layers of semiconductors are used as reflectors and color filters in devices ranging from astronomical telescopes to solid-state lasers and spectrometers. 

Figure 2

Figure 2. The iridescent blues and greens in the feathers of hummingbirds such as this Black Inca (left; part of blue iridescence highlighted with white box) are created by platelets of melanin pigment punctuated with air holes (right), which act as a photonic crystal to reflect light of a particular wavelength. K=keratin, A=air, M=melanin. (From Shawkey et al., 2009)

The male bird of paradise Lawes’ parotia (Parotia lawesii) has a particularly neat twist on this trick (Figure 3). The barbules (hair-like structures on the feather barbs) of its breast feathers contain layers of melanin spaced at a distance that creates bright orange-yellow reflection. But, as Stavenga and colleagues have recently discovered, each barbule has a V-shaped or boomerang cross-section, with sloping surfaces that also act as reflectors of blue light (Stavenga et al., 2011). Slight movements of the feathers during the bird’s courtship ritual can switch the color abruptly between yellow-orange and blue-green; guaranteed to catch a female’s eye. Stavenga suspects that technologists will want to use this trick for producing dramatic chromatic shifts. “I suspect the fashion or automobile industries will in due time make bent structures or flakes that will exploit these angular color changes”, he says. 

Figure 3a
Figure 3b

Figure 3. A striking color change in the feathers of the male Lawes’ parotia, from yellow-orange (a) to blue-green (b), is caused by the presence of two mirror-like reflectors in the feather barbules (c): layers of melanin rods reflect yellow light, while the sloping faces of the boomerang-shaped barbule cross-section reflect blue at oblique angles. Scale bar in b: 1 cm. (From Stavenga et al., 2011)

Christmas Trees

The butterflies Morpho didius and Morpho rhetenor obtain their dazzling blue color not from simple multilayer’s but from more complex nanostructures in the wing scales: arrays of ornate chitin ‘Christmas Trees’ that sprout at the surface (Vukusic & Sambles, 2003) (Figure 4). Each ‘tree’ presents a stack of disk-like layers to the incoming light, which acts as another kind of diffraction grating. These arrays may reflect up to 80 percent of the incident blue light. And because they are not flat, they can reflect a single color over a range of viewing angles, somewhat reducing the iridescence; organisms don’t always want to change color or get dimmer when seen from different directions. 

Figure 4

Figure 4. The butterfly Morpho didius (left) obtains its dazzling blue color from delicate ‘Christmas Tree’ light-scattering structures (right), made from chitin, that sprout within the wing scales. (Left, courtesy of Peter Vukusic. Right (micrograph) from Vukusic and Sambles, 2003.)

The precise color reflected depends on the refractive index contrast between the nanostructures and the surrounding medium. This is usually air, but as Robert Hooke observed, wetting such surfaces alters the refractive index contrast, and changes the color in a way that is closely linked to the wetting liquid’s refractive index. For that reason, artificial Morpho-like structures carved into solids using microlithographic techniques are being developed by researchers at GE Global Research in New York, in collaboration with others at the State University of New York at Albany and butterfly-wing expert Pete Vukusic at the University of Exeter in England, as color-change chemical sensors that can identify a range of different liquids (Potyrailo, 2011). These might find applications for sensing emissions at power plants, monitoring of food safety, and testing of water purity. 

Reflecting Bowls

The bright green color of the Emerald Swallowtail butterfly (Papilio palinurus), found widely in southeast Asia, is not produced by green light at all. The wing scales are covered with a honeycomb array of tiny bowl-shaped depressions just a few micrometers across, lined with alternating layers of chitin cuticle and air which act as reflective mirrors. Light bouncing off the bottoms of the bowls is preferentially reflected in the yellow part of the spectrum. But from the sides it is reflected twice before bouncing back, and this selects blue. Our eyes can’t resolve these yellow spots and blue rings, which merge to create the perception of green (Vukusic & Sambles, 2003). 

Figure 5

Figure 5. The green of the Emerald Swallowtail butterfly (left) comes from the optical mixing of blue and yellow reflections from tiny bowl-like depressions in the wing scales (right). (Right figure, courtesy of Christopher Summers, Georgia Institute of Technology) 

This way of making color has been copied by Summers and coworkers (Crne et al., 2011). To create the tiny bowls, they let water vapour condense as microscopic droplets, called breath figures, on the surface of a polymer dissolved in a volatile solvent. The solvent gradually evaporates to form a solid polymer film, while the water droplets pack together on the surface of the drying solution much like greengrocers’ oranges and apples in crates, sinking into the setting film to imprint an array of holes. By pulling off the top part of the film, Summers and colleagues were left with a surface with hemispherical bowl-like dimples. They then used this structure as a template on which they deposited alternating thin layers of titania and alumina to make a multilayer reflector, like that lining the bowls of the butterfly wing scales (Figure 6). 

Figure 6

Figure 6. An artificial micro-structured surface that mimics the green color of the Emerald Swallowtail. Scale bar: 5 µm. (Courtesy of Christopher Summers, Georgia Institute of Technology)

Because each reflection changes the polarization of the light, under crossed polarizing filters the yellow light bouncing back from a single reflection at the bowl centers disappears, while the twice-reflected blue-green light from the rims remains. This could offer a distinctive authentification mark on bank and credit cards. Apparently just a simple green reflective coating, such a material would in fact carry a hidden polarized signature in the reflected blue and yellow light that would be hard to counterfeit. But Summers’ collaborator Mohan Srinivasarao admits that the main reason for seeking to replicate the butterfly’s green color was that “it’s beautiful in its own right”. 

Ordered Nanosponges

Scattering by regular arrays of microscopic objects can, for some arrangements, totally exclude light within a particular band of wavelengths, called the photonic band gap (Vukusic, 2004). These so-called photonic crystals occur naturally, for example, in opal, a biogenic form of silica in which the scatterers are tiny mineral spheres. Artificial photonic crystals can be used to confine light within narrow channels, creating waveguides that might be deployed to guide light around on silicon chips for optical information technology. 

Nature has already got there first. Under the electron microscope, the wing scales the Emerald Patched Cattleheart Butterfly (Parides sesostris) display zigzagging, herring-bone arrays: patches of an orderly sponge made from chitin with holes a hundred nanometers or so across. Each patch is a photonic crystal seen from a different alignment. Stavenga and Michielsen have found that these labyrinths in the wing-scales of P. sesostris and some species of papilionid and lycaenid butterflies have a structure known to mathematicians as a gyroid (Michielsen & Stavenga, 2008). In P. sesostris the structure has a photonic band gap that enables it to reflect light within the green part of the spectrum over a wide range of incident angles (Figure 7). Some weevils and other beetles also derive their iridescent color from three-dimensional photonic crystals made of chitin. 

Figure 7

Figure 7. The wing scales of P. sesostris (top left, and close-up, top right) contain photonic crystals of chitin (bottom, middle and right) Scale bars: left, 100 µm; middle, 2 µm; right, 2 µm. (Bottom figure, from Saranathan et al., 2010)

Richard Prum and coworkers have figured out how these photonic crystals grow (Saranathan et al., 2010). The molecules in the soft membranes that template the deposition of chitin during wing-scale growth become spontaneously organized into the ‘crystalline sponge’. Biological membranes are made up of long, tadpole-like molecules called lipids, which have a water-soluble head and an oily tail. To shield the tails from water, they cluster side by side into sheets with the heads pointing outwards; the sheets then sit back to back in bilayer membranes. Pores in these membrane induce curvature, partly exposing the lipid tails and therefore incurring a cost in energy. For this reason, the pores in effect repel one another, and this can force them to become arranged in a regular way, an equal distance apart. Periodic membrane structures have been found in the cells of many different organisms, from bacteria to rats (Hyde et al., 1997). 

In P. sesostris wing-scale progenitor cells, the outer ‘plasma membrane’ and the folded membrane of the inner compartments called the endoplasmic reticulum, where lipids and other molecules are made, come together to form a so-called double-gyroid structure (Figure 8, left), in which two interweaving sets of channels divide up space into three networks that interpenetrate, but are isolated from one another. One of these is then filled with chitin, which hardens into a robust form while the cell dies and the rest of the material is degraded, leaving behind the single gyroid phase (Saranathan et al., 2010). 

It has been suggested that these natural nanostructures might be used as the templates for making artificial ones, for example, by filling the empty space around the chitin with a polymer or an inorganic solid, and then dissolving away the chitin (Saranathan et al., 2010). But it is also possible to mimic the structures from scratch. For instance, artificial bilayer membranes made from lipid-like molecules called surfactants will also form orderly sponges, and so will so-called block copolymers, in which the chain-like molecules consist of two stretches with different chemical composition (Hyde et al., 1997). Ulrich Wiesner and coworkers (Stefik et al., 2012) have mixed liquid block copolymers with nanoparticles of niobium and titanium oxide, and let the polymers form into gyroid and other ordered ‘nanosponge’ structures that usher the nanoparticles into the same arrays. When this composite is heated, the polymer is burnt away while the mineral nanoparticles coalesce into continuous networks (Figure 8, center). 

These porous solids could find a wide range of uses. Thin porous films of titanium dioxide nanoparticles coated in light-absorbing dyes are already used in low-cost solar cells. These orderly gyroid networks can offer improvements, partly because the solid material through which light-excited electrons are harvested is continuously connected rather than relying on random electrical contacts between nanoparticles. And the researchers have calculated that double-gyroid nanosponges made from metals such as silver or aluminum, which might similarly be assembled from nanoparticles guided by block copolymers, could have the weird property of a negative refractive index, meaning that they would bend light ‘the wrong way’ (Hur et al., 2011). Such materials could be used to make so-called superlenses for optical microscopes that can image objects smaller than the wavelength of light; something that isn’t possible with conventional lenses. 

Inspired by the butterfly structures, Mark Turner and colleagues (Turner et al., 2011) have used laser beams to ‘write’ these intricate three-dimensional photonic crystals directly into a commercial light-polymerizable ‘photoresist’ material (Figure 8, right). Being somewhat ‘scaled-up’ versions of the natural nanostructures, these had photonic band gaps in the infrared part of the spectrum. Current telecommunications operates mostly at infrared wavelengths, and these structures could find uses there; some, for example, have a corkscrew lattice that make them respond differently to circularly polarized light with a left- or right-handed twist. 

Figure 8

Figure 8. The gyroid phase (left), and structures mimicking the ‘butterfly gyroid’: (middle) a network of titania organized by self-assembly of a block copolymer, and (right) a larger-scale lattice made by setting a light-sensitive polymer with laser beams (scale bar: 10 µm). (Left figure, courtesy of Matthias Weber, Indiana University. Middle figure, from Stefik et al., 2012. Right figure, from Turner et al., 2011)

Photonic Crystal Fibers

The spines of some marine polychaete worms, such as Aphrodita (the sea mouse) and Pherusa, are tubular structures containing hexagonally packed hollow cylindrical channels a few hundred nanometers across and made from chitin. These arrays act as two-dimensional photonic crystals that reflect light strongly in the long-wavelength part of the spectrum, which gives the Aphrodite spine a deep, iridescent red color (Figure 9) (Parker et al., 2001; Trzeciak & Vukusic, 2009). 

Figure 9a
Figure 9b
Figure 9c

Figure 9. The tiny spines of polychaete worms such as the sea mouse (Polychaeta: Aphroditidae; top left) are natural photonic crystals. Seen close up in cross section, they consist of regularly packed hollow channels with walls of chitin. Middle left: cross-section from Pherusa (scale bar: 2 µm); center: side view of channels from Aphrodita; right: the red color of light passing through a spine of Aphrodita. Artificial photonic fibres like this can easily be made by heating and drawing out bundles of glass capillaries (bottom). They can confine light within the ‘solid’ channels even around tight bends. (Note the solid ‘defect’ in the central channel.) (Top, middle center and middle right, courtesy of Andrew Parker, University of Oxford. Middle left, from Trzeciak & Vukusic, 2009. Bottom, from Russell, 2003)

It is not clear if the optical properties of the polychaete spines have any biological function. But there are certainly uses for such light-manipulating fibres in optical technology. For example, Philip Russell and collaborators (Russell, 2003) have made them by stacking glass capillaries into hexagonally packed bundles and drawing them out under heat into narrow fibers laced through with holes. If ‘defects’ are introduced into the array of tubular channels, either by including a wider capillary or a solid rod in the bundle, light can pass along the defect while being excluded from the photonic crystal, creating an optical fiber with a cladding that is essentially impermeable to light of wavelengths within the band gap. Photonic crystal fibers like this can guide light around tighter bends than is usually possible with conventional fibers, where the light is confined less reliably by internal reflection at the fibre surface. As a result, these fibers would work better for guiding light in tightly confined spaces, such as on optical microchips. And because photonic crystal fibers are in general less ‘leaky’ than conventional ones, they could be replace them in optical telecommunications networks, requiring less power, and obviating the need for amplifiers to boost signals sent over long distances.  

Disordered Nanosponges

The splendid blue and green plumage of many birds, while also being physical rather than pigmented colors, lacks the iridescence of the hummingbird or the peacock. Instead, they have the same color viewed from any angle. They scatter light from sponge-like keratin nanostructures; but because these structures are disordered, the scattering is diffuse, like the blue of the sky, rather than mirror-like and iridescent (Dufresne et al., 2009). 

In the blue-and-yellow macaw, Ara ararauna, (Figure 10), and the black-capped kingfisher Halcyon pileata, the empty spaces in the keratin matrix of the feather barbs form tortuous channels about 100 nm wide. A similar random network of filaments in the cuticle of the Cyphochilus beetle gives it a dazzlingly bright white shell. In some other birds, such as the blue-crowned manakin, Lepidothrix coronata, the air holes are instead little spherical bubbles connected by tiny cavities. 

Figure 10a
Figure 10b

Figure 10. The blue feathers of the blue-and-yellow macaw contain sponge-like labyrinths of air and keratin (bottom left), which scatter blue light strongly in all directions. Some other feathers derive similar colors from spherical ‘bubble-like’ air holes in the keratin matrix (bottom right). Scale bars: 500 nm. (Bottom figure, from Dufresne et al., 2009)

It is believed that both of these structures are formed as keratin separates out spontaneously from the fluid cytoplasm of feather-forming cells, like oil from water (Dufresne et al., 2009). In liquid mixtures, such as solidifying molten metal alloys or polymers, such phase separation creates different structures in different conditions. If the mixture is intrinsically unstable, the components separate into disorderly, interwoven channels in a process called spinodal decomposition. But if the mixture is metastable (provisionally stable), like water supersaturated with dissolved gas, then the separating phase will form discrete blobs or bubbles that grow from very tiny ‘seeds’ or nuclei. Prum thinks that either of these processes may happen as bird feathers develop, and that birds have evolved a way of controlling the rate of keratin phase separation so that they can arrest the nanostructure at a certain size. Once the cells have died and dried, this size determines the wavelength of scattered light, and thus the feather’s color. 

This kind of diffuse light-scattering has been used for centuries as a way of making colors in technology. In milk, microscopic droplets of fat with a wide range of sizes cause scattering of all visible wavelengths, and give the liquid its opaque whiteness. Michael Faraday discovered in the nineteenth century that light scattering from nanoscale particles of gold suspended in water can create a deep reddish-purple color with a precise hue that depends on the size of the particles. Glassmakers had been using alchemical recipes to precipitate nanoscale gold particles in molten silica to make ruby glass ever since ancient times. 

Today, engineers are looking at how these random networks and particle arrays can give rise to strongly colored and high-opacity materials. Pete Vukusic and colleagues (Hallam et al., 2009) have mimicked the cuticle of Cyphochilus beetles in random porous networks made from interconnected filaments of the minerals calcium carbonate and titanium dioxide mixed with a polymer and oil liquid binders and left to dry. Guided by the size and density of filaments in the beetle shell, they were able to make thin coatings with brilliant whiteness. Meanwhile Prum, his colleague Eric Dufresne and their coworkers at Yale University (Forster et al., 2010) have mimicked the disordered sponges of bird feathers by creating films of randomly packed microscopic polymer beads, which have blue-green colors (Figure 11). 

Figure 11

Figure 11. This thin film of randomly arrayed polymer microspheres mimics the keratin matrix in the blue feathers of the blue-crowned manakin. (From Forster et al., 2010)

Color Change

One of the most enviable optical tricks in nature is to produce reversible color changes. The reflective, protean colors in the skins of squid such as the Loligidinae family are produced by a protein called reflectin, arranged into plate-like stacks in cells called iridophores, which again act as color-selective reflectors (Figure 12). The color changes are thought to be involved in both camouflage and communication between squid for mating and displays of aggression. 

Figure 12

Figure 12. Stacked plates of the reflectin protein (left) in iridophore cells (center) create tunable reflective colors in squid (right). (Center figure, courtesy of Daniel Morse, University of California at Santa Barbara)

Daniel Morse and colleagues have recently figured out how the color changes of iridophores are achieved (Tao et al., 2010). The reflectin proteins crumple up into nanoparticles, which pack together into dense arrays that make up the flat layers. These layers are sandwiched between deep folds of the cell membrane. The color change can be triggered by neurotransmitter lipid molecules called acetylcholine, which activate a biochemical process that fixes electrically charged phosphate chemical groups onto the reflectin protein. These groups largely neutralize the proteins’ intrinsic charge and allow them to pack more closely together, increasing the reflectivity of the layers. At the same time, this compaction squeezes water from between the protein particles and out of the cell, and enables the reflectin layers to sit closer together. 

Morse and colleagues (Holt et al., 2010) think that it should be possible to copy some of these tricks in optical devices, perhaps even using reflectins themselves. They have inserted the gene encoding a reflectin protein from the long-finned squid Loligo pealeii into Escherichia colibacteria. When expressed, the protein spontaneously collapses into nanoparticles (Tao et al., 2010). The size of these particles can be tuned by controlling the interactions between charged groups on the proteins using salt. Held between stacks of permeable membranes, these materials might therefore swell and contract, altering the reflected wavelengths, in response to chemical triggers. Morse and colleagues have also taken inspiration from reflectins to develop a light switch based on a wholly synthetic light-sensitive polymer. They use an electric field both to change the refractive index of the polymer and to pull salt into the polymer film to swell it. As with iridophores, this combination of effects alters the material’s response to light dramatically, switching it from transparent to opaque; all without moving parts or high-tech manufacturing methods. The team are currently working with Raytheon Vision Systems, an optics company in Goleta, California, to use this system in fast shutters for infrared cameras. 

The Art and Science of Natural Color Mixing

Many of the optical effects found in nature are not purely due to structural colors, but arise from their combination with absorbing pigments (Shawkey et al., 2009). In squid, a thin pigment layer above the reflective layer acts as a filter that can modify the appearance, for example, making it mottled; reflective and absorbing to different degrees in different places. In bird feathers, the physical colors resulting from melanin nanostructures embedded in a keratin protein matrix can be tuned by light-absorbing filters of pigments, such as carotenoids, which absorb red and yellow light. The characteristic green plumage of parrots seems to be produced by laying a yellow pigment over a blue reflective layer of melanin and keratin (Figure 13). And the purple wing tips of Purple Tip butterflies come from red pigments beneath a blue iridescent surface. 

Figure 13

Figure 13. Green is a characteristic color of parrots, but their plumage contains no green pigment, nor is it purely a structural color. Rather, it results from ‘structural blue’ overlaid with a filter of yellow pigment.

Chameleons display perhaps the most advanced mastery of these mixing tricks. Their spectacular color changes are produced by three separate systems for modifying the reflected light, stacked one atop the other. The first layer consists of cells containing red and yellow light-absorbing pigment particles, the location of which within the cell determines the color intensity. Below these are iridophores like those of squid, from which blue and white light may be selectively reflected by crystalline layers of the molecule guanine (also a component of DNA). Finally there is a layer of cells containing the dark pigment melanin, which act like the colored ‘ground’ layers of Old Master paintings to modify the reflection of light that penetrates through the first two layers. This combination of reflection and absorption enables the chameleon to adapt its skin color across a wide, albeit species-specific, range to signal warning, for mating displays, and for camouflage (Forbes, 2009). 

How pigments alter and adjust the reflected light in such cases is still imperfectly understood. One problem is that the combinations are so diverse; more than 20 different arrangements of melanin, keratin and air have been identified in the plumage of birds. Moreover, melanin is itself a light absorber, creating colors ranging from yellow to black. The bright white markings on the blue wings of the Morpho cypris butterfly are produced by simply removing the melanin from reflective multilayer structures; the mirrors remain, but the pigments do not. 

In such ways, evolution has made creative use of the limited range of materials at its disposal to generate a riot of profuse coloration and markings. A better understanding of how this is achieved could give painters and visual artists access to entirely new ways of making colors based on iridescent and pearlescent pigments, whose use has so far been largely restricted to less sophisticated applications in the automobile and cosmetic industries (Schenk & Parker, 2011). 

Painter Franziska Schenk has been exploring the mixing of structural and pigmented color during her stay as artist-in-residence in the Department of Biosciences at the University of Birmingham in the UK (Schenk, 2009). With iridescent particles, says Schenk, “the established methods of easel painting no longer apply. Their conversion to painting requires something truly innovative.” 

Schenk used iridescent particles to reproduce the starting blue of the Morpho wing in a series of paintings that change color when lit or viewed from different angles (Figure 14). The background color on which the particles are placed is central to the effect. On white, the light not reflected from the blue particles passes through and bounces off the base. This means that when not seen face-on, the blue quickly fades and is replaced by a muted yellow. But on a black background, all non-blue light is absorbed, and the blue is more pure and intense. 

Figure 14

Figure 14. Painting of a Morpho butterfly wing by Franziska Schenk, using blue pearlescent pigments. The color changes depending on the angle of illumination, as well as on the nature of the background color. (Courtesy of Franziska Schenk)

Although the brilliance of these colors doesn’t approach that of butterfly wings, it takes advantage of recent improvements in synthetic pearlescent particles. The first of these were made by coating mica flakes with multilayers of metal oxides to generate the diffraction grating. But because the mica surfaces were not perfectly smooth and the grain sizes varied, there was always a range in the precise colors and intensities of the particles. Schenk has used pigments in which the mica substrate is replaced by a transparent borosilicate glass, which is smoother and gives a purer hue. She believes that “iridescent technology is destined to introduce a previously unimaginable level of intensity and depth, thus adding beauty, luster and a dynamic dimension to art”. Schenk’s Studies of Cuttlefish (Figure 15) is a painting that uses iridescent flakes mixed with beads and wax. 

Figure 15

Figure 15. “Studies of Cuttlefish” by Franziska Schenk, using iridescent flakes mixed with beads and wax. (Courtesy of Franziska Schenk)

Another series of cuttlefish, “Mantle of Many Colours” (Figure 16), was made with iridescent paint that differs in appearance depending on the conditions and angle of lighting, which results in a compelling chameleon effect that traditional paints simply cannot create. The colors change from greens to purples as the viewing angle shifts. “Still images, together with any attempt to verbally describe the effect, are pretty limiting”, Schenk admits; you have to see these things in the flesh to appreciate their full impact. 

Figure 16

Figure 16. “Mantle of Many Colours” by Franziska Schenk, which uses iridescent paint, as seen from different angles. (Courtesy of Franziska Schenk)

Conclusion

“Every day you play with the light of the universe”, wrote the Chilean poet Pablo Neruda, but he had no idea how literally true this would become. Our technologies for transmitting, manipulating and displaying information, whether for work or play, depend increasingly on our ability to control light; to harness and transform color. Some of nature’s most stunning sights depend on such a facility too, and often they show us that beauty can be inextricably linked to utility. We are impressed by plumage, by markings and animal displays, that are specifically designed by evolution to make such an impression. And nature has found ways to make this chromatic exuberance robust, changeable, responsive, and cheap and reliable to manufacture. In shaping color without the chemical contingency of pigments, there seems to be little we can dream up that nature has not already anticipated, exploiting its capacity to fashion intricate fabrics and structures on the tiniest scales. We can only learn, and admire. 

References

Note: The current article is an extended version of Ball P (2012), “Nature’s color tricks”, Sci. Am. 306(5), 74-79.  

Crne M, Sharma V, Blair J, Park J O, Summers C J & Srinivasaro M (2011), “Biomimicry of optical microsctructures of Papilio palinurus”, Europhys. Lett. 93, 14001. 

Dufresne E R, Noh H, Saranathan V, Mochrie S G J, Cao H & Prum R O (2009), “Self-assembly of amorphous biophotonic nanostructures by phase separation”, Soft Matter 5, 1792-1795. 

Forbes P (2009), Dazzled and Deceived: Mimicry and Camouflage. Yale University Press, New Haven. 

Forster J D, Noh H, Liew S F, Saranathan V, Schrenk C F, Yang L, Park J-G, Prum R O, Mochrie S G J, O’Hern C S, Cao H & Dufresne E R (2010), “Biomimetic isotropic nanostructures for structural coloration”, Adv. Mater. 22, 2939-2944. 

Hallam B T, Hiorns A G & Vukusic P (2009), “Developing optical efficiency through optimized coating structure: biomimetic inspiration from white beetles”, Appl. Opt. 48, 3243-3249. 

Holt A L, Wehner J G A, Hampp A & Morse D E (2010), “Plastic transmissive infrared electrochromic devices”, Macromol. Chem. Phys. 211, 1701-1707. 

Hooke R (1665), Micrographia. Reprinted by BiblioBazaar, p. 294. Charleston, South Carolina, 2007. 

Hur K, Francescato Y, Giannini V, Maier S A, Hennig R G & Wiesner U (2011), “Three-dimensionally isotropic negative refractive index materials from block copolymer self-assembled chiral gyroid networks”, Angew. Chem. Int. Ed. 50, 11985-11989. 

Hyde S, Blum Z, Landh T, Lidin S, Ninham B W, Andersson S & Larsson K (1997), The Language of Shape. Elsevier, Amsterdam. 

Michielsen K and Stavenga D G (2008), “Gyroid cuticular structures in butterfly wing scales: biological photonic crystals”, J. R. Soc. Interface 5, 85-94. 

Parker A R, McPhedran R C, McKenzie D R, Botten L C & Nicorovici N-A P (2001), “Aphrodite’s iridescence”, Nature 409, 36-37. 

Potyrailo R A (2011), “Bio-inspired device offers new model for vapor sensing”, SPIE Newsroom, 10.1117/2.1201103.003568. 

Russell P (2003), “Photonic crystal fibers”, Science 299, 358-362. 

Saranathan V, Osuji C O, Mochrie S G J, Noh H, Narayanan S, Sandy A, Dufresne E R & Prum R O (2010), “Structure, function, and self-assembly of single network gyroid (I4132) photonic crystals in butterfly wing scales”, Proc. Natl Acad. Sci. USA 107, 11676-11681. 

Schenk F (2009), “Nature’s fluctuating colour captured on canvas?”, Int. J. Design & Nature and Ecodynamics 4(3), 1-11. 

Schenk F & Parker A (2011), “Iridescent color: from nature to the painter’s palette”, Leonardo 4(2) [no page numbers]. 

Shawkey M D, Morehouse N I & Vukusic, P (2009), “A protean palette: colour materials and mixing in birds and butterfiles”, J. R. Soc. Interface 6, S221-S231. 

Stavenga D G, Leertouwer H L, Marshall N J & Osorio D (2011), “Dramatic colour changes in a bird of paradise caused by uniquely structured breast feather barbules”, Proc. R. Soc. B 278, 2098-2104. 

Stefik M, Wang S, Hovden R, Sai H, Tate M W, Muller D A, Steiner U, Gruner S M & Wiesner U (2012), “Networked and chiral nanocomposites from ABC triblock terpolymer coassembly with transition metal oxide nanoparticles”, J. Mater. Chem. 22, 1078-1087. 

Tao A R, DeMartini D G, Izumi M, Sweeney A M, Holt A L & Morse D E (2010), “The role of protein assembly in dynamically tunable bio-optical tissues”, Biomaterials 31, 793-801. 

Turner M D, Schröder-Turk G E & Gu M (2011), “Fabrication and characterization of three-dimensional biomimetic chiral composites”, Opt. Express 19(10), 10001-10008. 

Vukusic P and Sambles J R (2003), “Photonic structures in biology”, Nature 424, 852-855. 

Vukusic P (2004), “Natural photonics”, Physics World 17 (2), 35-39. 

Trzeciak T M & Vukusic P (2009), “Photonic crystal fiber in the polychaete worm Pherusa sp.”, Phys. Rev. E 80, 061908. 

Wolpert H D (2009), “Optical filters in nature”, Optics and Photonics News 20(2), 22-27. 

05/30/12 

Technology of Nanostructures

Colloidal Self Assembly for fabrication of Photonic nanostructures including

  • Colloidal crystals
  • Composite and Inverse Opals
  • Photonic Glasses

Applications

  • Displays
  • Optical Devices
  • Photochemistry
  • Biological Sensors

Source: Self-assembled colloidal structures for photonics

My related posts

On Light, Vision, Appearance, Color and Imaging

Digital Color and Imaging

Color and Imaging in Digital Video and Cinema

Shapes and Patterns in Nature

Growth and Form in Nature: Power Laws and Fractals

On Luminescence: Fluorescence, Phosphorescence, and Bioluminescence

Color Change: In Biology and Smart Pigments Technology

Optics of Metallic and Pearlescent Colors

Selected Review Papers

Structural colors: from natural to artificial systems

Self-assembled colloidal structures for photonics

Bioinspired Stimuli-Responsive Color-Changing Systems

Structural coloration in nature

Emerging optical properties from the combination of simple optical effects
Artificial Structural Color Pixels: A Review

https://www.mdpi.com/1996-1944/10/8/944/htm

Bio-Inspired Variable Structural Color Materials

Bio-inspired intelligent structural color materials

Biomimetic and Bioinspired Photonic Structures

Key Sources of Research

Structural color materials in evolution

Volume 19, Issue 8, Page 420–421 | Luoran Shang, Zhongze Gu, Yuanjin Zhao

https://www.materialstoday.com/amorphous/articles/s136970211600095x/

https://www.sciencedirect.com/science/article/pii/S136970211600095X?via%3Dihub

Crafting Color

by KATHERINE XUE

Harvard Magazine 2014

JULY-AUGUST 2014

https://harvardmagazine.com/2014/07/crafting-color

A Different Form of Structural Color in Birds

Molly Moser

https://www.osa-opn.org/home/newsroom/2020/may/a_different_form_of_structural_color_in_birds/

Tunable Structural Color Patterns Based on the Visible‐Light‐Responsive Dynamic Diselenide Metathesis

Cheng LiuZhiyuan FanYizheng TanFuqiang FanHuaping Xu

First published: 06 February 2020

https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.201907569

Structural color and its interaction with other color-producing elements: perspectives from spiders

Bor-Kai HsiungTodd A. BlackledgeMatthew D. Shawkey

https://www.spiedigitallibrary.org/conference-proceedings-of-spie/9187/91870B/Structural-color-and-its-interaction-with-other-color-producing-elements/10.1117/12.2060831.short?SSO=1

Structural Colour in Nature

Cambridge University

https://www.ch.cam.ac.uk/group/vignolini/research/structural-colour-nature

Angle-independent structural colors of silicon

Emil Højlund-NielsenJohannes WeirichJesper NørregaardJoergen GarnaesN. Asger MortensenAnders Kristensen

J. of Nanophotonics, 8(1), 083988 (2014)

https://www.spiedigitallibrary.org/journals/journal-of-nanophotonics/volume-8/issue-1/083988/Angle-independent-structural-colors-of-silicon/10.1117/1.JNP.8.083988.short?SSO=1

Omnidirectional Structural Color

Recommended paper in Journal of Nanophotonics.

01 October 2014 

Tom Mackay

https://spie.org/news/spie-professional-magazine-archive/2014-october/hilites-jnp-omnidirectional-structural-color?SSO=1

Structural color switching with a doped indium-gallium-zinc-oxide semiconductor 

Inki Kim, Juyoung Yun, Trevon Badloe, Hyuk Park, Taewon Seo, Younghwan Yang, Juhoon Kim, Yoonyoung Chung, and Junsuk Rho

Polymer opal with brilliant structural color under natural light and white environment

Published online by Cambridge University Press:  17 August 2015

https://www.cambridge.org/core/journals/journal-of-materials-research/article/abs/polymer-opal-with-brilliant-structural-color-under-natural-light-and-white-environment/FEB1DB9D31744F911EB53BDFADC1702C

Structural colors from cellulose-based polymers

Self-assembly of responsive photonic biobased materials in liquid marbles

https://www.eurekalert.org/pub_releases/2020-08/w-scf082820.php

Bio-inspired robust non-iridescent structural color with self-adhesive amorphous colloidal particle arrays

https://pubs.rsc.org/en/content/articlelanding/2018/nr/c7nr08056e#!divAbstract

Transmissive/Reflective Structural Color Filters: Theory and Applications


Yan Yu,1,2 Long Wen,2 Shichao Song,2 and Qin Chen2,3

https://www.hindawi.com/journals/jnm/2014/212637/

Structural coloration and its application to textiles: a review

https://www.tandfonline.com/doi/full/10.1080/00405000.2019.1663623

Engineers make clear droplets produce iridescent colors

https://news.mit.edu/2019/water-droplets-structural-color-0227

Colouration by total internal reflection and interference at microscale concave interfaces

Nature 566, pages 523–527 (2019)

https://www.nature.com/articles/s41586-019-0946-4

https://www.nature.com/articles/d41586-019-00638-4

Structural color for wood coloring: A Review

Hu, J., Liu, Y., and Wu, Z. (2020). “Structural color for wood coloring: A Review,” BioResources, 15(4), 9917-9934.

Structural colour using organized microfibrillation in glassy polymer films

https://www.nature.com/articles/s41586-019-1299-8

Crazy colour printing without ink

https://www.nature.com/articles/d41586-019-01856-6

Colour without colourants

Nature volume 472, pages423–424(2011)

https://www.nature.com/articles/472423a

Structural Color in Animals

https://link.springer.com/referenceworkentry/10.1007%2F978-90-481-9751-4_384

Biomimetics of Optical Nanostructures

https://link.springer.com/referenceworkentry/10.1007%2F978-90-481-9751-4_393

Highly selective photonic glass filter for saturated blue structural color 

APL Photonics 4, 046101 (2019

https://aip.scitation.org/doi/10.1063/1.5084138

Photonic glass based structural color

APL Photonics 5, 060901 (2020

https://aip.scitation.org/doi/10.1063/5.0006203

Self-assembling structural colour in nature

Stephanie L Burg1 and Andrew J Parnell1

Published 20 September 2018 • © 2018 IOP Publishing Ltd
Journal of Physics: Condensed MatterVolume 30Number 41

https://iopscience.iop.org/article/10.1088/1361-648X/aadc95

Structural colour

BY ANGELI MEHTA

25 MAY 2018

https://www.chemistryworld.com/features/structural-colour/3009020.article

Structural coloration in nature 

Jiyu Sun,*abBharat Bhushan*b  and  Jin Tonga

https://pubs.rsc.org/en/content/articlelanding/2013/ra/c3ra41096j#!divAbstract

https://www.researchgate.net/publication/255772388_Structural_coloration_in_nature

MECHANICS OF STRUCTURAL COLOR

https://mechse.illinois.edu/news/blogs/mechanics-structural-color

Color from Structure

https://www.the-scientist.com/cover-story/color-from-structure-39860

6 – Structural Color in Nature: Basic Observations and Analysis

Shinya Yoshioka

https://www.sciencedirect.com/science/article/pii/B9780123970145000067

Nanophotonic Structural Colors

  • Soroosh Daqiqeh Rezaei*
  • Zhaogang Dong, 
  • John You En Chan, 
  • Jonathan Trisno, 
  • Ray Jia Hong Ng, 
  • Qifeng Ruan, 
  • Cheng-Wei Qiu, 
  • N. Asger Mortensen, and 
  • Joel K.W. Yang*

 ACS Photonics 2020, Publication Date:July 28, 2020

https://pubs.acs.org/doi/10.1021/acsphotonics.0c00947

Iridescence-controlled and flexibly tunable retroreflective structural color film for smart displays

  1. Wen Fan1,*
  2. Jing Zeng1,*
  3. Qiaoqiang Gan2,3,*
  4. Dengxin Ji2
  5. Haomin Song2
  6. Wenzhe Liu4
  7. Lei Shi4 and 
  8. Limin Wu1,

Science Advances  09 Aug 2019:
Vol. 5, no. 8,

https://advances.sciencemag.org/content/5/8/eaaw8755

Designing Structural-Color Patterns Composed of Colloidal Arrays

  • Jong Bin Kim, 
  • Seung Yeol Lee, 
  • Jung Min Lee, and 
  • Shin-Hyun Kim*

https://pubs.acs.org/doi/10.1021/acsami.8b21276

Physics, Development, and Evolution of Structural Coloration

Prum Lab

Yale Iniv

https://prumlab.yale.edu/research/physics-development-and-evolution-structural-coloration

Structural colors in nature: the role of regularity and irregularity in the structure

Shuichi Kinoshita 1Shinya Yoshioka

https://pubmed.ncbi.nlm.nih.gov/16015669/

Structural Colors in the Realm of Nature

https://doi.org/10.1142/6496 | October 2008Pages: 368

https://www.worldscientific.com/worldscibooks/10.1142/6496

Self-assembling structural colour in nature

Stephanie L Burg1 and Andrew J Parnell1

Published 20 September 2018 • © 2018 IOP Publishing Ltd
Journal of Physics: Condensed MatterVolume 30Number 41

https://iopscience.iop.org/article/10.1088/1361-648X/aadc95

Structural Colors In Butterflies

http://www.uvm.edu/~dahammon/Structural_Colors/Structural_Colors/Structural_Colors_In_Butterflies.html

Video: Silica layer enables tuning of structural colors for biocompatible pigments that don’t fade in tattoos, paints, foods, and more

Bioinspired bright noniridescent photonic melanin supraballs

https://advances.sciencemag.org/content/3/9/e1701151/tab-pdf

Nature’s Fantastical Palette: Color from Structure

Philip Ball
18 Hillcourt Road
East Dulwich
London SE22 0PE, UK
p.ball@btinternet.com

http://photobiology.info/Ball.html

Bio-inspired intelligent structural color materials

Luoran Shang, page2image1859075856ab Weixia Zhang, page2image1859077760b Ke Xuc and Yuanjin Zhao

Bio-inspired variable structural color materials

Yuanjin Zhao,w Zhuoying Xie,w Hongcheng Gu, Cun Zhu and Zhongze Gu

Chem. Soc. Rev., 2012, 41, 3297–3317

Self-Assembly of Colloidal Particles for Fabrication of Structural Color Materials toward Advanced Intelligent Systems

Heng Zhang, Xiuming Bu, SenPo Yip, Xiaoguang Liang, and Johnny C. Ho

https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.201900085

Spherical Colloidal Photonic Crystals with Selected Lattice Plane Exposure and Enhanced Color Saturation for Dynamic Optical Displays

Jing Zhang,† Zhijun Meng,‡ Ji Liu,§ Su Chen,† and Ziyi Yu

Photonic Crystal Structures with Tunable Structure Color as Colorimetric Sensors 

by Hui Wang and Ke-Qin Zhang

https://www.mdpi.com/1424-8220/13/4/4192/htm

Color from hierarchy: Diverse optical properties of micron-sized spherical colloidal assemblies

Nicolas Vogel, Stefanie Utech, Grant T. England, Tanya Shirman, Katherine R. Phillips, Natalie Koay, Ian B. Burgess, Mathias Kolle, David A. Weitz, and Joanna Aizenberg

PNAS September 1, 2015 112 (35) 10845-10850; first published August 19, 2015;

https://www.pnas.org/content/112/35/10845.full

Structural Color Patterns on Paper Fabricated by Inkjet Printer and Their Application in Anticounterfeiting

Phys. Chem. Lett. 2017, 8, 13, 2835–2841Publication Date:June 9, 2017

https://pubs.acs.org/doi/abs/10.1021/acs.jpclett.7b01372

Artificial Structural Color Pixels: A Review 

by Yuqian Zhao 1Yong Zhao 1,*Sheng Hu 1Jiangtao Lv 1Yu Ying 2Gediminas Gervinskas 3 and Guangyuan Si 3,*1

College of Information Science and Engineering, Northeastern University, Shenyang 110004, China2College of Information & Control Engineering, Shenyang Jianzhu University, Shenyang 110168, China3Melbourne Centre for Nanofabrication, Clayton, Victoria 3168, Australia*Authors to whom correspondence should be addressed. 

Materials 201710(8), 944; 

https://www.mdpi.com/1996-1944/10/8/944/htm

Bioinspired structural color sensors based on responsive soft materials

Meng Qin, Mo Sun, Mutian Hua, Ximin He⁎

Current Opinion in Solid State & Materials Science

Progress in polydopamine-based melanin mimetic materials for structural color generation

Michinari Kohri

Science and Technology of Advanced Materials,

https://www.tandfonline.com/doi/pdf/10.1080/14686996.2020.1852057

Engineering Light at the Nanoscale: Structural Color Filters and Broadband Perfect Absorbers

Chengang Ji, Kyu-Tae Lee, Ting Xu, Jing Zhou, Hui Joon Park, and L. Jay Guo

https://deepblue.lib.umich.edu/bitstream/handle/2027.42/138917/adom201700368_am.pdf?sequence=1

Biomimetic photonic materials with tunable structural colors

JunXuaZhiguangGuo

Journal of Colloid and Interface Science
Volume 406, 15 September 2013, Pages 1-17

https://www.sciencedirect.com/science/article/abs/pii/S0021979713004554

Antibacterial Structural Color Hydrogels

Zhuoyue Chen,† Min Mo,‡ Fanfan Fu,† Luoran Shang,† Huan Wang,† Cihui Liu,† and Yuanjin Zhao

Designing the iridescences of biopolymers by assembly of photonic crystal superlattices

Yu Wang, Meng Li, Elena Colusso, Wenyi Li, Fiorenzo G. Omenetto*

https://onlinelibrary.wiley.com/doi/am-pdf/10.1002/adom.201800066

Structural Colored Gels for Tunable Soft Photonic Crystals

MOHAMMAD HARUN-UR-RASHID, TAKAHIRO SEKI, YUKIKAZU TAKEOKA

The Chemical Record, Vol. 9, 87–105 (2009)
© 2009 The Japan Chemical Journal Forum and Wiley Periodicals, Inc.

Responsive Amorphous Photonic Structures of Spherical/Polyhedral Colloidal Metal–Organic Frameworks

Ling Bai, Yuheng He, Jiajing Zhou, Yun Lim, Van Cuong Mai, Yonghao Chen, Shuai Hou, Yue Zhao, Jun Zhang,* and Hongwei Duan*

Advanced Optical Materials · April 2019

Plasmonic- and dielectric-based structural coloring: from fundamentals to practical applications

Nano Convergence volume 5, Article number: 1 (2018)

https://nanoconvergencejournal.springeropen.com/articles/10.1186/s40580-017-0133-y

Emerging optical properties from the combination of simple optical effects

Grant T Englandand Joanna Aizenberg

Rep. Prog. Phys. 81 (2018) 016402 (12pp)

Artificial selection for structural color on butterfly wings and comparison with natural evolution

Bethany R. Wasika,1, Seng Fatt Liewb,1, David A. Lilienb,1, April J. Dinwiddiea, Heeso Nohb,c, Hui Caob,2, and Antónia Monteiroa,d,e,2

METHOD OF GENERATING STRUCTURAL COLOR

(75) Inventors:SunghoonKwon,Seoul(KR);Hyoki Kim,Seoul(KR)

(73) Assignee:SNUR&DBFoundation,Seoul(KR)

US8,889,234B2 /2014

Coherent light scattering by blue feather barbs

NATURE | VOL 396 | 5 NOVEMBER 1998

How Structural Coloration Gives the Morpho Butterfly Its Gorgeous Iridescent Blue Color

by Lori Dorn on February 11, 2015

Biomimetic Isotropic Nanostructures for Structural Coloration

Jason D. ForsterHeeso NohSeng Fatt LiewVinodkumar SaranathanCarl F. SchreckLin YangJin‐Gyu ParkRichard O. PrumSimon G. J. MochrieCorey S. O’HernHui CaoEric R. Dufresne

Advanced Materials

https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.200903693

Structural color

Harvard

https://manoharan.seas.harvard.edu/structural-color

Structural coloration in nature

Jiyu Sun, Bharat Bhushan and Jin Tong

RSC Advances, 2013, 3, 14862

Structural color printing: full color printing with single ink

Hyoki KimJianping GeJunhoi KimSung-Eun ChoiHosuk LeeHowon LeeWook ParkYadong YinSunghoon Kwon

Proceedings Volume 7609, Photonic and Phononic Crystal Materials and Devices X; 760916 (2010)

https://www.spiedigitallibrary.org/conference-proceedings-of-spie/7609/760916/Structural-color-printing-full-color-printing-with-single-ink/10.1117/12.841420.short?SSO=1

Structural colors in nature: the role of regularity and irregularity in the structure

Shuichi Kinoshita 1Shinya Yoshioka

Chemphyschem 2005 Aug 12;6(8):1442-59

https://pubmed.ncbi.nlm.nih.gov/16015669/

Mechanisms of structural colour in the Morpho butterfly: cooperation of regularity and irregularity in an iridescent scale.

Shuichi KinoshitaShinya Yoshioka, and  Kenji Kawagoe

Proc Biol Sci. 2002 Jul 22;269(1499):1417-21.

https://pubmed.ncbi.nlm.nih.gov/12137569/

Structural Colours in Feathers

Nature volume 112, page243(1923)

https://www.nature.com/articles/112243a0


Angle-independent Structural Coloured Materials inspired by Blue Feather Barbs

Yukikazu TAKEOKA
NIPPON GOMU KYOKAISHI (2014)

Stimuli-responsive opals: colloidal crystals and colloidal amorphous arrays for use in functional structurally colored materials

Yukikazu Takeoka
Journal of Materials Chemistry C (2013)

Angle-independent structural coloured amorphous arrays

Yukikazu Takeoka
Journal of Materials Chemistry (2012)

Full-Spectrum Photonic Pigments with Non-iridescent Structural Colors through Colloidal Assembly

Jin-Gyu Park, Shin-Hyun Kim, Sofia Magkiriadou, Tae Min Choi, Young-Seok Kim, Vinothan N. Manoharan*

Angewandte Chemie International Edition 53(11): 2899 (2014)

https://dash.harvard.edu/bitstream/handle/1/24873725/submitted_version-postprint.pdf?sequence=1

Amorphous Photonic Structures with Brilliant and Noniridescent Colors via Polymer-Assisted Colloidal Assembly

Yang Hu, Dongpeng Yang,* and Shaoming Huang*

ACS Omega 2019, 4, 18771−18779

https://pubs.acs.org/doi/pdf/10.1021/acsomega.9b02734

Viburnum tinus Fruits Use Lipids to Produce Metallic Blue Structural Color

Rox Middleton,1,8,10 Miranda Sinnott-Armstrong,2,9,10 Yu Ogawa,3 Gianni Jacucci,1 Edwige Moyroud,4,5 Paula J. Rudall,6 Chrissie Prychid,6 Maria Conejero,6 Beverley J. Glover,7 Michael J. Donoghue,2 and Silvia Vignolini

In-Plane Direct-Write Assembly of Iridescent Colloidal Crystals

Alvin T. L. Tan, Sara Nagelberg, Elizabeth Chang-Davidson, Joel Tan, Joel K. W. Yang, Mathias Kolle, and A. John Hart

Fabrication of non-iridescent structural color on silk surface by rapid T polymerization of dopamine

Xiaowei Zhu, Biaobiao Yan, Xiaojie Yan, Tianchen Wei, Hongli Yao, Md Shipan Mia, Tieling Xing*, Guoqiang Chen

Bioinspired Stimuli-Responsive Color-Changing Systems

Golnaz Isapour and Marco Lattuada

Advanced Materials 30(19): 1707069

Plasmonic films based on colloidal lithography

Bin Ai a, Ye Yu a, Helmuth Möhwald b, Gang Zhang a,⁎, Bai Yang

Advances in Colloid and Interface Science

Printing a Wide Gamut of Saturated Structural Colors Using Binary Mixtures, With Applications in Anti-Counterfeiting

March 2020

ACS Applied Materials & Interfaces 

https://www.researchgate.net/publication/340326621_Printing_a_Wide_Gamut_of_Saturated_Structural_Colors_Using_Binary_Mixtures_With_Applications_in_Anti-Counterfeiting

Template Synthesis for Stimuli-Responsive Angle Independent Structural Colored Smart Materials

Mohammad Harun-Ur-Rashid1, Abu Bin Imran1, Takahiro Seki1, Yukikazu Takeoka1*, Masahiko Ishii2 and Hiroshi Nakamura2

https://www.jstage.jst.go.jp/article/tmrsj/34/2/34_333/_pdf

Optical Characterization of the Photonic Ball as a Structurally Colored Pigment

Ryosuke Ohnuki,* Miki Sakai, Yukikazu Takeoka, and Shinya Yoshioka

2020

HIGHLY DIFFRACTING, COLORSHIFTING, POLYMERIZED CRYSTALLINE COLLODAL ARRAYS OF HIGHILY CHARGED POLYMER SPHERES, PAINTS AND COATINGS AND PROCESSES FOR MAKING THE SAME

Matti Ben-Moshe, Reut(IL);

Sanford A. Asher, Pitsburgh, PA(US);

Justin J.Bohn, Pitsburgh, PA(US)

US7,902,272B2 /2011

Structural colors: from natural to artificial systems

Yulan Fu,1 Cary A. Tippets,2 Eugenii U. Donev3 and Rene Lopez

WIREs Nanomed Nanobiotechnol 2016

Structural color and its interaction with other color-producing elements: perspectives from spiders

Bor-Kai Hsiung*, Todd A Blackledge, and Matthew D Shawkey
Department of Biology and Integrated Bioscience Program, The University of Akron, Akron, Ohio

Self-assembled colloidal structures for photonics

Shin-Hyun Kim1, Su Yeon Lee2, Seung-Man Yang2* and Gi-Ra Yi3*

Harvard University, USA, KAIST and Chungbuk National University, Korea

Chameleon-Inspired Strain-Accommodating Smart Skin

Yixiao Dong,† Alisina Bazrafshan,† Anastassia Pokutta,‡ Fatiesa Sulejmani,‡ Wei Sun,‡ J. Dale Combs,† Kimberly C. Clarke,† and Khalid Salaita

ACS Nano XXXX, XXX, XXX−XXX

A composite hydrogels-based photonic crystal multi-sensor

Cheng Chen1, Zhigang Zhu1, Xiangrong Zhu1, Wei Yu1, Mingju Liu1, Qiaoqiao Ge1 and Wei-Heng Shih2

Published 16 April 2015 • 
Materials Research ExpressVolume 2Number 4

https://iopscience.iop.org/article/10.1088/2053-1591/2/4/046201/pdf

Template Synthesis for Stimuli-Responsive Angle Independent Structural Colored Smart Materials

Article in Transactions of the Materials Research Society of Japan

February 2009

PATTERNED SILK INVERSE OPAL PHOTONIC CRYSTALS WITH TUNABLE, GEOMETRICALLY DEFINED STRUCTURAL COLOR

US Patent US2019/018731A1

Fiorenzo G.Omenetto, Lexington,MA (US);

YuWang, Medford, MA (US)

Bioinspired colloidal materials with special optical, mechanical, and cell-mimetic functions

Taiji Zhang, Yurong Ma and Limin Qi*

J. Mater. Chem. B, 2013, 1, 251

DYNAMICALLY TUNABLE PLASMONIC STRUCTURAL COLOR

DANIEL FRANKLIN

PhD Thesis 2018

Wetting in Color: Colorimetric Differentiation of Organic Liquids with High Selectivity

Ian B. Burgess,†,* Natalie Koay,‡,§, Kevin P. Raymond,‡,§, Mathias Kolle,† Marko Loncar,† and Joanna Aizenberg†,‡,^,*

Biologically inspired LED lens from cuticular nanostructures of firefly lantern

Jae-Jun Kima, Youngseop Leea, Ha Gon Kimb, Ki-Ju Choic, Hee-Seok Kweonc, Seongchong Parkd, and Ki-Hun Jeong

PNAS | November 13, 2012 | vol. 109 | no. 46

Functional Micro–Nano Structure with Variable Colour: Applications for Anti-Counterfeiting

Hailu Liu , Dong Xie, Huayan Shen, Fayong Li, and Junjia Chen

Hindawi
Advances in Polymer Technology
Volume 2019, Article ID 6519018, 26 pages

REVIEW ARTICLE
515 million years of structural colour

Andrew Richard Parker

J. Opt. A: Pure Appl. Opt. (2000) R15–R28

Colloidal Crystals from Microfluidics

Feika Bian, Lingyu Sun, Lijun Cai, Yu Wang, Yuetong Wang, and Yuanjin Zhao

Small 2019, 1903931

Nanochemistry Chapter 1

Mimicking the colourful wing scale structure of the Papilio blumei butterfly

Mathias Kolle1,2, Pedro M. Salgard-Cunha1, Maik R. J. Scherer1, Fumin Huang1, Pete Vukusic3, Sumeet Mahajan1, Jeremy J. Baumberg1 & Ullrich Steiner

Cambridge Univ

Nature Nanotechnology, 2010, (5) 511-515

Bioinspired bright noniridescent photonic melanin supraballs

Ming Xiao,1* Ziying Hu,2,3* Zhao Wang,4 Yiwen Li,5 Alejandro Diaz Tormo,6 Nicolas Le Thomas,6 Boxiang Wang,7 Nathan C. Gianneschi,2,3,4† Matthew D. Shawkey,8,9† Ali Dhinojwala

Sci. Adv. 2017;3:e1701151 15 September 2017

Structural Color and Odors: Towards a Photonic Crystal Nose Platform

Leonardo da Silva Bonifacio

PhD Thesis 2010

The Self-Assembly of Cellulose Nanocrystals: Hierarchical Design of Visual Appearance

Richard M. Parker, Giulia Guidetti, Cyan A. Williams, Tianheng Zhao, Aurimas Narkevicius, Silvia Vignolini,* and Bruno Frka-Petesic

Adv. Mater. 201830, 1704477

https://onlinelibrary.wiley.com/doi/pdf/10.1002/adma.201704477

Bio-inspired design of multiscale structures for function integration

Kesong Liua, Lei Jiang

A ROBUST SMART FILM :REVERSIBLY SWITCHING FROM HIGH TRANSPARENCY TO ANGLE-INDEPENDENT STRUCTURAL COLOR DISPLAY

US Patent 2018

US2018/024876A1

Inventors:Shu YANG, BlueBel, PA(US);

Deng teng GE, Shanzhai(CN);

Elaine LEE,Brooklyn,NY (US)

https://patentimages.storage.googleapis.com/78/03/19/ade3c5123148cb/US20180244876A1.pdf

Optimization of sharp and viewing-angle-independent structural color

Chia Wei Hsu,1,2,∗ Owen D. Miller,3 Steven G. Johnson,3 and Marin Soljacˇic ́1

Bioinspired living structural color hydrogels

Fanfan Fu, Luoran Shang, Zhuoyue Chen, Yunru Yu, Yuanjin Zhao

SCIENCE ROBOTICS

Measuring and specifying goniochromatic colors

Alejandro Ferrero1, Joaquín Campos1, Esther Perales2, Ana M. Rabal1, Francisco Martínez-Verdú2, Alicia Pons1, Elisabet Chorro2 and M. Luisa Hernanz

Bio-Inspired Photonic Structures: Prototypes, Fabrications and Devices

By Feng Liu, Biqin Dong and Xiaohan Liu

Submitted: November 5th 2011Reviewed: May 28th 2012Published: September 19th 2012

https://www.intechopen.com/books/optical-devices-in-communication-and-computation/bio-inspired-photonic-structures-prototypes-fabrications-and-devices

Photobiology

The Science of Light and Life
  • Lars Olof Björn

https://link.springer.com/book/10.1007/978-1-4939-1468-5

“Guanigma”: The Revised Structure of Biogenic Anhydrous Guanine 

Anna Hirsch,† Dvir Gur,‡ Iryna Polishchuk,§ Davide Levy,§ Boaz Pokroy,§ Aurora J. Cruz-Cabeza,∥ Lia Addadi,*,‡ Leeor Kronik,*,† and Leslie Leiserowitz*,†

Natural photonics 

Pate Vukusic

Stimuli-Responsive Structurally Colored Films from Bioinspired Synthetic Melanin Nanoparticles

Ming Xiao,†,# Yiwen Li,‡,#,○ Jiuzhou Zhao,† Zhao Wang,‡ Min Gao,§ Nathan C. Gianneschi,*,‡ Ali Dhinojwala,*,† and Matthew D. Shawkey

Chem. Mater. 2016, 28, 5516−5521

A Microfluidic Chip with Integrated Colloidal Crystal for Online Optical Analysis

Siew-Kit Hoi, Xiao Chen, Vanga Sudheer Kumar, Sureerat Homhuan, Chorng-Haur Sow, and Andrew A. Bettiol*

Highly monodisperse zwitterion functionalized non-spherical polymer particles with tunable iridescence

Vivek Arjunan Vasantha*aWendy RusliaChen JunhuiaZhao WenguangaKandammathe Valiyaveedu SreekanthbcRanjan Singhbc and Anbanandam Parthiban*a 

 RSC Adv., 2019, 9, 27199-27207

https://pubs.rsc.org/en/content/articlehtml/2019/ra/c9ra05162g

Stimuli-responsive opals: colloidal crystals and colloidal amorphous arrays for use in functional structurally colored materials

Yukikazu Takeoka

J. Mater. Chem. C, 2013, 1, 6059

Biomimetic and Bioinspired Photonic Structures

Wu Yi, Ding-Bang Xiong * and Di Zhang

Nano Adv., 2016, 1, 62–70.

Bio-inspired photonic crystal patterns

Pingping Wu,abJingxia Wang *abc  and  Lei Jiang

https://pubs.rsc.org/no/content/articlelanding/2020/mh/c9mh01389j/unauth#!divAbstract

Stretchable and reflective displays: materials, technologies and strategies

Nano Convergence volume 6, Article number: 21 (2019)

https://nanoconvergencejournal.springeropen.com/articles/10.1186/s40580-019-0190-5

Colloidal Lithography

By Ye Yu and Gang Zhang

2013

https://www.intechopen.com/books/updates-in-advanced-lithography/colloidal-lithography

Structure and mechanical properties of beetle wings: a review 

Jiyu Sun and Bharat Bhushan

RSC Advances, 2012, 2, 12606–12623

A highly conspicuous mineralized composite photonic architecture in the translucent shell of the blue-rayed limpet

Ling LiStefan KolleJames C. WeaverChristine OrtizJoanna Aizenberg & Mathias Kolle 

Nature Communications volume 6, Article number: 6322 (2015) 

https://www.nature.com/articles/ncomms7322/

Fabrication of 3D polymeric photonic arrays and related applications 

A. Yadav a, *, A. Kaushik b, Y. Mishra c, V. Agrawal d, A. Ahmadivan e, K. Maliutina f, Y. Liu g, Z. Ouyang h, W. Dong a, **, G.J. Cheng

Materials Today Chemistry, https://doi.org/10.1016/j.mtchem.2019.100208

Reversible Design of Dynamic Assemblies at Small Scales

Fernando Soto, Jie Wang, Shreya Deshmukh, and Utkan Demirci

Adv. Intell. Syst. 2020, 2000193

https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000193

Biological composites— complex structures for functional diversity.

Eder, M., Shahrouz, A., & Fratzl, P. (2018).

Science, 362(6414), 543-547.

Stimuli-Responsive Optical Nanomaterials

Zhiwei Li, and Yadong Yin

https://onlinelibrary.wiley.com/doi/am-pdf/10.1002/adma.201807061

Bio-Inspired Structural Colors Produced via Self-Assembly of Synthetic Melanin Nanoparticles

Ming Xiao,†,^ Yiwen Li,‡,^ Michael C. Allen,§ Dimitri D. Deheyn,§ Xiujun Yue,‡ Jiuzhou Zhao,† Nathan C. Gianneschi,*,‡ Matthew D. Shawkey,*, and Ali Dhinojwala

ACS Nano 2015

https://pubs.acs.org/doi/pdf/10.1021/acsnano.5b01298

Pigments Based on Colloidal Photonic Crystals

Carlos Israel Aguirre Vélez

PhD Thesis 2010

Structural Colors in Nature: The Role of Regularity and Irregularity in the Structure

Shuichi Kinoshita* and Shinya Yoshioka

ChemPhysChem 2005, 6, 1442 – 1459

Flexible mechanochromic photonic crystals: routes to visual sensors and their mechanical properties

Rui Zhang, Qing Wang  and Xu Zheng

J. Mater. Chem. C, 2018, 6, 3182

Designing visual appearance using a structured surface

VILLADS EGEDE JOHANSEN,1,* LASSE HØJLUND THAMDRUP,2 KRISTIAN SMISTRUP,2 THEODOR NIELSEN,2 OLE SIGMUND,1 AND PETER VUKUSIC

Vol. 2, No. 3 / March 2015 / Optica

Subwavelength nanocavity for flexible structural transmissive color generation with a wide viewing angle

KYU-TAE LEE,1 JI-YUN JANG,2 SANG JIN PARK,2 UJWAL KUMAR THAKUR,2 CHENGANG JI,1 L. JAY GUO,1 AND HUI JOON PARK

Vol. 3, No. 12 / December 2016 / Optica

Color and Texture Morphing with Colloids on Multilayered Surfaces

Ziguang Chen,†,‡,⊥ Shumin Li,†,‡,⊥ Andrew Arkebauer,§ George Gogos,† and Li Tan

ACS Appl. Mater. Interfaces 2015, 7, 10125−10131

https://pubs.acs.org/doi/pdf/10.1021/am5087215

Electrodeposition of Large Area, Angle-Insensitive Multilayered Structural Colors

Chengang Ji,1,† Saurabh Acharya,1,† Kaito Yamada,2 Stephen Maldonado,2,3,* and L. Jay Guo

https://par.nsf.gov/servlets/purl/10111165

Bright and Vivid Diffractive-Plasmonic Structural Colors

Emerson G. Melo,†,‡,§ Ana L. A. Ribeiro,†,‡ Rodrigo S. Benevides,†,‡ Antonio A. G. V. Zuben,†,‡ Marcos V. P. Santos,† Alexandre A. Silva,¶ Gustavo S. Wiederhecker,†,‡ and Thiago P. M. Alegre

2019

Biomimetic photonic structures for optical sensing

Raúl J. Martín-Palmaa, Mathias Kolle

Optics and Laser Technology 109

2019

􏰀􏰁􏰂􏰃􏰄􏰅 􏰇􏰈􏰉 􏰊􏰇􏰅􏰋􏰌 􏰍􏰋􏰄􏰎􏰈􏰏􏰐􏰏􏰑􏰒 􏰓􏰔􏰕 􏰖􏰗􏰔􏰓􏰕􏰘 􏰗􏰙􏰔􏰚􏰀􏰁􏰂􏰃􏰄􏰅 􏰇􏰈􏰉 􏰊􏰇􏰅􏰋􏰌 􏰍􏰋􏰄􏰎􏰈􏰏􏰐􏰏􏰑􏰒 􏰓􏰔􏰕 􏰖􏰗􏰔􏰓􏰕􏰘 􏰗􏰙􏰔􏰚􏰗􏰙􏰙

Colloidal Self-Assembly Concepts for Plasmonic Metasurfaces

Martin Mayer, Max J. Schnepf, Tobias A. F. König,* and Andreas Fery

Adv. Optical Mater. 20197, 1800564

https://onlinelibrary.wiley.com/doi/pdf/10.1002/adom.201800564

Flourishing Smart Flexible Membranes Beyond Paper

Anal. Chem. 2019, 91, 7, 4224–4234

Publication Date:March 18, 2019

https://doi.org/10.1021/acs.analchem.9b00743

https://pubs.acs.org/doi/full/10.1021/acs.analchem.9b00743

Biological vs. Electronic Adaptive Coloration: How Can One Inform the Other?

Eric Kreit1, Lydia M. Mäthger2, Roger T. Hanlon2, Patrick B. Dennis3, Rajesh R. Naik3, Eric Forsythe4 and Jason Heikenfeld1*

Dynamic plasmonic color generation enabled by functional materials

  1. Frank Neubrech
  2. Xiaoyang Duan
  3. Na Liu

Science Advances  04 Sep 2020:
Vol. 6, no. 36, eabc2709
DOI: 10.1126/sciadv.abc2709

https://advances.sciencemag.org/content/6/36/eabc2709

The New Generation of Physical Effect Colorants

Faiz Rahman and Nigel P. Johnson

Optics and Photonics News

2008

https://www.osa-opn.org/home/articles/volume_19/issue_2/features/the_new_generation_of_physical_effect_colorants/

The Japanese jewel beetle: a painter’s challenge

Franziska Schenk1, Bodo D Wiltsand Doekele G Stavenga2

Bioinspir. Biomim. (2013) 045002 (10pp)

Gold bugs and beyond: a review of iridescence and structural colour mechanisms in beetles (Coleoptera)

Ainsley E. Seago1,*, Parrish Brady2, Jean-Pol Vigneron3 and Tom D. Schultz4

Iridescence as Camouflage

Karin Kjernsmo,1,4,* Heather M. Whitney,1 Nicholas E. Scott-Samuel,2 Joanna R. Hall,2 Henry Knowles,1 Laszlo Talas,2,3 and Innes C. Cuthill1

Current Biology

VOLUME 30, ISSUE 3, P551-555.E3, FEBRUARY 03, 2020

https://www.cell.com/current-biology/pdfExtended/S0960-9822(19)31608-2

https://www.cell.com/current-biology/fulltext/S0960-9822(19)31608-2?_returnURL=https%3A%2F%2Flinkinghub.elsevier.com%2Fretrieve%2Fpii%2FS0960982219316082%3Fshowall%3Dtrue

Chromic Phenomena: Technological Applications of Colour Chemistry

Peter Bamfield

Book, Royal Society of Chemistry 2018 edition

Amorphous diamond-structured photonic crystal in the feather barbs of the scarlet macaw

Haiwei Yina,1, Biqin Donga,1, Xiaohan Liua, Tianrong Zhana, Lei Shia, Jian Zia,2, and Eli Yablonovitchb,2

PNAS | July 24, 2012 | vol. 109 | no. 30

Amorphous Photonic Crystals with Only Short-Range Order

Lei Shi, Yafeng Zhang, Biqin Dong, Tianrong Zhan, Xiaohan Liu,* and Jian Zi

Adv. Mater. 201325, 5314–5320

Diamond-structured photonic crystals

Nature Materials  volume 3, pages593–600(2004)

https://www.nature.com/articles/nmat1201

Nano-Optics in the Biological World: Beetles, Butterflies, Birds, and Moths

Mohan Srinivasarao*

Fiber and Polymer Science Program, North Carolina State University, Raleigh, North Carolina 27695-8301

Chem. Rev. 1999, 99, 1935−1961

515 million years of structural colour

Andrew Richard Parker

Department of Zoology, University of Oxford, South Parks Road, Oxford OX1 3PS, UK

E-mail: andrew.parker@zoo.ox.ac.uk

J. Opt. A: Pure Appl. Opt. (2000) R15–R28

Photophysics of Structural Color in the Morpho Butterflies

Shuichi KINOSHITA1,2*, Shinya YOSHIOKA1,2, Yasuhiro FUJII2 and Naoko OKAMOTO

Forma17, 103–121, 2002

Photonic structures in biology

  • October 2004

Peter Vukusic

https://www.researchgate.net/publication/235888153_Photonic_structures_in_biology

Physics of structural colors

S Kinoshita, S Yoshioka and J Miyazaki

Graduate School of Frontier Biosciences, Osaka University, Suita, Osaka 565-0871, Japan

E-mail: skino@fbs.osaka-u.ac.jp

Rep. Prog. Phys. 71 (2008) 076401 (30pp)

https://www.researchgate.net/publication/231075466_Physics_of_structural_colors

Coloration strategies in peacock feathers

Jian Zi*, Xindi Yu, Yizhou Li, Xinhua Hu, Chun Xu, Xingjun Wang, Xiaohan Liu*, and Rongtang Fu

A Review of Electronic Paper Display Technologies from the Standpoint of SID Symposium Digests

Tatsumi Takahashi

Review of Paper-Like Display Technologies

Peng Fei Bai1, Robert A. Hayes1, Ming Liang Jin1, Ling Ling Shui1, Zi Chuan Yi1, L. Wang1, Xiao Zhang1, and Guo Fu Zhou1, 2

Progress In Electromagnetics Research, Vol. 147, 95–116, 2014

Stretchable and reflective displays: materials, technologies and strategies

Nano Convergence volume 6, Article number: 21 (2019)

https://nanoconvergencejournal.springeropen.com/articles/10.1186/s40580-019-0190-5

Review Paper: A critical review of the present and future prospects for electronic paper

Jason Heikenfeld (SID Senior Member) Paul Drzaic (SID Fellow)
Jong-Souk Yeo (SID Member)
Tim Koch (SID Member)

Journal of the SID 19/2, 2011

Biological versus electronic adaptive coloration: how can one inform the other?

Eric Kreit1, Lydia M. Ma ̈thger2, Roger T. Hanlon2, Patrick B. Dennis3, Rajesh R. Naik3, Eric Forsythe4 and Jason Heikenfeld1

J R Soc Interface 10: 20120601.

https://royalsocietypublishing.org/doi/pdf/10.1098/rsif.2012.0601

Transmissive/Reflective Structural Color Filters: Theory and Applications


Yan Yu,1,2 Long Wen,2 Shichao Song,2 and Qin Chen

Volume 2014 |Article ID 212637 | https://doi.org/10.1155/2014/212637

https://www.hindawi.com/journals/jnm/2014/212637/

Interferometric modulator display

https://en.wikipedia.org/wiki/Interferometric_modulator_display

Qualcomm resurrects Mirasol reflective displays with new 576 ppi smartphone panel

https://www.theverge.com/2013/5/22/4354642/high-res-mirasol-display-for-smartphones-demonstrated

Iridescence-controlled and flexibly tunable retroreflective structural color film for smart displays

  • Wen Fan
  • Jing Zeng
  • Qiaoqiang Gan
  • Dengxin Ji
  • Haomin Song
  • Wenzhe Liu
  • Lei Shi
  • Limin Wu

Science Advances  09 Aug 2019:
Vol. 5, no. 8, eaaw8755
DOI: 10.1126/sciadv.aaw8755

https://advances.sciencemag.org/content/advances/5/8/eaaw8755.full.pdf

Artificial Structural Color Pixels: A Review 

by Yuqian Zhao 1Yong Zhao 1,*Sheng Hu 1Jiangtao Lv 1Yu Ying 2Gediminas Gervinskas 3 and Guangyuan Si 

Materials 201710(8), 944; https://doi.org/10.3390/ma10080944

https://www.mdpi.com/1996-1944/10/8/944/htm

Dynamically Tunable Plasmonic Structural Color

Daniel Franklin
University of Central Florida 2018

PHD Thesis

Colors with plasmonic nanostructures: A full-spectrum review 

Applied Physics Reviews 6, 041308 (2019); https://doi.org/10.1063/1.5110051

https://aip.scitation.org/doi/abs/10.1063/1.5110051?journalCode=are

Dynamic plasmonic color generation enabled by functional materials

Frank Neubrech1,2, Xiaoyang Duan1,2, Na Liu3,4*

Bright and Vivid Diffractive–Plasmonic Reflective Filters for Color Generation

  • Emerson G. Melo, 
  • Ana L. A. Ribeiro, 
  • Rodrigo S. Benevides, 
  • Antonio A. G. V. Zuben, 
  • Marcos V. Puydinger dos Santos, 
  • Alexandre A. Silva, 
  • Gustavo S. Wiederhecker, and 
  • Thiago P. M. Alegre*

ACS Appl. Nano Mater. 2020, 3, 2, 1111–1117Publication Date:December 31, 2019 https://doi.org/10.1021/acsanm.9b02508

https://pubs.acs.org/doi/full/10.1021/acsanm.9b02508

Active control of plasmonic colors: emerging display technologies

Kunli Xiong, Daniel Tordera, Magnus Jonsson and Andreas B. Dahlin

Rep Prog Phys. 2019 Feb;82(2):024501.

doi: 10.1088/1361-6633/aaf844.

https://pubmed.ncbi.nlm.nih.gov/30640724/

Self-assembled plasmonics for angle-independent structural color displays with actively addressed black states

Daniel Franklina,b, Ziqian Hec, Pamela Mastranzo Ortegab, Alireza Safaeia,b, Pablo Cencillo-Abadb, Shin-Tson Wuc, and Debashis Chandaa,b,c,1

https://www.pnas.org/content/117/24/13350

Bio-inspired intelligent structural color materials

Luoran Shang, Weixia Zhang, Ke Xuc and Yuanjin Zhao

Mater. Horiz., 2019,6, 945-958 

https://pubs.rsc.org/en/content/articlelanding/2019/mh/c9mh00101h#!divAbstract

Advanced Plasmonic Materials for Dynamic Color Display

DOI: 10.1002/adma.201704338

https://www.researchgate.net/publication/320997060_Advanced_Plasmonic_Materials_for_Dynamic_Color_Display

Polarization-independent actively tunable colour generation on imprinted plasmonic surfaces

Nature Communications volume 6, Article number: 7337 (2015)

https://www.nature.com/articles/ncomms8337

Tunable plasmonic color filter 

Rosanna Mastria, Karl Jonas Riisnaes, Monica Craciun, and Saverio Russo

Frontiers in Optics / Laser Science OSA Technical Digest (Optical Society of America, 2020),paper JTh4B.7•

https://doi.org/10.1364/FIO.2020.JTh4B.7

https://www.osapublishing.org/abstract.cfm?uri=FiO-2020-JTh4B.7

Color Change: In Biology and Smart Pigments Technology

  • Color change due to Pigment
  • Color change due to Structure

This post is on color change due to pigments.

In a future post, I will research structural colors.

Key Words

  • Color Change in Biology
  • Color Change using Technology
  • Smart Pigments
  • Thermochromic property
  • Photochromic property
  • Piezochromic property
  • Solvatochromic property
  • Chimiochromic property
  • Electrochromism
  • Smart Textiles
  • Smart Plastics
  • Smart Paper
  • Smart Inks
  • Smart Food Packaging
  • Color Science
  • Material Science
  • Color Fading
  • Color Fastness
  • Color Metamerism
  • Chromatophores
  • Iridophores
  • Leucophores
  • Chlorophyll
  • Anthrocyanins
  • Flavonols
  • Flavonoids

Color Change and Technology

Chromic phenomena in dyes and pigments

Some of the major companies are

  • LCR Hallcrest LLC
  • Hali Pigment Co. Ltd
  • Chromatic Technologies Inc.
  • QCR Solutions Corp.
  • OliKrom
  • SFXC
  • MICI
  • RPM International Inc.
  • Good Life Innovations Ltd
  • FX Pigments Pvt. Ltd
  • Smarol Industry Co. Ltd
  • Kolortek Co. Ltd
  • Kolorjet Chemicals Pvt. Ltd
  • Colourchange

Source: OliKrom

Smart Hybrid Pigments

The solutions developed by OliKrom involve a new generation of hybrid pigments that combines the proven strength of the metal ions and the flexibility of the molecular material. The change in the structure allow to control the color change as a function of :

  • Temperature (thermochromic property),
  • Light (photochromic property),
  • Pressure (piezochromic property),
  • A solvent (solvatochromic property),
  • A gas (chimiochromic property),

The expertise of OliKrom allows for each of these properties:

  • To adjust the request colors,
  • To obtain reversible and/or irreversible color-shifting,
  • To modulate the speed of the color change,
  • To control the issues of fatigability.
  • To insert these adaptive pigments in a formulation (paint, ink, masterbatch, …) without altering the properties!
  • To produce on an industrial scale paintings, inks, master batches, …

Applications

SAFETY
  • Threshold temperature indicators / industrial pipes, thermal mapping.
  • Display: visual aid in the detection of ice.
  • Indicator of “health matter”, gauge effort, shock detection (Aeronautic & Navy).
  • Control: Temperature Indicator for monitoring sensitive products: cold chain, transport & medical vaccines or blood products.
  • Sterilization indicator: labels or inks.
  • Adhesives: indicator of adhesion, optimum drying.
  • Food Packaging: temperature indicator for the consumption of a product: beer, wine, vodka, champagne, cans and bottles, hot and cold drinks, baby food.
TRACEABILITY / INFRINGEMENT
  • Irreversible overheat indicator of industrial processes.
  • Security inks: offset ink for ticketing, games, secure access badges.
  • Infringement Indicator: branded article, banknote.
DECORATION / MARKETING / ADVERTISING
  • Plastic toys: decor with changing color, labels, packaging, paper / plastic promotional, “dynamic” advertising inserts.
  • Cosmetics: Bottles & Jars of cosmetic or perfume.
  • Smart Textiles: comfort indicator, clarification of the textile with temperature.

Fluorescent Pigments and Phosphorescent Pigments

Source: PHOTOLUMINESCENTS: FLUORESCENT AND PHOSPHORESCENT INKS AND PAINTS / OliKrom

Photochromic Pigments

Piezochromic Pigments

Thermochromic

Type

  • Reversible Thermochromic Material
  • Irreversible Thermochromic Material

Material

  • Liquid Crystal
  • Leuco Dyes
  • Pigment
  • Other Materials

Application

  • Roof Coatings
  • Printing
  • Food Packaging
  • Cosmetics
  • Other Applications

Solvachromes and Chemochromes

Color Change in Biology

Animals
  • Chameleon
  • Golden Tortoise Beetle
  • Mimic Octopus
  • Pacific Tree Frog
  • Sea Horses
  • Flounders
  • Cuttlefish
  • Crab Spiders
  • Squid
  • Cyanea Octopus

Mechanisms for Color Change

  • Chromatophores
  • Leucophores
  • Iridophores

Source: Adaptive camouflage helps blend into the environment 

Cephalopods such as cuttlefish often use use adaptive camouflage to blend in with their surroundings. They are able to match colors and surface textures of their surrounding environments by adjusting the pigment and iridescence of their skin.

On the skin surface, chromatophores (tiny sacs filled with red, yellow, or brown pigment) ab­sorb light of various wavelengths. Once vis­ual input is processed, the cephalopod sends a signal to a nerve fiber, which is connected to a muscle. That muscle relaxes and contracts to change the size and shape of the chromato­phore. Each color chromatophore is controlled by a different nerve, and when the attached muscle contracts, it flattens and stretches the pigment sack outward, expanding the color on the skin. When that muscle relaxes, the chro­matophore closes back up, and the color dis­appears. As many as two hundred of these may fill a patch of skin the size of a pencil eraser, like a shimmering pixel display.

The innermost layer of skin, composed of leuc­ophores, reflects ambient light. These broadband light reflectors give the cephalopods a ‘base coat’ that helps them match their surroundings.

Between the colorful chromatophores and the light-scattering leucophores is a reflective lay­er of skin made up of iridophores. These reflect light to create pink, yellow, green, blue, or silver coloration, while the reflector cells (found only in octopuses) reflect blue or green.

Source: https://www.worldatlas.com/articles/10-animals-that-can-change-colors.html

10 Animals That Can Change Colors

The mimic octopus changes their skin tone and body shape to copy other sea creatures.
The mimic octopus changes their skin tone and body shape to copy other sea creatures. 

There are a few animals that have the unique ability to change colors. The ability to change colors can help animals protect themselves against their predators because it allows them to blend into their natural environment. Here is a list of 10 color changing animals.

10. Chameleon

A chameleon is a unique species of lizard famous for changing its skin color. It does so to camouflage with its surrounding. Sometimes chameleons change their color when they are angry or fearful. To change its color, the chameleon adjusts a layer of specialized cells underlying its skin. Others change color in response to humidity, light, and temperature. Chameleons never stop growing. They keep shedding their skin from time to time. Furthermore, chameleons have excellent eyesight characterized by a 360-degree arc vision. Although chameleons do not hear, their bodies detect sound within the surrounding.

9. Golden Tortoise Beetle

The golden tortoise beetle is an insect that can change its color. The species with this ability include Charidotella sexpunctata and Charidotella egregia. The tortoise beetles change color due to particular events that occur in their environment. Such events include meeting a willing mate and being touched by a curious human being. Hence, when they are mating or agitated, the tortoise beetles change their color from gold to a bright red color. The change of color occurs due to a process referred to as optical illusion.

8. Mimic Octopus

Mimic octopus, scientifically known as Thaumoctopus mimicus, change their color and they can also mimic other sea creatures such as a lionfish, jellyfish, stingrays, and sea snakes. The mimic octopus can pick the color of the sea creature that they intend to mimic. The mimic octopuses change their body shape to avoid potential predators. The change of skin color helps them to adapt to their surrounding. Mimic octopuses can change color and mimic shapes due to their skin which is very responsive to the environment.

7. Pacific Tree Frog

The Pacific Tree Frog inhabits North America. One of its common features is the sticky toe pads. The sticky toe pads enable them to climb trees and plants. The Pacific Tree Frog changes its color to blend in with its surroundings. The change of color is a defense mechanism against predators such as raccoons, bullfrogs, snakes, heron, and many others. Pacific Tree Frogs also change their color based on the seasons and temperature. When the temperatures are high, they turn into a shade of yellow. An example of Pacific Tree Frog species that changes color is Hyla regilla. The process of color change in Pacific Tree Frogs takes 1-2 minutes.

6. Seahorses

Seahorses, such as the thorny seahorse, are among the marine animals that have mastered changing their color. The purpose of changing their skin color is to camouflage, frighten predators, communicate their emotions, and for courtship. Complex interactions between the brain, nervous system, hormones, and organelles make it possible for the seahorses to change their color. The organelles responsible for these color changes are known as chromatophores. Regarding the speed at which the skin color changes, this depends on the stimulus. For instance, in a life or death situation such as involving a predator, the color changes quickly. But whenever the seahorse is courting a mate, the change takes place slowly.

5. Flounders

Flounders are naturally brown. However, they can change color to suit their surroundings. A flounder uses its vision and specialized cells inside the skin to change color. The cells, in turn, have color pigments and are linked to the eyes of the flounders. When a flounder moves to a new environment, the retina in the eyes captures the new color. Consequently, the color seen by the eyes are transmitted to the cells. The cells adjust the pigmentation to match the surface color. Scientists have discovered that flounders depend entirely on their vision to change color. When their eyes are damaged, then they have difficulties in camouflaging to their surrounding. An example of flounder species that changes color is the peacock flounder.

4. Cuttlefish

Cuttlefish are cephalopods that change color to feed on prey and avoid predators craftily. They have three mechanisms by which they can change color. Firstly, the cuttlefish skin contains papillae that alter the tone of the fish. The papillae cause the skin to become smooth or rough depending on the environment. Secondly, camouflaging is possible because of the chromatophores in their skin. The chromatophores are sacs of color pigments. To change color, these sacs receive color-changing instructions from the brain and act accordingly. Lastly, cuttlefish have reflecting plates called leucophores and iridophores. The plates enable the fish to change its color.

3. Crab Spiders

Spiders called flower spiders (or crab spiders) change their color. They usually change color to hide from their prey. Consequently, the spiders change color to resemble the flower surface on which they sit through the reflection of light. Some spiders release a yellow pigment that enhances their color changing process. An example of a species of spider with such color changing features is Misumenoides formosipes and Misumena vatia. The color change from white to yellow takes 10-25 days. Hence, the flower spiders patiently wait for the completion of the process before they can attack their prey.

2. Squid

Squids are marine cephalopods. They possess two long tentacles and eight arms. An interesting fact about the squids is that their blood is blue. Furthermore, they have three hearts instead of one like other fish. The squids are uniquely beautiful and able to change color. They change color using chromatophores engraved in their skin. The purpose of changing color is to match the surface they are on so that they can avoid predators. The camouflage also acts as a hunting tactic since it enables them to hide away from their prey.

1. Cyanea Octopus

Known as the big blue octopus or the day octopus, octopus cyabea is found in the waters of the Indo-Pacific. It is known as the day octopus as it is most active during the daytime in contrast to most other octopus species. The cyanea octopus is especially adept at camouflage, able to not only frequently change the color of their skin, but also recreate patterns and textures. On the hunt for crabs, molluscs, shrimp, and fish, the cyanea octopus is able to quickly adapt its appearance to its surroundings, even mimicking moving shadows such as overhead clouds.

Color Change in Plants And Flowers

Color change in Leaves and Flowers

  • Chlorophyll – Green
  • Cartenoids – Xanthophylls – Yellow as in Corn
  • Cartenoids – Carotenes – Orange as in Carrots
  • Anthrocyanins – Blueberries and Cherries – Blue, purple, red, pink
  • Flavonols – Pale yellows and whites

Plants change colors

  • Change in Heat
  • Change in pH
  • During the Fall
  • During the day

Color Fading and Color Metamerism are also important problems but are not discussed in this post.

Source: The science behind why leaves change color in autumn

A rainbow of autumn colors

The green color of chlorophyll is so strong that it masks any other pigment. The absence of green in the fall lets the other colors come through. Leaves also contain the pigments called carotenoids; xanthophylls are yellow (such as in corn) and carotenes are orange (like in carrots). Anthocyanins (also found in blueberries, cherries) are pigments that are only produced in the fall when it is bright and cold. Because the trees cut off most contact with their leaves at this point, the trapped sugar in the leaves’ veins promotes the formation of anthocyanins, which are used for plant defense and create reddish colors.

However, trees in the fall aren’t just yellow and red: they are brown, golden bronze, golden yellow, purple-red, light tan, crimson, and orange-red. Different trees have different proportions of these pigments; the amount of chlorophyll left and the proportions of other pigments determine a leaf’s color. A combination of anthocyanin and chlorophyll makes a brown color, while anthocyanins plus carotenoids create orange leaves.

Source: The science behind why leaves change color in autumn

Source:https://www.gardeningknowhow.com/ornamental/flowers/hibiscus/hibiscus-turning-different-color.htm

Can Hibiscus Change Color: Reasons For Hibiscus Turning A Different Color

07/20/20

Can hibiscus change color? The Confederate Rose (Hibiscus mutabilis) is famous for its dramatic color changes, with flowers that can go from white to pink to deep red within one day. But almost all hibiscus varieties produce flowers that can change colors under certain circumstances. Read on to learn more.

Reasons for Color Changing in Hibiscus

If you’ve ever noticed the flowers on your hibiscus turning a different color, you’ve probably wondered what was behind the change. To understand why this happens, we need to look at what creates flower colors in the first place.

Three groups of pigments create the vibrant color displays of hibiscus flowers. Anthocyanins produce blue, purple, red, and pink colors, depending on the individual pigment molecule and the pH it is exposed to. Flavonols are responsible for pale yellow or white colors. Carotenoids create colors on the “warm” side of the spectrum – yellows, oranges, and reds.

Each hibiscus variety has its own genetics that determine what pigments, and what range of colors it can produce. However, within that range, temperature, sunlight, pH, and nutrition can all affect the levels of different pigments in a flower and what color they appear.

The blue- and red-colored anthocyanins are water-soluble pigments carried in plant sap. Meanwhile, the red, orange and yellow carotenoids are fat-soluble pigments created and stored in the plastids (compartments in plant cells similar to the chloroplasts that carry out photosynthesis). Therefore, anthocyanins are less protected and more sensitive to environmental changes, while carotenoids are more stable. This difference helps explain the color changes in hibiscus.

Anthocyanins exposed to hot conditions will often break down, causing flower colors to fade, while carotenoid-based colors hold up well in the heat. High temperatures and bright sunlight also enhance carotenoid production, leading to bright reds and oranges.

On the other hand, plants produce more anthocyanins in cold weather, and the anthocyanins they produce tend to be more red- and pink-colored as opposed to blue or purple. For this reason, some anthocyanin dependent hibiscus flowers will produce brilliant color displays during cool weather or in partial shade, but will fade in bright, hot sunlight.

Similarly, flavonols exposed to high temperatures will fade from yellow to white, while cold weather will cause an increase in production and a deepening of yellow flower colors.

Other Factors in Hibiscus Color Change

Some anthocyanin pigments will change color depending on the pH they’re exposed to within the flower. The pH doesn’t usually change over time within a hibiscus flower because it is determined genetically, but patches of different pH levels can lead to multiple colors occurring within one flower.

Nutrition is also a factor in color changes. Adequate sugar and protein in the sap are required for anthocyanin production. Making sure your plant has enough fertility and nutrients is important for vibrant colors in anthocyanin dependent flowers.

So, depending on its variety, your hibiscus changed color because of some combination of temperature, sunlight, nutrition, or pH has taken place. Can gardeners control this hibiscus color change? Yes, indirectly – by controlling the plant’s environment: shade or sun, good fertility, and protection from hot or cold weather.

Source: https://www.loc.gov/everyday-mysteries/botany/item/what-causes-flowers-to-have-different-colors/

What causes flowers to have different colors?

Answer

Anthocyanins and carotenoids… plus some other things.

Flowers come in all shapes and sizes, but what makes them truly stand apart from each other is their vibrant colors.  These colors are made up of pigments and, generally speaking, the fewer the pigments, the lighter the color.  The most common pigments in flowers come in the form of anthocyanins.  These pigments range in color from white to red to blue to yellow to purple and even black and brown.  A different kind of pigment class is made up of the carotenoids.  Carotenoids are responsible for some yellows, oranges, and reds.  (These little guys are what cause the brilliant colors of autumn leaves!)  While many flowers get their colors from either anthocyanins or carotenoids, there are some that can get their colors from a combination of both.

Anthocyanins and carotenoids are the main sources of flower coloration, but there are other factors that can affect how colors present themselves.  The amount of light flowers receive while they grow, the temperature of the environment around them, even the pH level of the soil in which they grow can affect their coloration.  Another factor is stress from the environment.  This stress can include a drought or a flood or even a lack of nutrition in the soil, all of which can dampen the coloration of flowers.  And then, of course, there is the visual that the eye and brain form together: humans can, for the most part, view all colors in the visible spectrum, BUT every human perceives color differently, so a red rose may appear more vibrant to one person while it appears more muted to another.  Beauty (and color!) is in the eye of the beholder.

My Related Posts

Digital Color and Imaging

Color and Imaging in Digital Video and Cinema

On Light, Vision, Appearance, Color and Imaging

On Luminescence: Fluorescence, Phosphorescence, and Bioluminescence

Key Sources of ResearCH

Photochromic and Thermochromic Colorants in Textile Applications

M. A. Chowdhury, M. Joshi and B. S. Butola

https://journals.sagepub.com/doi/pdf/10.1177/155892501400900113

THE CHEMISTRY & PHYSICS OF
SPECIAL EFFECT PIGMENTS & COLORANTS

A. NURHAN BECIDYAN

President
UNITED MINERAL & CHEMICAL CORPORATION

PHOTOLUMINESCENTS: FLUORESCENT AND PHOSPHORESCENT INKS AND PAINTS

Structural colour and iridescence in plants: the poorly studied relations of pigment colour

Beverley J. Glover1,* and  Heather M. Whitney2

https://www.ncbi.nlm.nih.gov/pmc/articles/PMC2850791/

Analysing photonic structures in plants 

Silvia Vignolini1,2, Edwige Moyroud3, Beverley J. Glover3 and Ullrich Steiner1

1Cavendish Laboratory, University of Cambridge, JJ Thomson Avenue, Cambridge CB3 0HE, UK 2Department of Physics and Astronomy, University College London, Gower Street, London WC1E 6BT, UK 3Department of Plant Sciences, University of Cambridge, Downing Street, Cambridge CB2 3EA, UK

The Mechanism of Color Change in the Neon Tetra Fish: a Light‐Induced Tunable Photonic Crystal Array

Dvir Gur 1 , Benjamin A Palmer 1 , Ben Leshem 2 , Dan Oron 2 , Peter Fratzl 3 , Steve Weiner 1 , Lia Addadi 4

First published: 27 April 2015

https://pubmed.ncbi.nlm.nih.gov/25914222/

10 Animals that can Change Colors

https://www.worldatlas.com/articles/10-animals-that-can-change-colors.html

How Octopuses and Squids Change Color

https://ocean.si.edu/ocean-life/invertebrates/how-octopuses-and-squids-change-color

Why color-changing animals alter their appearance

By Zach Fitzner

Earth.com staff writer

Iridophores and their interactions with other chromatophores are required for stripe formation in zebrafish

Hans Georg Frohnhöfer, Jana Krauss, Hans-Martin Maischein, Christiane Nüsslein-Volhard

Development  2013  140: 2997-3007;  doi: 10.1242/dev.096719

https://dev.biologists.org/content/140/14/2997.article-info

Magic Traits in Magic Fish: Understanding Color Pattern Evolution Using Reef Fish

Author links open overlay panelPaulineSalis1ThibaultLorin2VincentLaudet1BrunoFrédérich3

https://www.sciencedirect.com/science/article/abs/pii/S0168952519300162

Developmental and comparative transcriptomic identification of iridophore contribution to white barring in clownfish. 

https://www.x-mol.com/paper/959131

Rapid integumental color changes due to novel iridophores in the chameleon sand tilefish Hoplolatilus chlupatyi

Makoto Goda

First published: 13 February 2017 https://doi.org/10.1111/pcmr.12581

https://onlinelibrary.wiley.com/doi/abs/10.1111/pcmr.12581

Flashing Tilefish’s Color Changing Skin is Unique in the Animal World

Top 10 Colour Changing Animals Around the World

Chameleon-Inspired Variable Coloration Enabled by a Highly Flexible Photonic Cellulose Film

  • Ze-Lian Zhang, 
  • Xiu Dong, 
  • Yi-Ning Fan, 
  • Lu-Ming Yang, 
  • Lu He, 
  • Fei Song*
  • Xiu-Li Wang, and 
  • Yu-Zhong Wang*

Cite this: ACS Appl. Mater. Interfaces 2020, 12, 41, 46710–46718Publication Date:September 23, 2020

https://pubs.acs.org/doi/10.1021/acsami.0c13551

The secret to chameleon color change: Tiny crystals

By Robert F. ServiceMar. 10, 2015 

https://www.sciencemag.org/news/2015/03/secret-chameleon-color-change-tiny-crystals

Amazing Octopus Color Transformation | National Geographic

How do Octopuses Change Color?

Here’s everything you ever wanted to know about chromatophores.

Study demonstrates that octopus’s skin possesses same cellular mechanism for detecting light as its eyes do

by  University of California – Santa Barbara

https://phys.org/news/2015-05-octopus-skin-cellular-mechanism-eyes.html

Progress and Opportunities in Soft Photonics and Biologically Inspired Optics

Mathias KolleSeungwoo Lee

First published: 23 October 2017

https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.201702669

https://pubmed.ncbi.nlm.nih.gov/29057519/

https://onlinelibrary.wiley.com/doi/am-pdf/10.1002/adma.201702669

Bioinspired living structural color hydrogels

Fanfan Fu, Luoran Shang, Zhuoyue Chen, Yunru Yu, Yuanjin Zhao

Smart pigments with reactive nanocolors printed on paper and flexibles

2009 International Conference on Nanotechnology for the Forest Products Industry

https://www.tappi.org/content/events/09nano/papers/09nan23.pdf

Thermochromic Material

https://www.sciencedirect.com/topics/engineering/thermochromic-material

Color Changing Plastics for Food Packaging

By

Lizanel Feliciano
Ohio State University, Columbus, Ohio

Smart dyes for medical and other textiles

  • February 2007

DOI: 10.1533/9781845692933.1.123

Tatjana Rijavec, Sabina Bračko

University of Ljubljana

https://www.researchgate.net/publication/288402591_Smart_dyes_for_medical_and_other_textiles

Thermochromic colors in textiles

S. Periyasamy, Gaurav Khanna

https://www.fibre2fashion.com/industry-article/3059/thermochromic-colors-in-textiles

“Smart” fluorescent dyes change color in different solid states

Aug 21st, 2018

https://www.laserfocusworld.com/lasers-sources/article/16571232/smart-fluorescent-dyes-change-color-in-different-solid-states

Materials that Change Color

Smart Materials, Intelligent Design
  • Marinella Ferrara
  • Murat Bengisu

https://link.springer.com/book/10.1007%2F978-3-319-00290-3#about

Switching Colors with Electricity

BY  ROGER J. MORTIMER

American Scientist

JANUARY-FEBRUARY 2013

VOLUME 101, NUMBER 1

https://www.americanscientist.org/article/switching-colors-with-electricity

Smart textiles change colour on demand


Friday, 13 May 2016

https://portal.engineersaustralia.org.au/news/smart-textiles-change-colour-demand

Design Concepts for a Temperature-sensitive Environment Using Thermochromic Colour Change

Robert M Christie, Sara Robertson and Sarah Taylor

Colour: Design & Creativity (2007) 1 (1): 5, 1–11

Smart responsive phosphorescent materials for data recording and security protection

Huibin Sun1,2,􏰀, Shujuan Liu1,􏰀, Wenpeng Lin1, Kenneth Yin Zhang1, Wen Lv1, Xiao Huang2, Fengwei Huo2, Huiran Yang1, Gareth Jenkins1,2, Qiang Zhao1 & Wei Huang1,2

Received 21 Oct 2013 | Accepted 10 Mar 2014 | Published 7 April 2014

NATURE COMMUNICATIONS 

https://www.nature.com/articles/ncomms4601.pdf?origin=ppub

Anthocyanin food colorant and its application in pH-responsive color change indicator films

Swarup Roy & Jong-Whan Rhim (2020)

Critical Reviews in Food Science and Nutrition,

DOI: 10.1080/10408398.2020.1776211

Smart monitoring of gas/temperature changes within food packaging based on natural colorants

COMPREHENSIVE REVIEWS IN FOOD SCIENCE AND FOOD SAFETY

2020;19:2885–2931.

DOI: 10.1111/1541-4337.12635

https://onlinelibrary.wiley.com/doi/pdfdirect/10.1111/1541-4337.12635

Smart textiles: an overview of recent progress on chromic textiles

Heloisa Ramlow Karina Luzia Andrade  & Ana Paula Serafini Immich 

Pages 152-171 | Received 20 Feb 2019, Accepted 24 Oct 2019, Published online: 29 Jun 2020

The Journal of The Textile Institute Volume 112, 2021 – Issue 1

https://www.tandfonline.com/doi/abs/10.1080/00405000.2020.1785071

Anthocyanin – A Natural Dye for Smart Food Packaging Systems

Suman Singh1, Kirtiraj K. Gaikwad2, and Youn Suk Lee3*

https://www.semanticscholar.org/paper/Anthocyanin-–-A-Natural-Dye-for-Smart-Food-Systems-Singh-Forestry/4f41ec48d77d61bc05decd7738a672f414f9b2db?p2df

Critical Review on Smart Chromic Clothing

Esraa El-Khodary1, Bahira Gebaly2, Eman Rafaat2, Ahmed AlSalmawy2

Colorimetric properties of reversible thermochromic printing inks

Rahela Kulcar a, Mojca Friskovec b, Nina Hauptman c, Alenka Vesel d, Marta Klanjsek Gunde

Dyes and Pigments 86 (2010) 271e277

Designing Smart Textiles Prints with Interactive Capability

Prof. Hoda Abdel Rahman Mohamed El-Hadi 1 ,Prof. Sherif Hassan Abdel Salam 2 Eng. Kholoud Hassan Mohamed Mahmoud

Smart Chromic Colorants Draw Wide Attention for the Growth of Future Intelligent Textile Materials

Amit Sengupta#& Jagadananda Behera

Wool Research Association, Thane, India

LEUCO DYE-BASED THERMOCHROMIC INKS: RECIPES AS A GUIDE FOR DESIGNING TEXTILE SURFACES

MARJAN KOOROSHNIA Swedish School of Textiles

Relation between colour- and phase changes of a leuco dye-based thermochromic composite

Scientific Reports volume 8, Article number: 5511 (2018)

https://www.nature.com/articles/s41598-018-23789-2

The Chemistry and Physics of Special-Effect Pigments and Colorants for Inks and Coatings

Paints and Coatings

2003

https://www.pcimag.com/articles/85016-the-chemistry-and-physics-of-special-effect-pigments-and-colorants-for-inks-and-coatings

THERMOCHROMIC MATERIAL MARKET

https://www.mordorintelligence.com/industry-reports/thermochromic-material-market

QCR Solutions Corp

OliKrom

The Effective Use of Interference and Polychromatic Colorants

https://www.pcimag.com/articles/102445-the-effective-use-of-interference-and-polychromatic-colorants

White reflection from cuttlefish skin leucophores

Cephalopod Camouflage: Cells and Organs of the Skin

https://www.nature.com/scitable/topicpage/cephalopod-camouflage-cells-and-organs-of-the-144048968/

Chromatophore Organs, Reflector Cells, Iridocytes and Leucophores in Cephalopods

RICHARD A. CLONEY AND STEVEN L. BROCCO

Mechanisms and behavioural functions of structural coloration in cephalopods

Lydia M. Ma ̈thger1,2,3,*,†, Eric J. Denton3,‡, N. Justin Marshall2 and Roger T. Hanlon1

J. R. Soc. Interface (2009) 6, S149–S163

Cephalopod Camouflage: Cells and Organs of the Skin

https://www.nature.com/scitable/topicpage/cephalopod-camouflage-cells-and-organs-of-the-144048968/

Chromatophore

https://en.wikipedia.org/wiki/Chromatophore

Leucophores are similar to xanthophores in their specification and differentiation processes in medaka

https://www.researchgate.net/publication/262111984_Leucophores_are_similar_to_xanthophores_in_their_specification_and_differentiation_processes_in_medaka

Identification and Characterization of Highly Fluorescent Pigment Cells in Embryos of the Arabian Killifish (Aphanius Dispar)

On leucophores and the chromatic unit of Octopus vulgaris

D. Froesch1J. B. Messenger2

https://zslpublications.onlinelibrary.wiley.com/doi/pdf/10.1111/j.1469-7998.1978.tb03363.x

Adaptive camouflage helps blend into the environment 

Cuttlefish

https://asknature.org/strategy/adaptive-camouflage-helps-blend-into-the-environment/

Identification of kit-ligand a as the Gene Responsible for the Medaka Pigment Cell Mutant few melanophore

THE SECRET OF A SQUID’S ABILITY TO CHANGE COLORS MAY LIE IN AN UNEXPECTED SPARKLE ON ITS SKIN

INVISIBILITY IS (ALMOST) POSSIBLE WHEN HUMAN CELLS ARE MERGED WITH SQUID GENES

https://www.syfy.com/syfywire/human-cells-merged-with-squid-invisibility-trait

How Cephalopods Change Color

By Dr. James Wood and Kelsie Jackson

ELECTRONIC PAPER DISPLAYS: Kindles and cuttlefish: Biomimetics informs e-paper displays

https://www.laserfocusworld.com/detectors-imaging/article/16549524/electronic-paper-displays-kindles-and-cuttlefish-biomimetics-informs-epaper-displays

Skin paterning in Octopus vulgaris and its importance for camouflage

Iridophores and Not Carotenoids Account for Chromatic Variation of Carotenoid-Based Coloration in Common Lizards ( Lacerta vivipara ).

Biological vs. Electronic Adaptive Coloration: How Can One Inform the Other?

Eric Kreit1, Lydia M. Mäthger2, Roger T. Hanlon2, Patrick B. Dennis3, Rajesh R. Naik3, Eric Forsythe4 and Jason Heikenfeld1*

The Chemistry of Biological Camouflage

https://www.chemistryislife.com/the-chemistry-of-biological-camouflage

Mechanisms and behavioural functions of structural coloration in cephalopods

https://espace.library.uq.edu.au/view/UQ:170626

Sepiida algorithm for solving optimal reactive power problem

Are You Ready for Plants That Change Color?

Why Leaves Change Color

https://www.esf.edu/pubprog/brochure/leaves/leaves.htm

Can Hibiscus Change Color: Reasons For Hibiscus Turning A Different Color

https://www.gardeningknowhow.com/ornamental/flowers/hibiscus/hibiscus-turning-different-color.htm

What causes flowers to have different colors?

https://www.loc.gov/everyday-mysteries/botany/item/what-causes-flowers-to-have-different-colors/

The science behind why leaves change color in autumn

Why has my plant’s flower changed colour?

Why Does Cannabis Change Colors?

https://cannabis.net/blog/strains/why-does-cannabis-change-colors

A cyborg plant with color-changing leaves? Scientists just rose to the challenge.

https://www.washingtonpost.com/news/speaking-of-science/wp/2015/11/23/a-cyborg-plant-with-color-changing-leaves-scientists-just-rose-to-the-occasion/

Color-changing plants detect pollutants and explosives

https://newatlas.com/color-changing-plants-detect-pollutants-and-explosives/17915/

The Color Genes of Speciation in Plants

Daniel Ortiz-Barrientos1

Genetics. 2013 May; 194(1): 39–42.
doi: 10.1534/genetics.113.150466

https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3632479/

Guide to Fall Colors in Upstate New York

Donald J. Leopold
Chair, Department of Environmental and Forest Biology and Distinguished Teaching Professor
SUNY-ESF, Syracuse

The plants that change colour through the seasons

https://www.stuff.co.nz/life-style/home-property/nz-gardener/76979012/the-plants-that-change-colour-through-the-seasons

Colours of plants and animals

https://www.itp.uni-hannover.de/fileadmin/arbeitsgruppen/zawischa/static_html/botzooE.html

On Luminescence: Fluorescence, Phosphorescence, and Bioluminescence

Key Words

  • Photoluminescence
  • Fluorescence
  • Phosphorescence
  • Chemiluminescence
  • Luminescence
  • Incandescence
  • Spectrophotometer
  • Spectrofluorophotometer
  • Bioluminescence
  • Chemluminescence
  • Mechnoluminescence
  • Thermoluminescnce
  • Sonoluminescence
  • Electroluminescence
  • Daylight Fluorescent dyes
  • UV Fluorescent Dyes
  • Angle dependent Pigments in coatings
  • Optical Effects
  • Opalescence
  • Iridescence
  • Pearlescence
  • Adularescence
  • Labradorescence
  • Aventurescence
  • GonioSpectrometers
  • Multi Angle Spectrophotometers

There are many forms of energy which selected luminescent pigments can absorb and convert to luminescence, e.g. radioactive (radioluminescence); X-ray (Roentgenoluminescence); cathode ray (cathodoluminescence); mechanical (triboluminescence); electrical (electroluminescence); heat -after previous storage of energy (thermoluminescence); and Ultraviolet (UV) visible and Infrared (IR) (photoluminescence).

Luminescence Vs Incandescence

  • Incandescence
  • Luminescence
    • Bioluminescence
    • Photoluminescence
      • Fluorescence
      • Phosphorescence

Source:

Source:

Source: Introduction/Molecular Fluorescence: Principles and Application

Source: FLUORESCENCE AND PHOSPHORESCENCE

Source: Introduction/Molecular Fluorescence: Principles and Application

Bioluminescence

Please see references listed below for examples of bioluminescence.

  • In plants
    • Reviewing the relevance of fluorescence in biological systems
    • PLANTS WITH SELF-SUSTAINED LUMINESCENCE
  • In ocean Life
    • BIOLUMINESCENCE IN THE SEA
  • Fireflies
    • RESURRECTING THE ANCIENT GLOW OF THE FIREFLIES

Photoluminescence

  • Fluorescence
  • Phasphorescence

Source: Fluorescence and Phosphorescence

Jablonski Diagram – Molecular States

Source: Fluorescence and Phosphorescence

Source: Fluorescence and Phosphorescence

Fluorescence

Types of Fluorescence

  • Daylight
  • UV

Fluorescent Dyes and Pigments

Source: Fluorescent Dyes and Pigments

1.Introduction
2.Naphthalimide Dyes
3.Coumarin Dyes
4.Xanthene Dyes
5.Thioxanthene and Benzoxanthene Dyes
6.Naphtholactam, Hydrazam Dyes and Homologues
7.Azlactone Dyes
8.Methine Dyes
9.Oxazine and Thiazine Dyes
10.Miscellaneous Fluorescent Dyes
11.UV Fluorescent Chromophores with No or Low Body Color
12.Special Uses
13.Daylight Fluorescent Pigments
13.1.Production
13.1.1.Dyes for Daylight Fluorescent Pigments
13.1.2.Pigment Matrices
13.1.3.Formaldehyde‐Free and Solvent Resistant Fluorescent Pigments
13.1.4.Sunlight Sensors
13.1.5.Fluorescent Modifications with Covalently Bound Dyes
13.1.6.More ‐ Not Resinated ‐ Solid‐State Fluorescent Pigments
13.2.Quality Specifications of Fluorescent Pigments
13.3.Applications of Fluorescent Pigments
13.4.Toxicology

Industrial Applications of Fluorescence

  • Paper
  • Plastics
  • Paints
  • Textiles
  • Printing Inks
  • Laudary Detergent

In Paper Industry

  • Disulfonated OBA – used in wetend of paper machines
  • Tetrasulfonated OBA – surface coating in size press for standard whiteness
  • Hexasulfonated OBA- for high whiteness

Optical brightening agents in paper

Posted on April 6, 2018 by admin

Optical brightening agents are additives which are used in the paper industries to enhance whitening effects of papers. These chemical compounds absorb light in the ultraviolet and violet region (usually 340-370nm) and re-emit light in the blue region (typically 420-470 nm). It gives a fluorescent effect that masks the inherent yellowness of the fiber and enhances the brightness of the paper product. They not only used in paper but also used in plastics, textiles, laundry detergents. They are also known as optical brighteners, artificial whiteners. It is one kind of coating agent.

The optical brighteners can be applied in either the wet end or dry end or both end. If you want to internal brightness then you have to add them to the stock in wet end. Many paper manufactures use them in dry end at the size press or calender stack as surface coating. The dry end application is more economical compare to the wet end because in the dry end the chemical are used on the outer surface fiber in lieu of whole fiber content for reflects the ultraviolet light. However some manufacturers use a combination treatment; they use both the wet and dry end. 

Types of optical brightening agents

The optical brighteners that are used in paper industries can be sort into three types based on the sulfonic groups. All of them contain stilbene structure.

Disulfonated OBAs

This OBAs contains two sulphonic groups. They are hydrophobic and have a very good affinity. The solubility is very low. Normally it is used in wet end.

Tetrasulfonated types

This OBAs contains four sulphonic groups. It has medium affinity and good solubility so ideal for paper industries both in wet end and dry end. They are suitable for neutral or alkaline pH medium. It is most common type of OBAs that are used in paper and paper board.

Hexasulfonated OBAs

hexasulfonated OBAs contains six sulphonic groups. It is special type of brightener which has excellent solubility. Mostly it is used in those papers where high brightness is required such as photographic paper. They are used in dry end as coating.

Optical brightener’s chemistry

We know that optical brightening agents are stilbene derivatives. The stilbene is a diphenylethene which consist two stereo-isomer – trans-isomer and cis-isomer. Between these two configurations, the trans-isomer can exhibits strong fluorescence whereas the cis-isomer does not exhibit fluorescence. The trans configuration is more stable than cis configuration but when the uv light applied on the trans configuration then it become electronically exited and converted into cis configuration. Consequently the fluorescence phenomenon occurs in. The visible blue light effectively neutralizes the cream color or yellowish hue of the paper fiber.

Disadvantage

All the optical brightening agents are dyestuffs. As like most of the other colorants they also degraded by oxygen in air slowly. So after several years or months, the increasing brightness of the paper with optical brighteners will decrease. As a result the printed paper will not look good. Thus some people does not like print on the paper with artificial brightness. Similarly it is not useful in photographic or art applications. On the other hand in some places or some printers the OBAs would not work. Therefore the paper will appear its normal brightness. This is the reason why some printed papers have a yellowish hue. Although the OBAs are efficient on bleached chemical pulps but it is ineffective on unbleached pulp due to lignin is also an ultraviolet absorbing agent.

Finally

Normally the consumers expect higher brightness paper and paper boards. But all the time the brightness of pulp and fillers cannot fulfill the targeted brightness. Therefore the manufactures use different type of optical brightening agents. Most of the paper manufacturers add these chemicals in order to make paper appear brighter.

Source: The issues of Optical Brightening Agents in paper and ink

Industrial Testing and Measurements

Source: Fluorescence and Phosphorescence

Source: Fluorescence and Phosphorescence

Source: Fluorescence and Phosphorescence

Source: Fluorescence and Phosphorescence

Fluorescence Prediction and Control

Please see my post related to Color and Fluorescence Meaurement, Prediction and Control.

On Light, Vision, Appearance, Color and Imaging

There are also several references in the list below which describe fluorescence measurement, prediction, and control in more detail. Papers by LG Coppel describe fluorescence modelling. Papers by Tarja Shakespeare describe fluorescence modeling and control online on paper machines.

My Related Posts

Digital Color and Imaging

Color and Imaging in Digital Video and Cinema

On Light, Vision, Appearance, Color and Imaging

Key Sources of Research

Constructing Models to Explain Photoluminescence

Fluorescence, Phosphorescence, and Chemiluminescence

Noureen Siraj,† Bilal El-Zahab,‡ Suzana Hamdan,† Tony E. Karam,† Louis H. Haber,† Min Li,§
Sayo O. Fakayode,∥ Susmita Das,⊥ Bertha Valle,⊗ Robert M. Strongin,○ Gabor Patonay,#
Herman O. Sintim,× Gary A. Baker,$ Aleeta Powe,¶ Mark Lowry,○ Jan O. Karolin,& Chris D. Geddes,& and Isiah M. Warner*,†

Anal. Chem. 2016, 88, 170−202

Reviewing the relevance of fluorescence in biological systems

https://pubs.rsc.org/en/content/getauthorversionpdf/c5pp00122f

Pigments, dyes and fluorescent brightening agents for plastics: An overview

Robert M. Christie

First published: August 1994

https://onlinelibrary.wiley.com/doi/abs/10.1002/pi.1994.210340401

FLUORESCENT DYES FOR PAPER DYEING

Inventor: Helmut-MartinMeier,Ratingen(DE)

Assignee: KemiraGermanyGmbH,Leverkusen (DE)

Photochromic and Thermochromic Colorants in Textile Applications

M. A. Chowdhury, M. Joshi and B. S. Butola

https://journals.sagepub.com/doi/pdf/10.1177/155892501400900113

THE CHEMISTRY & PHYSICS OF
SPECIAL EFFECT PIGMENTS & COLORANTS

A. NURHAN BECIDYAN

President
UNITED MINERAL & CHEMICAL CORPORATION

Luminescence Phenomena: An Introduction

K.V.R. Murthy

Hardev Singh Virk

https://www.researchgate.net/publication/271866484_Luminescence_Phenomena_An_Introduction

Introduction

Molecular Fluorescence: Principles and Applications, Second Edition. Bernard Valeur,
Mário Nuno Berberan-Santos.
© 2013 Wiley-VCH Verlag GmbH & Co. KGaA. Published 2013 by Wiley-VCH Verlag GmbH & Co. KGaA.

A Brief History of Fluorescence and Phosphorescence before the Emergence of Quantum Theory

Bernard Valeur*,† and Mario N. Berberan-Santos*,‡

Plants with self-sustained luminescence

Tatiana Mitiouchkina et all

Bioluminescence in the Sea

Steven H.D. Haddock,1 Mark A. Moline,2 and James F. Case3

Resurrecting the ancient glow of the fireflies

PHOTOLUMINESCENTS: FLUORESCENT AND PHOSPHORESCENT INKS AND PAINTS

An Introduction to Fluorescence Spectroscopy

Fluorescence Spectroscopy

Molecular Fluorescence, Phosphorescence, and Chemiluminescence Spectrometry

https://pubs.acs.org/doi/pdf/10.1021/ac00084a016

Molecular Luminescence Spectrometry

Molecular Fluorescence, Phosphorescence, and Chemiluminescence Spectrometry

Anal Chem. 2006 Jun 15; 78(12): 4047–4068.

https://www.ncbi.nlm.nih.gov/pmc/articles/PMC2662353/

Fluorescence and phosphorescence

Fluorescence and Phosphorescence

Practical Capture and Reproduction of Phosphorescent Appearance

O. Nalbach1, H.-P. Seidel1 and T. Ritschel2

1Max-Planck Institut für Informatik, Germany 2University College London, United Kingdom

Fluorescent Dyes and Pigments

Rami Ismael Hansrudolf Schwander Paul Hendrix

Dyes, optical brightening agents

Permanency of paper and board

Structural colour and iridescence in plants: the poorly studied relations of pigment colour

Beverley J. Glover1,* and  Heather M. Whitney2

https://www.ncbi.nlm.nih.gov/pmc/articles/PMC2850791/

Analysing photonic structures in plants 

Silvia Vignolini1,2, Edwige Moyroud3, Beverley J. Glover3 and Ullrich Steiner1

1Cavendish Laboratory, University of Cambridge, JJ Thomson Avenue, Cambridge CB3 0HE, UK 2Department of Physics and Astronomy, University College London, Gower Street, London WC1E 6BT, UK 3Department of Plant Sciences, University of Cambridge, Downing Street, Cambridge CB2 3EA, UK

The Mechanism of Color Change in the Neon Tetra Fish: a Light‐Induced Tunable Photonic Crystal Array

Dvir Gur 1 , Benjamin A Palmer 1 , Ben Leshem 2 , Dan Oron 2 , Peter Fratzl 3 , Steve Weiner 1 , Lia Addadi 4

First published: 27 April 2015

https://pubmed.ncbi.nlm.nih.gov/25914222/

Colour measurement in the paper industry

https://www.erx50.com/en/anwendungen/papier-obsolete

Print Quality Control Management for Papers Containing Optical Brightening Agents

Roberto Pasic, Ivo Kuzmanov, Svetlana Mijakovska

The issues of Optical Brightening Agents in paper and ink

http://the-print-guide.blogspot.com/2009/03/issues-of-optical-brightening-agents-in.html

Optical Brightening Agents in Manufacturing

Posted July 20, 2015 by Greg Stehn

https://www.xrite.com/blog/controlling-obas-in-manufacturing

SUCCESSFUL COLOR MANAGEMENT OF PAPERS WITH OPTICAL BRIGHTENERS

Effect of Optical Brightening Agents and UV Protective Coating on Print Stability of Fine Art Substrates for Ink Jet

Veronika Chovancova-Lovell* and Paul D. Fleming III**

*Daniel J Carlick Technical Center Sun Chemical Corporation

**Department of Paper Engineering, Chemical Engineering and Imaging, Center for Ink and Printability Western Michigan University

OPTICAL BRIGHTENING AGENTS

A Visual Examination of the Solubility of Brighteners in Paper after Aqueous Treatment

Emily H. Cohen

December 17, 2014

Color & Perception Roemich

To Brighten or Not to Brighten

Scientifically examining the controversy over OBA inkjet media additives.

SIGN & DIGITAL GRAPHICS • July 2009

Substitution of Optical Brightener Agents in Industrial Textiles

MUDP report October 2018

Denmark

Chemistry of optical brighteners and uses in textile industries

by Mr. Anwer Tiki, Afreen Amin and Azeema Kanwal, AVM Chemical Industries.

Archroma Introduces Leucophor® MT, A New Cost-Effective Optical Brightening Agent For High Whiteness Surface Applications

Reinach, Switzerland – 20/02/2018

https://www.archroma.com/press/releases/archroma-introduces-leucophor-mt-a-new-cost-effective-optical-brightening-agent-for-high-whiteness-surface-applications

Whiteness indices and UV standards

Konica Minolta

https://www5.konicaminolta.eu/ru/measuring-instruments/learning-centre/colour-measurement/colour/the-colour-of-white.html

The Effect of Optical Brightening Agent (OBA) in Paper and Illumination Intensity on Perceptibility of Printed Colors

Changlong Yu 2014

RIT MS Thesis

Demystifying Three Key Paper Properties

Whiteness, Brightness and Shade

Xerox

The Evolution of Tinting Dyes and Optical Brighteners in White Papers

Mark Crable

Greenville Colorants

Addressing the Challenges of Optical Brightening Agents in Paper Color Measurement

Posted on  December 4, 2015 by Ken Phillips

Hunter Lab

Adding optical brightening agents to high-yield pulp at the pulp mill

Review: Use of optical brightening agents (OBAs) in the production of paper containing high-yield pulps

Shi, H., Liu, H., Ni, Y., Yuan, Z., Zou, X., and Zhou, Y. (2012). 

BioRes. 7(2), 2582-2591.

FLUORESCENT WHITENING AGENTS IN LAUNDRY DETERGENT & PAPER

https://www.sas.upenn.edu/~kimg/mcephome/chem507/spec6.html

A summary of ultra-violet fluorescent materials relevant to Conservation


AICCM National Newsletter No 137 March 2017

Danielle Measday, Museums Victoria

Efficiency of Fluorescent Whitening Agents in Pigment Coatings

Zaeem Aman 2012

Master Thesis
Master of Science in Chemical Engineering

Karlstads universitet (KAU) 651 88 Karlstad

Colour Chemistry 2nd edition

Robert M Christie

School of Textiles & Design, Heriot-Watt University, UK and Department of Chemistry, King Abdulaziz University, Saudi Arabia

Email: r.m.christie@hw.ac.uk

Colour and the Optical Properties of Materials

An Exploration of the Relationship Between Light, the Optical Properties of Materials and Colour

PROFESSOR RICHARD J. D. TILLEY

Emeritus Professor, University of Cardiff, UK

2011 John Wiley & Sons, Ltd

FLUORESCENCE AND PHOSPHORESCENCE

Andrew Glassner

Rendering of fluorescent materials using spectral path tracing : Niixtracer, a custom rendering engine

Nolan MESTRES

2018

Spectral Mollification for Bidirectional Fluorescence

A. Jung1, J. Hanika1 and C. Dachsbacher1 1Karlsruhe Institute of Technology

Assessment of whiteness and tint of fluorescent substrates with good inter-instrument correlation

Rolf Griesser

1994 Williamsburg Conference on Colorimetry of Fluorescent Materials“; English first publication in Color Res. Appl. 19 (1994), 6, p. 446-460

CIE whiteness and tint : possible improvements

R. Griesser

„AIC Interim Meeting ’95 Colorimetry”, Berlin, 4. – 6. September 1995;

first publication (Engl.) Appita 49 (1996), 2, p. 105-112;

https://www.semanticscholar.org/paper/CIE-whiteness-and-tint-%3A-possible-improvements-Griesser/d2a1df7fb5b7b489fecd344c1f6b8025b3a84165?p2df

WHITENESS DETERMINATION OF OPTICALLY BRIGHTENED TEXTILES

R. Hirschler, D.F. Oliveira and A.F. Azevedo

WHITENESS ASSESSMENT OF PAPER SAMPLES AT THE VICINITY OF THE UPPER CIE WHITENESS LIMIT

Coppel L., Lindberg, S., and Rydefalk, S.

STFI-Packforsk, Stockholm, Sweden

Limitations in the efficiency of fluorescent whitening agents in uncoated paper

Ludovic G. Coppel, Mattias Andersson, Per Edström and Jussi Kinnunen

WHITENESS EVALUATIONS ON TINTED AND FWA ADDED PAPERS

Burak Aksoy, Paul D. Fleming* and Margaret K. Joyce

Department of Paper Engineering, Chemical Engineering and Imaging Center for Coating Development
Western Michigan University
Kalamazoo, MI 49008

Comparative Study of Brightness/Whiteness Using Various Analytical Methods on Coated Papers Containing Colorants

Burak Aksoy, Margaret K. Joyce and Paul D. Fleming
Department of Paper and Printing Science and Engineering, Western Michigan University, Kalamazoo, MI, 49008

https://www.researchgate.net/publication/250763960_Comparative_Study_of_BrightnessWhiteness_Using_Various_Analytical_Methods_on_Coated_Papers_Containing_Colorants

Using Optical Brightening Agents (OBA) for Improving the Optical Properties of HYP-Containing Paper Sheets

H. ZhangZ. HeY. Zhou

Published 2009 Materials Science

https://www.semanticscholar.org/paper/Using-Optical-Brightening-Agents-%28OBA%29-for-the-of-Zhang-He/665b2e9c5e7749d54f8904624370945c2e723dd1?p2df

Whiteness and Fluorescence in Layered Paper and Board

Perception and Optical Modelling

L G Coppel

PhD Thesis 2012 Sweden

Influence of SPD on Whiteness value of FWA treated samples

Michal VIK, Martina VIKOVÁ, Aravin Prince PERIYASAMY

https://dspace.vutbr.cz/bitstream/handle/11012/51679/257-vik.pdf?sequence=1

Fluorescence model for multi-layer papers using conventional spectrophotometers

L. G. Coppel, M. Andersson, M. Neuman and P. Edström

https://www.researchgate.net/publication/258551824_Fluorescence_model_for_multi-layer_papers_using_conventional_spectrophotometers

Factors affecting the whiteness of optically brightened material

Juan Lin 1Renzo ShameyDavid Hinks

J Opt Soc Am . 2012 Nov 1; 29 (11): 2289-99.

https://pubmed.ncbi.nlm.nih.gov/23201789/

FLUORESCENCE AND THE PAPER APPEARANCE – CHALLENGES IN PAPER COLORING

Dr. Tarja Shakespeare1, Dr. John Shakespeare

  • June 2009
  • Conference: Papermaking Research Symposium, PRS2009
  • At: Kuopio, Finland

https://www.researchgate.net/publication/328873894_FLUORESCENCE_AND_THE_PAPER_APPEARANCE-CHALLENGES_IN_PAPER_COLORING

A fluorescent extension to the Kubelka–Munk model

Tarja Shakespeare John Shakespeare

First published: 30 December 2002

Col Res Appl, 28, 4–14, 2003

https://onlinelibrary.wiley.com/doi/abs/10.1002/col.10109

Problems in colour measurement of fluorescent paper grades

Tarja Shakespeare John Shakespeare

Analytica Chimica Acta
Volume 380, Issues 2–3, 2 February 1999, Pages 227-242

https://www.sciencedirect.com/science/article/abs/pii/S0003267098004838

Colorant modelling for on-line paper coloring: Evaluations of models and an extension to Kubelka-Munk model 

Show affiliations

  • Shakespeare, Tarja Tuulikki
  • Thesis (PhD). TAMPEREEN TEKNILLINEN KORKEAKOULU (FINLAND), Source DAI-B 61/11, p. 6074, May 2001, 147 pages.

https://www.researchgate.net/publication/234289229_Colorant_modelling_for_on-line_paper_coloring_Evaluations_of_models_and_an_extension_to_Kubelka-Munk_model

Kubelka Munk Model in Paper Optics: Successes, Limitations and Improvements

L. Yang

Progress in Paper Physics Seminar 2011

Conference Proceedings

Editor U. Hirn

Radiative properties of optically thick fluorescent turbid media

Alexander A. Kokhanovsky

Journal of the Optical Society of America A

Vol. 26,Issue 8,pp. 1896-1900(2009)•

https://www.osapublishing.org/josaa/abstract.cfm?uri=josaa-26-8-1896

Fluorescent Transfer of Light in Dyed Materials

S. D. Howison and R. J. Lawrence


Read More: https://epubs.siam.org/doi/abs/10.1137/0153026

SIAM J. Appl. Math., 53(2), 447–458. (12 pages)

https://epubs.siam.org/doi/abs/10.1137/0153026

Extension of the Stokes equation for layered constructions to fluorescent turbid media

Ludovic G. Coppel,1,2 Magnus Neuman,2 and Per Edström

1Innventia AB, Box 5604, SE-11486 Stockholm, Sweden

2Department of Natural Sciences, Engineering and Mathematics, Mid Sweden University, SE-87188 Härnösand, Sweden

https://www.researchgate.net/publication/223985363_Extension_of_the_Stokes_equation_for_layered_constructions_to_fluorescent_turbid_media

Influence of Deinked Pulp on Paper Colour and its Susceptibility to Ageing

Ewa Drzewińska

Whiteness Assessment: A Primer

Concepts, Determination and Control of Perceived Whiteness

Dr. Claudio Puebla Axiphos GmbH Germany

The Chemistry and Physics of Special-Effect Pigments and Colorants for Inks and Coatings

Paints and Coatings Industry

2003

https://www.pcimag.com/articles/85016-the-chemistry-and-physics-of-special-effect-pigments-and-colorants-for-inks-and-coatings

Resource Flows: Material Flow Accounting (MFA), Life Cycle Analysis (LCA), Input Output Networks and other methods

Resource Flows: Material Flow Accounting (MFA), Life Cycle Analysis (LCA), Input Output Networks and other methods

 

 

 

From Materials Flow and Sustainability

mfa5mfa6

 

Key Terms:

  • MFA (Material Flow Analysis)
  • MFCA (Material Flow Cost Accounting)
  • LCA (Life Cycle Analysis)
  • SFA (Substance Flow Analysis)
  • MF WIO (Material Flow Waste Input Output)
  • IO LCA (Input Output Life Cycle Analysis)
  • KLEM (Capital, Labor, Energy, Materials)
  • PIOT ( Physical Input Output Tables)
  • MIOT (Monetary Input Output Tables)
  • IO MFN (Input Output Material Flow Network)
  • Social Ecology
  • Industrial Ecology
  • Urban Metabolism
  • Industrial Symbiosis
  • Industrial Metabolism
  • M-P Chains (Material Product Chains)
  • Global Value Chains
  • National Footprint Accounts
  • Inter Industry Analysis
  • Input Output Economics
  • End to End Supply Chains
  • Supply and Use Tables
  • Material Balance
  • Mass Balance
  • Biophysical Economics
  • Ecological Economics
  • Environmentally Extended Input Output Analysis (EE-IOA)
  • Stocks and Flows
  • MaTrace
  • Global MaTrace

 

Software for Data Analysis and Visualization:

 

This article lists several other software packages for MFA/SFA

https://www.azavea.com/blog/2017/08/09/six-sankey-diagram-tool/

 

 

Material Flow Analysis

From Practical Handbook of MATERIAL FLOW ANALYSIS

Material flow analysis (MFA) is a systematic assessment of the flows and stocks of materials within a system defined in space and time. It connects the sources, the pathways, and the intermediate and final sinks of a material. Because of the law of the conservation of matter, the results of an MFA can be controlled by a simple material balance comparing all inputs, stocks, and outputs of a process. It is this distinct characteristic of MFA that makes the method attractive as a decision-support tool in resource management, waste management, and environmental management.

An MFA delivers a complete and consistent set of information about all flows and stocks of a particular material within a system. Through balancing inputs and outputs, the flows of wastes and environmental loadings become visible, and their sources can be identified. The depletion or accumulation of material stocks is identified early enough either to take countermeasures or to promote further buildup and future utilization. Moreover, minor changes that are too small to be measured in short time scales but that could slowly lead to long-term damage also become evident.

Anthropogenic systems consist of more than material flows and stocks (Figure 1.1). Energy, space, information, and socioeconomic issues must also be included if the anthroposphere is to be managed in a responsible way. MFA can be performed without considering these aspects, but in most cases, these other factors are needed to interpret and make use of the MFA results. Thus, MFA is frequently coupled with the analysis of energy, economy, urban planning, and the like.

In the 20th century, MFA concepts have emerged in various fields of study at different times. Before the term MFA had been invented, and before its comprehensive methodology had been developed, many researchers used the law of conservation of matter to balance processes. In process and chemical engineering, it was common practice to analyze and balance inputs and outputs of chemical reactions. In the economics field, Leontief introduced input–output tables in the 1930s, thus laying the base for widespread application of input–output methods to solve economic problems. The first studies in the fields of resource conservation and environmental management appeared in the 1970s. The two original areas of application were (1) the metabolism of cities and (2) the analysis of pollutant pathways in regions such as watersheds or urban areas. In the following decades, MFA became a widespread tool in many fields, including process control, waste and wastewater treatment, agricultural nutrient management, water-quality management, resource conservation and recovery, product design, life cycle assessment (LCA), and others.

 

Substance Flow Analysis

From Feasibility assessment of using the substance flow analysis methodology for chemicals information at macro level

SFA is used for tracing the flow of a selected chemical (or group of substances) through a defined system. SFA is a specific type of MFA tool, dealing only with the analysis of flows of chemicals of special interest (Udo de Haes et al., 1997). SFA can be defined as a detailed level application of the basic MFA concept tracing the flow of selected chemical substances or compounds — e.g. heavy metals (mercury (Hg), lead (Pb), etc.), nitrogen (N), phosphorous (P), persistent organic substances, such as PCBs, etc. — through society.

An SFA identifies these entry points and quantifies how much of and where the selected substance is released. Policy measures may address these entry points, e.g. by end‐of‐pipe technologies. Its general aim is to identify the most effective intervention points for policies of pollution prevention. According to Femia and Moll (2005), SFA aims to answer the following questions:

• Where and how much of substance X flows through a given system?

• How much of substance X flows to wastes?
• Where do flows of substance X end up?
• How much of substance X is stored in durable goods?
• Where could substance X be more efficiently utilised in technical processes?
• What are the options for substituting the harmful substance?
• Where do substances end up once they are released into the natural environment?

When an SFA is to be carried out, it involves the identification and collection of data on the one hand, and modelling on the other. According to van der Voet et al. (OECD, 2000), there are three possible ways to ‘model’ the system:

Accounting (or bookkeeping) The input for such a system is the data that can be obtained from trade and production statistics. If necessary, further detailed data can be recovered on the contents of the specific substances in those recorded goods and materials. Emissions and environmental fluxes or concentration monitoring can be used for assessing the environmental flows. The accounting overview may also serve as an identification system for missing or inaccurate data.

Missing amounts can be estimated by applying the mass balance principle. In this way, inflows and outflows are balanced for every node, as well as for the system as a whole, unless accumulation within the system can be proven. This technique is most commonly used in material flow studies, and can be viewed as a form of descriptive statistics. There are, however, some examples of case studies that specifically address societal stocks, and use these as indicator for possible environmental problems in the future (OECD, 2000).

Static modelling is the process whereby the network of flow nodes is translated into a mathematical ‘language’, i.e. a set of linear equations, describing the flows and accumulations as inter‐dependent. Emission factors and distribution factors over the various outputs for the economic processes and partition coefficients for the environmental compartments can be used as variables in the equations. A limited amount of substance flow accounting data is also required for a solution of the linear equations. However, the modelling outcome is determined largely by the substance distribution patterns.

Static modelling can be extended by including a so‐called origin analysis in which the origins of one specific problematic flow can be traced on several levels. Three levels may be distinguished:

• direct causes derived directly from the nodes balance (e.g one of the direct causes of cadmium (Cd) load in soil is atmospheric deposition);

• economic sectors (or environmental policy target groups) directly responsible for the problem. This is identified by following the path back from node to node to the point of emission (e.g. waste incineration is one of the economic sectors responsible for the cadmium load in soil);

• ultimate origins found by following the path back to the system boundaries (e.g. the extraction, transport, processing and trade of zinc (Zn) ore is one of the ultimate origins of the cadmium load in soil).

Furthermore, the effectiveness of abatement measures can be assessed with static modelling by recording timelines on substances (OECD, 2000).

Dynamic modelling is different to the static SFA model, as it includes substance stocks accumulated in society as well as in various materials and products in households and across the built‐up environments.

For SFA, stocks play an important role in the prediction of future emissions and waste flows of products with a long life span. For example, in the case of societal stocks of PVC, policy makers need to be supplied with information about future PVC outflows. Today’s stocks become tomorrow’s emissions and waste flows. Studies have been carried out on the analysis of accumulated stocks of metals and other persistent toxics in the societal system. Such build‐ups can serve as an ‘early warning’ signal for future emissions and their potential effects, as one day these stocks may become obsolete and recognisably dangerous, e.g. as in the case of asbestos, CFCs, PCBs and mercury in chlor‐alkali cells. As the stocks are discarded, they end up as waste, emissions, factors of risks to environment and population. In some cases, this delay between inflow and outflow can be very long indeed.

Stocks of products no longer in use, but not yet discarded, are also important. These stocks could include: old radios, computers and/or other electronic equipment stored in basements or attics, out‐of‐use pipes still in the ground, obsolete stocks of chemicals no longer produced but still stored, such as lead paints and pesticides. These ‘hibernating stocks’ are likely to be very large, according to OECD estimates (2000). Estimating future emissions is a crucial issue if environmental policy makers are to anticipate problems and take timely, effective action. In order to do this, stocks cannot be ignored. Therefore, when using MFA or SFA models for forecasting, stocks should play a vital part. Flows and stocks interact with each other. Stocks grow when the inflows exceed the outflows of a (sub)‐system and certain outflows of a (sub)‐system are disproportional to the stocks.

For this dynamic model, additional information is needed for the time dimension of the variables, e.g. the life span of applications in the economy; the half life of compounds; the retention time in environmental compartments and so forth. Calculations can be made not only on the ‘intrinsic’ effectiveness of packages of measures, but also on their anticipated effects in a specific year in the future. They can also be made on the time
it takes for such measures to become effective. A dynamic model is therefore most suitable for scenario analysis, provided that the required data are available or can be estimated with adequate accuracy (OECD, 2000).

 

Life Cycle Analysis (LCA)

 

What is Life Cycle Assessment (LCA)?

As environmental awareness increases, industries and businesses are assessing how their activities affect the environment. Society has become concerned about the issues of natural resource depletion and environmental degradation. Many businesses have responded to this awareness by providing “greener” products and using “greener” processes. The environmental performance of products and processes has become a key issue, which is why some companies are investigating ways to minimize their effects on the environment. Many companies have found it advantageous to explore ways of moving beyond compliance using pollution prevention strategies and environmental management systems to improve their environmental performance. One such tool is LCA. This concept considers the entire life cycle of a product (Curran 1996).

Life cycle assessment is a “cradle-to-grave” approach for assessing industrial systems. “Cradle-to-grave” begins with the gathering of raw materials from the earth to create the product and ends at the point when all materials are returned to the earth. LCA evaluates all stages of a product’s life from the perspective that they are interdependent, meaning that one operation leads to the next. LCA enables the estimation of the cumulative environmental impacts resulting from all stages in the product life cycle, often including impacts not considered in more traditional analyses (e.g., raw material extraction, material transportation, ultimate product disposal, etc.). By including the impacts throughout the product life cycle, LCA provides a comprehensive view of the environmental aspects of the product or process and a more accurate picture of the true environmental trade-offs in product and process selection.

The term “life cycle” refers to the major activities in the course of the product’s life-span from its manufacture, use, and maintenance, to its final disposal, including the raw material acquisition required to manufacture the product. Exhibit 1-1 illustrates the possible life cycle stages that can be considered in an LCA and the typical inputs/outputs measured.

 

Methods of LCA

  • Process LCA
  • Economic Input Output LCA
  • Hybrid Approach

 

 

From Life cycle analysis (LCA) and sustainability assessment

 

mfa8

 

 

Material Input Output Network Analysis

  • PIOT (Physical Input Output Tables)
  • MIOT (Monetary Input Output Tables)
  • WIOT (Waste Input Output Tables
  • MRIO (Multi Regional Input Output)
  • SUT (Supply and Use Tables)

 

From Industrial ecology and input-output economics: An introduction

Although it was the pioneering contributions by Duchin (1990, 1992) that explicitly made the link between input–output economics and industrial ecology, developments in input– output economics had previously touched upon the core concept of industrial ecology.

Wassily Leontief himself incorporated key ideas of industrial ecology into an input– output framework. Leontief (1970) and Leontief and Ford (1972) proposed a model where the generation and the abatement of pollution are explicitly dealt with within an extended IO framework. This model, which combines both physical and monetary units in a single coefficient matrix, shows how pollutants generated by industries are treated by so-called ‘pollution abatement sectors.’ Although the model has been a subject of longstanding methodological discussions (Flick, 1974; Leontief, 1974; Lee, 1982), its structure captures the essence of industrial ecology concerns: abatement of environmental problems by exploiting inter-industry interactions. As a general framework, we believe that the model by Leontief (1970) and Leontief and Ford (1972) deserves credit as an archetype of the various models that have become widely referred to in the field of industrial ecology during the last decade, including mixed-unit IO, waste IO and hybrid Life Cycle Assessment (LCA) models (Duchin, 1990; Konijn et al., 1997; Joshi, 1999; Nakamura and Kondo, 2002; Kagawa et al., 2004; Suh, 2004b). Notably, Duchin (1990) deals with the conversion of wastes to useful products, which is precisely the aim of industrial ecology, and subsequently, as part of a study funded by the first AT&T industrial ecology fellowship program, with the recovery of plastic wastes in particular (Duchin and Lange, 1998). Duchin (1992) clarifies the quantity-price relationships in an input–output model (a theme to which she has repeatedly returned) and draws its implications for industrial ecology, which has traditionally been concerned exclusively with physical quantities.

Duchin and Lange (1994) evaluated the feasibility of the recommendations of the Brundtland Report for achieving sustainable development. For that, they developed an input–output model of the global economy with multiple regions and analyzed the consequences of the Brundtland assumptions about economic development and technological change for future material use and waste generation. Despite substantial improvements in material efficiency and pollution reduction, they found that these could not offset the impact of population growth and the improved standards of living endorsed by the authors of the Brundtland Report.

Another pioneering study that greatly influenced current industrial ecology research was described by Ayres and Kneese (1969) and Kneese et al. (1970), who applied the massbalance principle to the basic input–output structure, enabling a quantitative analysis of resource use and material flows of an economic system. The contribution by Ayres and Kneese is considered the first attempt to describe the metabolic structure of an economy in terms of mass flows (see Ayres, 1989; Haberl, 2001).

Since the 1990s, new work in the areas of economy-wide research about material flows, sometimes based on Physical Input–Output Tables (PIOTs), has propelled this line of research forward in at least four distinct directions: (1) systems conceptualization (Duchin, 1992; Duchin, 2005a); (2) development of methodology (Konijn et al., 1997; Nakamura and Kondo, 2002; Hoekstra, 2003; Suh, 2004c; Giljum et al., 2004; Giljum and Hubacek, 2004; Dietzenbacher, 2005; Dietzenbacher et al., 2005; Weisz and Duchin, 2005); (3) compilation of data (Kratterl and Kratena, 1990; Kratena et al., 1992; Pedersen, 1999; Ariyoshi and Moriguchi, 2003; Bringezu et al., 2003; Stahmer et al., 2003); and (4) applications (Duchin, 1990; Duchin and Lange, 1994, 1998; Hubacek and Giljum, 2003; Kagawa et al., 2004). PIOTs generally use a single unit of mass to describe physical flows among industrial sectors of a national economy. In principle, such PIOTs are capable of satisfying both column-wise and row-wise mass balances, providing a basis for locating materials within a national economy.3 A notable variation in this tradition, although it had long been used in input–output economic studies starting with the work of Leontief, is the mixed-unit IO table. Konijn et al. (1997) analyzed a number of metal flows in the Netherlands using a mixed-unit IO table, and Hoekstra (2003) further improved both the accounting framework and data. Unlike the original PIOTs, mixed-unit IOTs do not assure the existence of column-wise mass-balance, but they make it possible to address more complex questions. Lennox et al. (2004) present the Australian Stocks and Flows Framework (ASFF), where a dynamic IO model is implemented on the basis of a hybrid input–output table. These studies constitute an important pillar of industrial ecology that is generally referred to as Material Flow Analysis (MFA).4

Although the emphasis in industrial ecology has arguably been more on the materials side, energy issues are without doubt also among its major concerns. In this regard, energy input–output analysis must be considered another important pillar for the conceptual basis of ‘industrial energy metabolism.’ The oil shock in the 1970s stimulated extensive research on the structure of energy use, and various studies quantifying the energy associated with individual products were carried out (Berry and Fels, 1973; Chapman, 1974). Wright (1974) utilized Input–Output Analysis (IOA) for energy analysis, which previously had been dominated by process-based analysis (see also Hannon, 1974; Bullard and Herendeen, 1975; Bullard et al., 1978). The two schools of energy analysis, namely process analysis and IO energy analysis, were merged by Bullard and Pillarti (1976) into hybrid energy analysis (see also van Engelenburg et al., 1994; Wilting,1996). Another notable contribution to the area of energy analysis was made by Cleveland et al. (1984), who present a comprehensive analysis, using the US input–output tables, quantifying the interconnection of energy and economic activities from a biophysical standpoint (see Cleveland, 1999; Haberl, 2001; Kagawa and Inamura, 2004). These studies shed light on how an economy is structured by means of energy flows and informs certain approaches to studying climate change (see for example Proops et al., 1993; Wier et al., 2001).

What generally escapes attention in both input–output economics and industrial ecology, despite its relevance for both, is the field of Ecological Network Analysis (ENA). Since Lotka (1925) and Lindeman (1942), material flows and energy flows have been among the central issues in ecology. It was Hannon (1973) who first introduced concepts from input–output economics to analyze the structure of energy utilization in an ecosystem. Using an input–output framework, the complex interactions between trophic levels or ecosystem compartments can be modeled, taking all direct and indirect relationships between components into account. Hannon’s approach was adopted, modified and re-introduced by various ecologists. Finn (1976, 1977), among others, developed a set of analytical measures to characterize the structure of an ecosystem using a rather extensive reformulation of the approach proposed by Hannon (1973). Another important development in the tradition of ENA is so-called environ analysis. Patten (1982) proposed the term ‘environ’ to refer to the relative interdependency between ecosystem components in terms of nutrient or energy flows. Results of environ analysis are generally presented as a comprehensive network flow diagram, which shows the relative magnitudes of material or energy flows between the ecosystem components through direct and indirect relationships (Levine, 1980; Patten, 1982). Ulanowicz and colleagues have broadened the scope of materials and energy flow analysis both conceptually and empirically (Szyrmer and Ulanowicz, 1987). Recently Bailey et al. (2004a, b) made use of the ENA tradition to analyze the flows of several metals through the US economy. Suh (2005) discusses the relationship between ENA and IOA and shows that Patten’s environ analysis is similar to Structural Path Analysis (SPA), and that the ENA framework tends to converge toward the Ghoshian framework rather than the Leontief framework although using a different formalism (Defourny and Thorbecke, 1984; Ghosh, 1958).

 

 

From Materials and energy flows in industry and ecosystem netwoks : life cycle assessment, input-output analysis, material flow analysis, ecological network flow analysis, and their combinations for industrial ecology

 

MFA

 

From Regional distribution and losses of end-of-life steel throughout
multiple product life cycles—Insights from the global multiregional
MaTrace model

mfa4

From Feasibility assessment of using the substance flow analysis methodology for chemicals information at macro level

 

mfa2MFA3

 

Sankey Diagram

From Hybrid Sankey diagrams: Visual analysis of multidimensional data for understanding resource use

Sankey diagrams are used to visualise flows of energy, materials or other resources in a variety of applications. Schmidt (2008a) reviewed the history and uses of these diagrams. Originally, they were used to show flows of energy, first in steam engines, more recently for modern systems such as power plants (e.g. Giuffrida et al., 2011) and also to give a big-picture view of global energy use (Cullen and Allwood, 2010). As well as energy, Sankey diagrams are widely used to show flows of resources (Schmidt, 2008a). Recent examples in this journal include global flows of tungsten (Leal-Ayala et al., 2015), biomass in Austria (Kalt, 2015), and the life-cycle of car components (Diener and Tillman, 2016). More widely, they have been used to show global production and use of steel and aluminium (Cullen et al., 2012; Cullen and Allwood, 2013), and flows of natural resources such as water (Curmi et al., 2013). In all of these cases, the essential features are: (1) the diagram represents physical flows, related to a given functional unit or period of time; and (2) the magnitude of flows is shown by the link1 widths, which are proportional to an extensive property of the flow such as mass or energy (Schmidt, 2008b). Creating these diagrams is supported by software tools such as e!Sankey (ifu Hamburg, 2017), and several Life Cycle Assessment (LCA) and Material Flow Analysis (MFA) packages include features to create Sankey diagrams.

 

From Hybrid Sankey diagrams: Visual analysis of multidimensional data for understanding resource use

 

mfa7

 

Please see my related posts:

Wassily Leontief and Input Output Analysis in Economics

Shell Oil’s Scenarios: Strategic Foresight and Scenario Planning for the Future

Water | Food | Energy | Nexus: Mega Trends and Scenarios for the Future

Stock Flow Consistent Input Output Models (SFCIO)

Measuring Globalization: Global Multi Region Input Output Data Bases (G-MRIO)

Production and Distribution Planning : Strategic, Global, and Integrated

Intra Industry Trade and International Production and Distribution Networks

Trends in Intra Firm Trade of USA

Development of Global Trade and Production Accounts: UN SEIGA Initiative

Accounting For Global Carbon Emission Chains

Stock Flow Consistent Models for Ecological Economics

Jay W. Forrester and System Dynamics

Classical roots of Interdependence in Economics

Stock-Flow Consistent Modeling

 

 

 

 

Key Sources of Research:

SPECIAL SESSION ON MATERIAL FLOW ACCOUNTING

OECD

Paris, 24 October 2000

https://www.oecd.org/env/indicators-modelling-outlooks/4425421.pdf

An Innovative Accounting Framework for the Food-Energy-Water Nexus
Application of the MuSIASEM approach to three case studies

http://www.fao.org/docrep/019/i3468e/i3468e.pdf

Creating your own online data visualizations: SankeyMatic, OMAT, CartoDB

https://metabolismofcities.org/blog/4-creating-your-own-online-data-visualizations

Hybrid Sankey diagrams: Visual analysis of multidimensional data for understanding resource use

https://www.sciencedirect.com/science/article/pii/S0921344917301167

e!Sankey

Visualization of energy, cash and material flows with a Sankey diagram

https://www.ifu.com/en/e-sankey/sankey-diagrams/

UPIOM: A New Tool of MFA and Its Application to the Flow of Iron and Steel Associated with Car Production

https://pubs.acs.org/doi/pdf/10.1021/es1024299

Material flow analysis

WIKIPEDIA

https://en.wikipedia.org/wiki/Material_flow_analysis

Economy-wide Material Flow Accounting. Introduction and Guide.

Version 1.0

Article · January 2015

Fridolin Krausmann, Helga Weisz, Nina Eisenmenger, Helmut Schütz, Willi Haas
and Anke Schaffartzik

https://www.researchgate.net/publication/272885234_Economy-wide_Material_Flow_Accounting_Introduction_and_Guide_Version_10

Society’s Metabolism The Intellectual History of Materials Flow Analysis,

Part II, 1970-1998

Marina Fischer-Kowalski and Walter Huttler

Institute for Intenliscipiimny
Studies of Austrian Universities
University of Vienna
Vienna, Austria

http://www.esf.edu/cue/documents/Fischer-Kowalski_Huttler_1998.pdf

“Society’s Metabolism. The Intellectual History of Material Flow Analysis,

Part I, 1860 – 1970″.

Fischer-Kowalski, M.

1998.

Journal of Industrial Ecology 2(1): 61-78

https://www.researchgate.net/publication/249481665_Society%27s_Metabolism_The_Intellectual_History_of_Materials_Flow_Analysis_Part_I_1860-_1970

Analysis on energy–water nexus by Sankey diagram: the case of Beijing

https://www.tandfonline.com/doi/abs/10.1080/19443994.2013.768038

Unified Materials Information System (UMIS): An Integrated Material Stocks and Flows Data Structure

First published: 07 February 2018

 

https://onlinelibrary.wiley.com/doi/abs/10.1111/jiec.12730

Material Flow Cost Accounting with Umberto®

Schmidt, A. Hache, B.; Herold, F.; Götze, U.

http://qucosa.de/fileadmin/data/qucosa/documents/10523/2-05_Material_Flow_Cost_Accounting.pdf

https://www.wef.uni-osnabrueck.de/wp-content/uploads/PRESENTATIONS/Plenary/WEF_Richards.pdf

Study on Data for a Raw Material System Analysis: Roadmap and Test of the Fully Operational MSA for Raw Materials

Final Report

BIO by Deloitte

(2015)

Prepared for the European Commission, DG GROW.

https://www.certifico.com/component/attachments/download/2886

Integrated Analysis of Energy, Material and Time Flows in Manufacturing Systems

 

https://ac.els-cdn.com/S2212827116305479/1-s2.0-S2212827116305479-main.pdf?_tid=90701061-86fc-4c11-b078-cb577d8f8bdf&acdnat=1525719999_9dcee960cd6033d950a583cea379539f

e! Sankey

Visualization of energy, cash and material flows with a Sankey diagram

The most popular software for creating Sankey diagrams. Visualize the cash, material & energy flow or value streams in your company or along the supply chain. Share these appealing diagrams in reports or presentations.

 

https://www.ifu.com/en/e-sankey/?gclid=CjwKCAjw8r_XBRBkEiwAjWGLlIcWq2pRigMmJLKAXP4-ndFXR9ik41MUp9ahFZL2M9Ht5CKtwKIvTRoCdbsQAvD_BwE

MATERIAL FLOW ANALYSIS WITH SOFTWARE STAN

Oliver Cencic* and Helmut Rechberger
Institute for Water Quality Resources and Waste Management
Vienna University of Technology
Vienna A-1040, Austria

https://www.sswm.info/sites/default/files/reference_attachments/CENCIC%20and%20RECHBERGER%202008%20Material%20Flow%20Analysis%20with%20Software%20STAN.pdf

Recovery of Key Metals in the Electronics Industry in the
People’s Republic of China: An Opportunity in Circularity
(Initial Findings)

January 2018

Created as Part of the Platform for Accelerating the Circular Economy

http://www3.weforum.org/docs/Environment_Team/39777_Recovery_Key_Metals_Electronics_Industry_China_Opportunity_Circularity_report_2018.pdf

Sankey diagram

WIKIPEDIA

https://en.wikipedia.org/wiki/Sankey_diagram

MATERIAL FLOWS IN THE UNITED STATES
A PHYSICAL ACCOUNTING OF THE U.S. INDUSTRIAL ECONOMY

DONALD ROGICH
AMY CASSARA
IDDO WERNICK
MARTA MIRANDA

WRI

http://pdf.wri.org/material_flows_in_the_united_states.pdf

Industrial ecology and input-output economics: An introduction

Sangwon Suh

2005

https://www.researchgate.net/profile/Sangwon_Suh3/publication/24078824_Industrial_ecology_and_input-output_economics_An_introduction/links/0c960531f1d92f3705000000/Industrial-ecology-and-input-output-economics-An-introduction.pdf

A Handbook of Industrial Ecology

Robert Ayres

Leslie Ayres

http://pustaka.unp.ac.id/file/abstrak_kki/EBOOKS/A%20Handbook%20of%20Industrial%20Ecology.pdf#page=100

Physical and Monetary Input-Output Analysis:
What Makes the Difference?

Helga Weisz
Klagenfurt University
Faye Duchin
Rensselaer Polytechnic Institute

https://pdfs.semanticscholar.org/d946/ab5b067aacafe555acbc1e077b5b42e1fc92.pdf

Theory of materials and energy flow analysis in ecology and economics

Sangwon Suh

2005

https://www.researchgate.net/profile/Sangwon_Suh3/publication/227009838_Materials_and_energy_flows_in_industry_and_ecosystem_networks/links/00b7d53595cb006cbb000000/Materials-and-energy-flows-in-industry-and-ecosystem-networks.pdf

Conceptual Foundations and Applications of Physical Input-Output Tables

Stefan Giljum

Hubacek Klaus

2009

https://www.researchgate.net/profile/Hubacek_Klaus/publication/226286172_Conceptual_Foundations_and_Applications_of_Physical_Input-Output_Tables/links/0912f506c16a7d06af000000/Conceptual-Foundations-and-Applications-of-Physical-Input-Output-Tables.pdf

Alternative Approaches of Physical Input-Output Analysis to Estimate
Primary Material Inputs of Production and Consumption Activities

Stefan Giljum

Hubacek Klaus

2004

https://www.researchgate.net/profile/Hubacek_Klaus/publication/24078801_Alternative_Approaches_of_Physical_Input-Output_Analysis_to_Estimate_Primary_Material_Inputs_of_Production_and_Consumption_Activities/links/00b7d51cc1257aba71000000.pdf

Industrial Ecology: A Critical Review

https://nature.berkeley.edu/orourke/PDF/IE.pdf

EXIOPOL – development and illustrative analyses of a detailed global
multiregional environmentally-extended supply and use table/input output
table

Article in Economic Systems Research · May 2013

https://www.researchgate.net/profile/Jan_Oosterhaven/publication/281305069_EXIOPOL_-_development_and_illustrative_analyses_of_a_detailed_global_multiregional_environmentally-extended_supply_and_use_tableinput-output_table/links/561d652a08aecade1acb3bfc.pdf

Developing the Sectoral Environmental Database for Input- Output Analysis: Comprehensive Environmental Data Archive of the U.S.

Article in Economic Systems Research · December 2005

https://www.researchgate.net/profile/Sangwon_Suh3/publication/24078829_Developing_the_Sectoral_Environmental_Database_for_Input-Output_Analysis_Comprehensive_Environmental_Data_Archive_of_the_US/links/0c960531f1d910cda1000000.pdf

The material basis of the global economy

Worldwide patterns of natural resource extraction and their
implications for sustainable resource use policies

Arno Behrens,⁎, Stefan Giljum, Jan Kovanda, Samuel Niza

https://eden.dei.uc.pt/~camara/files/iTEAM/Material_Basis.pdf

The Sankey Diagram in Energy and Material Flow Management

Part I: History

https://onlinelibrary.wiley.com/doi/full/10.1111/j.1530-9290.2008.00004.x

The Sankey Diagram in Energy and Material Flow Management

Part II: Methodology and Current Applications

First published: 28 April 2008

https://onlinelibrary.wiley.com/doi/pdf/10.1111/j.1530-9290.2008.00015.x

Material and Energy Flow Analysis

First published: 23 March 2010

https://onlinelibrary.wiley.com/doi/pdf/10.1002/ceat.201090015

8. Biophysical economics: from physiocracy to ecological economics and industrial
ecology

Cutler J Cleveland

Article · January 1999

https://www.researchgate.net/profile/Cutler_Cleveland/publication/229055775_8_Biophysical_economics_from_physiocracy_to_ecological_economics_and_industrial_ecology/links/0deec51b7274ca0035000000.pdf

The Use of Input-Output Analysis in REAP to allocate Ecological Footprints and Material Flows to Final Consumption Categories

http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.457.7453&rep=rep1&type=pdf

Waste Input–Output Material Flow Analysis of Metals in the Japanese Economy

Shinichiro Nakamura1 and Kenichi Nakajima2

https://www.jim.or.jp/journal/e/pdf3/46/12/2550.pdf

A multi-regional environmental input-output model to quantify embodied material flows

Stefan Giljum a, Christian Lutz b,Ariane Jungnitz

https://www.iioa.org/conferences/16th/files/Papers/Giljum%20et%20al_IIOA.pdf

http://inforumweb.umd.edu/papers/conferences/2007/jungnitzgiljumlutz.pdf

Material Flow Accounting and Analysis (MFA)

A Valuable Tool for Analyses of Society-Nature Interrelationships

Entry prepared for the Internet Encyclopedia of Ecological Economics

Friedrich Hinterberger *, Stefan Giljum, Mark Hammer

Sustainable Europe Research Institute (SERI)

http://isecoeco.org/pdf/material.pdf

Human Ecology: Industrial Ecology

Faye Duchin
Rensselaer Polytechnic Institute

Stephen H. Levine
Tufts University

http://www.economics.rpi.edu/workingpapers/rpi0603.pdf

Development of the Physical Input Monetary Output Model for Understanding Material Flows within Ecological -Economic Systems

XU Ming

2010

http://www.jorae.cn/fileup/PDF/2010010204.pdf

Accounting for raw material equivalents of traded goods

A comparison of input-output approaches in physical, monetary, and mixed units

https://www.aau.at/wp-content/uploads/2016/11/working-paper-87-web.pdf

Material Flow Accounts and Policy. Data for Sweden 2004

by: Annica Carlsson, Anders Wadeskog, Viveka Palm, Fredrik Kanlén Environmental Accounts, Statistics Sweden,

2006.

http://www.scb.se/statistik/_publikationer/mi1301_2004a01_br_mift0701.pdf

Economy-wide Material Flow Accounts with Hidden Flows for Finland: 1945–2008

Jukka Hoffrén (ed.)

http://www.stat.fi/tup/julkaisut/tiedostot/isbn_978-952-244-233-8.pdf

EXIOBASE
Analysing environmental impacts of the global, interlinked economy

Konstantin Stadler, Richard Wood

Industrial Ecology Programme, NTNU, Norway

2014

http://www.syke.fi/download/noname/%7B3C267869-D6AE-447F-A98D-547C1D2B5819%7D/105511

ESSAYS ON INTERNATIONAL TRADE AND ENVIRONMENT
An Input-Output Analysis

http://repositorio.conicyt.cl/bitstream/handle/10533/179687/MUNOZ_PABLO_2868D.pdf?sequence=1

Using Material Flow Analysis for Sustainable Materials Management: Part of the Equation for Priority Setting

Frederick W. Allen

Priscilla A. Halloran

Angela H. Leith

M. Clare Lindsay

https://digitalcommons.unl.edu/cgi/viewcontent.cgi?referer=&httpsredir=1&article=1113&context=usepapapers

“Supply-Extension versus Use-Extension in Environmentally Extended Input-Output Modelling: Analyzing Physical Flows within the Austrian Economy”

Hanspeter Wieland*1, Nina Eisenmenger2, Dominik Wiedenhofer2, Martin Bruckner1

http://www.gws-os.com/downloads/ioworkshop/IO-Workshop-2017_Wieland_abstract.pdf

A Material Flow Analysis of Phosphorus in Japan
The Iron and Steel Industry as a Major Phosphorus Source

Kazuyo Matsubae-Yokoyama, Hironari Kubo, Kenichi Nakajima,
and Tetsuya Nagasaka

http://greenpi.info/files/articles/gpa_101_wa.pdf

Material Flows and Economic Development
Material Flow Analysis of the Hungarian Economy

http://pure.iiasa.ac.at/id/eprint/6729/1/IR-02-057.pdf

The material footprint of nations

Thomas O. Wiedmanna,b,c,1, Heinz Schandlb,d, Manfred Lenzenc, Daniel Moranc,e, Sangwon Suhf, James Westb, and Keiichiro Kanemotoc

http://www.pnas.org/content/pnas/112/20/6271.full.pdf

Calculation of direct and indirect material inputs by type of raw material and economic activities

Paper presented at the London Group Meeting
19 – 21 June 2006

Karl Schoer

Wiesbaden, July 2006

http://mdgs.un.org/unsd/envaccounting/ceea/archive/MFA/Raw_material_Germany.pdf

Waste Input-Output  (WIO) Table

Shinichiro NAKAMURA and Yasushi KONDO,

Waste Input-Output Analysis: Concepts and Application to Industrial Ecology.

In Series: Eco-Efficiency in Industry and Science,

Vol. 26, Springer, February 2009.

http://www.f.waseda.jp/nakashin/WIO.html

Economy Wide Material Flow Accounting (EW-MFA)

http://data.geus.dk/MICASheetsEditor/document/21e5c517-53b9-4b00-b7a3-55939829824b

Material flow analyses in technosphere and biosphere
– metals, natural resources and chemical products

Viveka Palm

http://www.diva-portal.org/smash/get/diva2:9105/FULLTEXT01.pdf

The UK waste input-output table: Linking waste generation to the UK economy.

Salemdeeb, R., Al-Tabbaa, A. and Reynolds, C.

Waste Management & Research, 34 (10). pp. 1089-1094.

http://eprints.whiterose.ac.uk/105894/13/Re_Main_Document.pdf

Multiregion input / output tables and material footprint accounts session

Discussion of aspects of of MRIO / material footprinting work, and considerations for developing and resource based economies.

James West | Senior experimental scientist
25 May 2016

http://www.switch-asia.eu/fileadmin/user_upload/RPSC/event/23-25May16-Mongolia/24-25May/10_MFand_MRIO_CSIRO_English.pdf

Construction of hybrid Input-Output tables for E3 CGE model calibration and consequences on energy policy analysis

COMBET Emmanuel – CIRED
GHERSI Frédéric – CIRED
LEFEVRE Julien – CIRED
LE TREUT Gaëlle – CIRED

https://www.gtap.agecon.purdue.edu/resources/download/6988.pdf

Prospects and Drivers of Future European Resource Requirements
Evidence from a Multi-National Macroeconomic Simulation Study*

Paper prepared for the final WIOD Conference
Groningen, April 2012
by
Martin Distelkamp, Mark Meyer** and Bernd Meyer

GWS mbH Osnabrueck

http://www.wiod.org/conferences/groningen/Paper_Distelkamp_et_al.pdf

Material Flow Analysis to Evaluate Sustainability in Supply Chains

Haroune Zaghdaoui, Anicia Jaegler, Natacha Gondran, Jairo Montoya-Torres

https://hal-emse.ccsd.cnrs.fr/emse-01633801/file/4189.pdf

Physical and monetary input–output analysis: What makes the difference?

Helga Weisz , Faye Duchin

https://www.peakoil.net/files/Physical%20and%20monetary%20input-output.pdf

Recycling and Remanufacturing in Input-Output Models

Randall W Jackson, West Virginia University
Taelim Choi, Georgia Institute of Technology
Nancey Green Leigh, Georgia Institute of Technology

http://rri.wvu.edu/wp-content/uploads/2012/11/WP2008-4.pdf

The Water Footprint Assessment Manual

http://waterfootprint.org/media/downloads/TheWaterFootprintAssessmentManual_2.pdf

The New Plastics Economy
Rethinking the future of plastics

http://www3.weforum.org/docs/WEF_The_New_Plastics_Economy.pdf

A Comparison of Environmental Extended Input-Output (EEIO) and Process Data in Life Cycle Assessment

https://www.climateearth.com/wp-content/uploads/2017/06/Comparing-Input-Output-and-Process-LCA-Data.CE-form2-LM-edits.pdf

Managing Logistics Flows Through Enterprise Input-Output Models

V. Albino1, A. Messeni Petruzzelli1 and O. G. Okogbaa2

http://cdn.intechopen.com/pdfs/6161/InTech-Managing_logistics_flows_through_enterprise_input_output_models.pdf

Social Metabolism and Accounting Approaches

Module:ECOLECON

Ecological economics

https://proxy.eplanete.net/galleries/broceliande7/social-metabolism-and-accounting-approaches

Input-Output Analysis in Laptop Computer Manufacturing

https://waset.org/publications/9998422/input-output-analysis-in-laptop-computer-manufacturing

IRON, STEEL AND ALUMINIUM IN THE UK: MATERIAL FLOWS AND THEIR
ECONOMIC DIMENSIONS

Final Project Report, March 2004

https://www.surrey.ac.uk/ces/files/pdf/0304_WP_Biffaward_Steel_Al-Final.pdf

A Framework for Sustainable Materials Management

Joseph Fiksel

http://www.eco-nomics.com/images/Framework_for_SMM.pdf

Energy and water conservation synergy in China: 2007–2012

Yi Jina, Xu Tanga,⁎, Cuiyang Fenga, Mikael Höökb

https://www.researchgate.net/profile/Yi_Jin51/publication/320073178_Energy_and_water_conservation_synergy_in_China_2007-2012/links/59cc5c13a6fdcc451d5cf2b5/Energy-and-water-conservation-synergy-in-China-2007-2012.pdf

Contributions of Material and Energy Flow Accounting to Urban Ecosystems Analysis: Case Study Singapore

Niels B. Schulz

http://archive.unu.edu/hq/library/Collection/PDF_files/IAS/IAS-WP136.pdf

A review of recent multi-region input–output models used for consumption-based
emission and resource accounting

Thomas Wiedmann

http://wedocs.unep.org/bitstream/handle/20.500.11822/19433/a_review.pdf?sequence=1&isAllowed=y

Physical Input Output (PIOT) Tables:  Developments and Future

http://iioa.org/conferences/18th/papers/files/35_20100427111_Hoekstra-PIOT.pdf

Materials and energy flows in industry and ecosystem netwoks : life cycle assessment, input-output analysis, material flow analysis, ecological network flow analysis, and their combinations for industrial ecology

Suh, S,

2004

https://openaccess.leidenuniv.nl/handle/1887/8399

Applying Ecological Input‐Output Flow Analysis to Material Flows in Industrial Systems: Part I: Tracing Flows

First published: 08 February 2008

Applying Ecological Input‐Output Flow Analysis to Material Flows in Industrial Systems: Part II: Flow Metrics

First published: 08 February 2008

Local systems, global impacts
Using life cycle assessment to analyse the
potential and constraints of industrial symbioses

rising to global challenges

25 Years of Industrial Ecology

 https://is4ie.org/resources/documents/4/download

Literature study on Industrial Ecology

Gerard Fernandez Gonzalez

 

https://upcommons.upc.edu/bitstream/handle/2117/77035/Final%20version%20-%20Document.pdf?sequence=1&isAllowed=y

 

 

 

 

 

Practical Handbook of MATERIAL FLOW ANALYSIS

Paul H. Brunner and Helmut Rechberger

Handbook of Input-Output Economics in Industrial Ecology


 
edited by Sangwon Suh

Taking Stock of Industrial Ecology

edited by Roland Clift, Angela Druckman

Ecological Input-Output Analysis-Based Sustainability Analysis of Industrial Systems

 

Cristina Piluso and Yinlun Huang*

 

Helen H. Lou

An Extended Model for Tracking Accumulation Pathways of Materials Using Input–Output Tables: Application to Copper Flows in Japan

Ryosuke Yokoi * ID , Jun Nakatani ID and Yuichi Moriguchi
2008

TRACING MATERIAL FLOWS ON INDUSTRIAL SITES

Kálmán KÓSI and András TORMA
2005

 

 

 

Metabolism of Cities

 

https://metabolismofcities.org

 

 

 

 

 

Feasibility assessment of using the substance flow analysis methodology for chemicals information at macro level

 

https://www.eea.europa.eu/publications/technical_report_2007_1/file

 

 

 

Structural Investigation of Aluminum in the US Economy using Network Analysis

Philip Nuss, Wei-Qiang Chen Hajime Ohno, and T.E. Graedel

 

http://philip.nuss.me/wp-content/uploads/2016_SA_Network-Analysis-Aluminum_EST.pdf

 

 

 

 

Economy-wide Material Flow Analysis and Indicators

http://www.umweltgesamtrechnung.at/ms/ugr/ugr_en/ugr_physicalaccounts/ugr_materialflowaccounts/

 

 

 

 

Regional distribution and losses of end-of-life steel throughout
multiple product life cycles—Insights from the global multiregional
MaTrace model

 

Stefan Pauliuka,∗, Yasushi Kondob, Shinichiro Nakamurab, Kenichi Nakajimac

 

https://ac.els-cdn.com/S0921344916302774/1-s2.0-S0921344916302774-main.pdf?_tid=838ffb90-95a9-4f3a-a617-f619f32d4558&acdnat=1531385937_3f722f2c2f71337c47a1024b0c841d16

 

 

 

 

MaTrace: Tracing the Fate of Materials over Time and Across Products in Open-Loop Recycling

Shinichiro Nakamura,*,† Yasushi Kondo,† Shigemi Kagawa,‡ Kazuyo Matsubae,§ Kenichi Nakajima,⊥ and Tetsuya Nagasaka§

https://pubs.acs.org/doi/pdf/10.1021/es500820h

 

 

 

 

 

Tracing China’s energy flow and carbon dioxide flow based on Sankey diagrams

 

Feiyin Wang1,2 • Pengtao Wang1,2 • Xiaomeng Xu1,2 • Lihui Dong1,2 • Honglai Xue1,2 • Shuai Fu1,2 • Yingxu Ji

 

https://www.researchgate.net/profile/Xiaomeng_Xu7/publication/318642022_Tracing_China%27s_energy_flow_and_carbon_dioxide_flow_based_on_Sankey_diagrams/links/5a59cd7f458515450270f982/Tracing-Chinas-energy-flow-and-carbon-dioxide-flow-based-on-Sankey-diagrams.pdf

 

 

 

 

Materials Flow and Sustainability

USGS

 

 

 

Life-cycle assessment

https://en.wikipedia.org/wiki/Life-cycle_assessment

 

 

 

 

LIFE CYCLE ASSESSMENT: PRINCIPLES AND PRACTICE

Scientific Applications International Corporation (SAIC) 11251 Roger Bacon Drive
Reston, VA 20190

 

http://www.epa.gov/nrmrl/lcaccess/pdfs/chapter1_frontmatter_lca101.pdf

 

 

 

 

Life cycle analysis (LCA) and sustainability assessment

 

http://www4.ncsu.edu/~richardv/documents/IntroductiontoLCAAU32013.pdf

Gantt Chart Simulation for Stock Flow Consistent Production Schedules

Gantt Chart Simulation for Stock Flow Consistent Production Schedules

 

I have knowledge of two software which do Gantt chart simulation for production scheduling.  These are used by top most companies in the world for production planning and scheduling now a days known as Supply Chain Management (SCM).

Production Schedules are stock flow consistent which means that starting inventories, and unused production of products result in cumulative inventory which is plotted for each of the product.

Production and Shipments (arrivals and dispatched) create Flows and Inventory levels indicate Stock level positions.

Gantt Chart simulators are excellent tools for operations management in plants.

The first Gantt chart was actually developed by Karol Adamiecki in Poland.  He called it a Harmonogram.  Henry Gantt in 1910 published first gantt chart which was later than publication by Karol Adamiecki.

These two charts below show Simulator window in which Gantt chart and inventory level plots are displayed.

Gantt Chart Simulator in Aspen Tech Plant Scheduler for Production Scheduling

active-guidance_10740930

 

Gantt Chart Simulator in Atlantic Decision Sciences Scheduler

Scheduling Board Single Chart

Key Sources for Research:

 

A Presentation by Chris Jones on Evolution of Graphical Production Scheduling Software

at the Cornell University Deptt of ORIE

https://www.youtube.com/watch?v=5T6QVZOl7EY

 

 

 

Atlantic Decision Sciences

http://atlanticdecisionsciences.com

 

 

Aspen Technology

http://aspentech.com/products/aspen-plant-scheduler/

 

 

History of Gantt Chart

http://www.ganttchart.com/orgforwork.html

 

 

History of Production Scheduling

http://www.springer.com/cda/content/document/cda_downloaddocument/9780387331157-c1.pdf?SGWID=0-0-45-321351-p148129370

 

 

The harmonogram: an overlooked method of scheduling work.

Marsh, E. R. (1976).

Project Management Quarterly, 7(1), 21–25.

https://www.pmi.org/learning/library/harmonogram-overlooked-method-scheduling-work-5666

 

The Harmonogram of Karol Adamiecki

Edward R. Marsh

http://amj.aom.org/content/18/2/358

 

Karol Adamiecki

https://www.pocketbook.co.uk/blog/tag/karol-adamiecki/

Some of my earlier published papers

Some of my earlier published papers

Below is a list of my papers which have been published in referred journals or as technical paper.  All of the work was done by me during my post graduate studies at Western Michigan University, Kalamazoo, Michigan, USA.  I was there since 1987 to 1991.

My research projects included:

  • Paper Recycling
  • Paper Color modeling and prediction
  • Simulation Modeling and Analysis of a Just In Time production system

Based on my research, I was awarded All University Graduate Creative and Research Scholar award by the University and was given a Award Citation by the University President in a Award Ceremony.

 

Effect of Recycling on the Physical Properties of Specific Fibers and Their Networks,”

by John F. Bobalek and Mayank Chaturvedi. In Proceedings, 1988 TAPPI Pulping Conference, p. 183-187.

 

 

Bobalek, John F., and Mayank Chaturvedi. 1989.

“The Effects of Recycling on the Physical Properties of Handsheets with Respect to Specific Wood Species.”

Tappi Journal June: 123- 125.

 

http://imisrise.tappi.org/TAPPI/Products/89/JUN/89JUN123.aspx

 

 

PREDICTION OF PAPER COLOR: A PROCESS SIMULATION APPROACH

WMU Masters Thesis 890

http://scholarworks.wmich.edu/masters_theses/890/

 

 

PREDICTION OF PAPER COLOR: A PROCESS SIMULATION APPROACH

IPST Technical Paper 469

https://smartech.gatech.edu/bitstream/handle/1853/2105/tps-469.pdf

 

 

PREDICTION OF PAPER COLOR: A PROCESS SIMULATION APPROACH

IPST Annual Research Review

 

https://smartech.gatech.edu/bitstream/handle/1853/179/a31667.pdf

 

 

Simulation modelling and analysis of a JIT production system

Mayank Chaturvedi, Damodar Y Golhar
1992/1/1
Production Planning & Control
Volume 3 Issue 1 Pages 81-92
Taylor & Francis Group

My Research Page at Bepress.com